Top Hss Spiral Point Taps Reviews

YAKAMOZ 30Pcs Thread Repair Insert Kit Damaged Threads Rethreading Drill Bit Taps Tool Set for Helicoil Type Metric M6 Internal Screw Holes Repairing

Master helicoil thread repair kit used for creating stronger internal threads in all metals, composites, polymers and other materials by repairing damaged or stripped internal threads and regaining the original thread size..
304 Stainless thread inserts create longer lasting durable threads, increase the possibility of higher torque application in weaker metals..
Master thread repair kit includes a collection of tools including HSS drill, tap, thread inserts, installation tool, break pin tool..
Metric Size: 5pcs HSS drill bits, 5pcs HSS taps, 5pcs break pin tools.
Includes 25 Each thread inserts: M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5.
SAE Size: 5pcs HSS drill bits, 5pcs HSS taps, 5pcs break pin tool.
Includes 25 Each thread inserts: 1/4''-20, 5/16''-18, 3/8''-16, 7/16''-14.

Check Stock

OXMUL Step Drill Bits for Metal, 3/16 to 7/8, M2 HSS, Duty for Stainless Steel, Mild Steel, Hard Metal, Aluminum, Wood, Copper, PVC, 12-Steps. 2-Spiral-Flute. #201

[M2 HSS Coated] Made of M2-Coated HSS, this stepped Drill Bit have 5X Longer Life of Regular Drill Bit. This Step Bit drill 2X Faster for Stainless Steel, Hard Metal, Mild Steel, Galvanized Steel, Aluminum,Iron, Wood Plate, PVC and Copper. If you want to drill faster and many holes on metal, then please choose this step drill bit.
[Duty for Stainless Steel] A test. Drill in 1.3mm thick Stainless Steel square pipe. This Step Drill bit successfully drilled 12 holes. But another Titanium Step Drill only drilled 1 holes, then blunt.
[12 Steps & 2-Spiral Flute] Drills 12 different hole sizes, from 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4" 13/16" to 7/8". 2-Spiral Flute:Clears Chips faster.
[118° Split Point Tip] Split Point tip prevents "walking," gets fast starts, and eliminates the need for pilot/starting hole.
[3/8" Tri-Flatted Shank] Fits into power tools chuck securely and eliminates slip.

Check Stock

DelitonGude Metric M5 Machine Screw Tap 10pcs 5% Cobalt Spiral Flute Drill Taps Metric M5 Thread Tapping Tool(M5)

Great product and very good quality. Made from M35 Hight-speed Steel and 5% Cobalt.The surface was nitrogen treated,which does't rust, very durable.Size:M5X0.8mm.
Used to make new threads or re-thread damaged or jammed threads.Spiral groove taps have a longer service life than ordinary straight groove taps and can be used repeatedly..
Spiral Flute design, well chip removal, Easy tapping.With spiral flute taps, it is not necessary to repeatedly advance and retreat the taps and chips during tapping, which effectively improves the tapping efficiency.
because the chips are unobstructed, the chips will not be blocked in the narrow flutes..
Strong Box package Included: 10Pcs Spiral flute Metric Taps.
Suitable for taping Blind hole,Such as Steel Cast Iron, Aluminum Alloy and other non-heat treater Metal,Hardness less than HRC30..

Check Stock

Champion Cutting Tool Brute Platinum XL22-1/4-20 Heavy Duty Spiral Point Tap: (Individual Pack)- MADE IN USA

Heavy duty spiral point taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
Ideal for through holes applications since spiral point quickly Shears and ejects chips ahead of the tap.
Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life.
Recommended for use with Brute xlt Tapper and Brute Lube Fluid. Can also be used in handheld tap wrench.

Check Stock

Champion Cutting Tool Heavy Duty Spiral Point Tap:XL22-5/16-18-Made in USA (12 per pack)

Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.

Check Stock

Champion Cutting Tool Heavy Duty Spiral Point Tap:XL22-3/8-16-Made in USA (12 per pack)

Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.

Check Stock

XtremeAmazing Set of 5 HSS NPT Pipe Tap Set 1/8, 1/4, 3/8, 1/2 and 3/4 Inch

Taps Size: 1/8''-27 NPT, 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT.
High quality HSS material, cutting edges clean and sharp..
With a center hole drilled in all taps, easy to use in a drill press..
Package Contents: 5 x NPT Pipe Tap SetHigh quality HSS material, cutting edges clean and sharp..

Check Stock

Drilling, Reaming, Tapping and Milling on the Drill Press (DVD)

High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.

Check Stock

Champion Cutting Tool Brute Platinum XLT Tapper: Power Tapper, Tapping Tool

High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.

Check Stock

Wolfride 9pcs Titanium Spiral Flute Tap Set Metric Machine Tap Set M2 M2.5 M3 M4 M5 M6 M8 M10 M12

Made from HSS6542, coated with titanium, high hardness and rust resistance, long service life..
Tap Size: M2*0.4, M2.5*0.45, M3*0.5, M4*0.7, M5*0.8, M6*1, M8*1.25, M10*1.5, M12*1.75..
Spiral flutes, good chip removal effect, can tap to the bottom of the blind hole. M2-M6 pointed head, M8-M12 flat head..
Can be used for processing iron, aluminum and other materials. Like stainless steel, cast iron and other difficult to machine materials, please choose cobalt taps..
Used on drilling machines, tapping machines, CNC and milling machines, not for hand electric drill..

Check Stock

SYHML-SHOP Multipurpose Manual Survival Drill Bit,Scotch Eye Wood Auger Drill Bit for Bushcraft and Camping 7/10/20/25mm (Size : 10mm)

Precision ground spiral groove for maximum drilling progress and tool life as well as excellent concentricity.
Made of high-speed steel (HSS) according to DIN 338 Right-hand cutting spiral groove type N, 118 ° point angle, Tapered section..

Check Stock

6Pcs 2-in1 Combination Drill and Tap Set TOPINCN Titanium Coated HSS Metric Hex Shank Screw Taps Tool Set

¡¾HIGH QUALITY¡¿ - 100% brand new and high quality. These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
¡¾USE FOR TAPPING VARIOUS THREADS¡¿- There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
¡¾SPIRAL FLUTES¡¿ - Taps are designed with spiral flutes and the chip clearing process would be better. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
¡¾SMOOTH TAPPING¡¿ - They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.

Check Stock

CaRoller Drill Bit Set 13 Piece Twist Hex Shank Quick Change High Speed Steel Titanium Coating for Metal, Aluminum Alloy and Plastic Wood 1/16' to 1/4'

✔【PREMIUM HSS TITANIUM COATING】Industry grade 4341 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. Titanium coating increases wear-resistance and durability..
✔【FULLY GROUND PROCESS & 135° SPLIT POINT】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° Split Point with straight shank prevents walking and makes drilling precise. No center punch is needed..
✔【Quick Change】1/4 inch hex shank fits into all power tools more easily and securely, specially for locking into quick change chuck..
✔【MULTIPLE APPLICATION】Small Drill bits for soft metal, wood, plastic, steel within 5mm thickness, aluminum alloy and other soft metals. Ideal for DIY projects, household maintenance and repair.NOT for glass, ceramic or concrete drilling..
✔【Specifications】13pcs titanium drill bits set, include 1/16", 564", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4" bit set with 1/4 hex shank..

Check Stock