Top Hss Spiral Flute Bridge Reamer Bit Reviews

OXMUL Step Drill Bits for Metal, 3/16 to 7/8, M2 HSS, Duty for Stainless Steel, Mild Steel, Hard Metal, Aluminum, Wood, Copper, PVC, 12-Steps. 2-Spiral-Flute. #201

  • [M2 HSS Coated] Made of M2-Coated HSS, this stepped Drill Bit have 5X Longer Life of Regular Drill Bit. This Step Bit drill 2X Faster for Stainless Steel, Hard Metal, Mild Steel, Galvanized Steel, Aluminum,Iron, Wood Plate, PVC and Copper. If you want to drill faster and many holes on metal, then please choose this step drill bit.
  • [Duty for Stainless Steel] A test. Drill in 1.3mm thick Stainless Steel square pipe. This Step Drill bit successfully drilled 12 holes. But another Titanium Step Drill only drilled 1 holes, then blunt.
  • [12 Steps & 2-Spiral Flute] Drills 12 different hole sizes, from 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4" 13/16" to 7/8". 2-Spiral Flute:Clears Chips faster.
  • [118° Split Point Tip] Split Point tip prevents "walking," gets fast starts, and eliminates the need for pilot/starting hole.
  • [3/8" Tri-Flatted Shank] Fits into power tools chuck securely and eliminates slip.
Check Stock

5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

  • Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
  • Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
  • Size Infor: Length of chucking reamer is 6.5 inch.
  • Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
  • Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stock

uxcell 13.75mm-15.25mm Cutting Diameter HSS Adjustable Hand Reamer Milling Cutter

  • Cutting Hole Size : 13.75mm-15.25mm/ 7/13.
  • Square End Size : 6 x 6mm/ 0.2" x 0.2"(L*W).
  • Total Size : 160 x 14mm/ 6.2" x 0.5"(L*Max.D).
  • Package Content : 1 x Adjustable Hand Reamer.
Check Stock

uxcell Hand Reamer 5mm Alloy Tool Steel H8 6 Straight Flutes Hand Milling Cutter Tool 2Pcs

  • The reamer range is 15/32 inch to 1-1/2 inch..
  • Product includes 11Pcs high speed adjustable hand reamers H4-H14..
  • The adjustable reamer is made of HSS(high speed steel) with good hardness and toughness..
  • Adjustable reamer is straight flute with straight handle..
  • The reamer is suitable for drilling machines and other machine..
Check Stock

OCGIG 6-65mm Large Titanium Coated Step Drill HSS Spiral Groove Cone Drill Bit Hole Cutter

  • Material:：High Speed Steel(HSS) with Titanium Coated.
  • Self starting：no need for a pilot hole.Cobalt coated to reduce friction and run at cooler temperature..
  • Spiral Design：3 Flute spiral blade design makes the cutting faster and smoother, and automatically deburred from the hole when the drill bit is drilled.
  • Application：Suitable to cut holes in a variety of material like iron plate, aluminum plate, insulation boards, PVC sheet, ect.
  • Package includes：1 x 6-65mm HSS Groove Step Drill (13 Steps:6mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm).
Check Stock

COMOWARE Center Drill Bit Set - Countersink Lathe Mill Tooling Set, HSS, M2

  • ...n prolong the service life, enhance wear resistance and remove chippings clearly. HSS are harder and tougher than other materials..
  • PLAIN STYLE 60°ANGLE: Center drill bit can be used to process the centering hole and countersink of general material. Plain style 60°angle can guide twist drill bits to process holes..
  • SPIRAL FLUTE: Spiral groove helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process. The precision ground surface is corrosion resistance to achieve better using effects and prolong the working life..
  • WIDE APPLICATIONS: It is suitable for mold steel, carbon steel, cast iron, stainless steel, thread mold, a material with high hardness, wear-resistance and toughness for precise positioning before drilling, so as to facilitate the efficiency of subsequent drilling..
  • SET INCLUDING & LIFETIME GUARANTEE: Total 5 pieces center bits(#1,#2,#3,#4,#5) with Box Package can be used to drill holes in different sizes. We stand behind all of our high quality products so we offer a lifetime No Question on our drill bits. Please contact us (through Amazon if past the standard return window) and we will be pleased to assist you..
Check Stock

5/8 Drill Bridge/Construction Reamer with 1/2 Shank Chuck,HSS Taper Bridge Reamer Bit Tool for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole

  • The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our reamer bit aligns and enlarges pre-drilled holes ready for bolting..
  • Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8" before using our 5/8" Bridge/Construction Reamer..
  • The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm..
  • The 5/8" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 5/8". At first there must be a 3/8" pre-drilled hole,then ream out to 5/8"..
  • Commonly used in bridge,construction,steel erection and automotive truck trailer industries,specially use in structural materials such as steel, metal, alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..
Check Stock

FTG USA Replacement Tapered Countersink Drill Bit Set 3 Pc (#10) 3/16' Countersink Bit Same Size Bit Replacement Only, Countersink Replacement Drill Bit FTG Maximum Torque Wood Bits Secured with Pin

  • Replacement tapered counter sinker drill bit set 3 Piece #10 (3/16") bit replacement Only (Without the 4 Flute cutter countersink counter-bore), made to replace the 3/16” bits of #10 countersink drill bit set for wood , with 1 Hex Wrench (1/8 inch Allen Key) included. Replacement bit countersink with hex shank compatible with 1/4" standard Quick Change chuck including impact drills.
  • Countersink replacement bits made for countersink drill bits for wood. with wider flute for increased chip flow. Replacement drill bits have logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Counter sinker drill bit replacement set, drill bits secured with pin, professional FTG drill countersink set Maximum Torque. Packaging set combination unique design protected by US Copyright Office.
  • Replacement countersink drill bits with pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. All FTG countersinks hex drill bit sets with tapered countersink bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink replacement drill bits designed as to work as wood drill bits. All same size replacement tapered drill bit for drill countersink.
Check Stock

OCGIG Large Spiral Groove Step Drill HSS Cone Bit Hole Cutter Stepped Up Unibit 6-60mm 12 Steps for Aluminium Metal Wood PVC

  • Material：HSS4241, High hardness, rustproof, solid and durable.
  • Split Point Tip：Increases cutting speed with self-centering and prevents walking.
  • Spiral Design：2 Flute spiral blade design makes the cutting faster and smoother, and automatically deburred from the hole when the drill bit is drilled.
  • Application：Suitable to cut holes in a variety of material like iron plate, aluminum plate, insulation boards, PVC sheet, ect.
  • Package includes：1 x 6-60mm HSS Groove Step Drill (12 Steps:6mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm).
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to dri....
Check Stock

Accusize Industrial Tools 9/16'' H.S.S. Aligning Reamer with 3/4'' / 0.75'' Weldon Shank, Spiral Flute, 0521-0916

  • HSS reamer has a specially designed cutting geometry that is designed to allow this aligning reamer.
  • Used in a magnetic drill which has ¾” Weldon shank..
  • The unique multi-flute design for a fast smoother cut and better finishing..
Check Stock

Gunsmithing At Home For Beginners And Novices

  • 49-PIECE MULTIFUNCTIONAL SET- 13+1pcs nut remover set and 3/8"-1/4" hex adapter, 6pcs spiral screw extractors, 13pcs multi-spline screw extractors, and 16pcs left hand cobalt drill bits..
  • VARIOUS SPECIFICATIONS AND SIZES- The set contains four types of 49 models of parts including metric and imperial sizes such as: 13mm, 9/16", 5/8", 17mm, 11/16", 3/4". You can choose the suitable size according to the size of your fasteners to meet various job requirements..
  • HIGH CARBON STEEL AND HSS MATERIAL-The set is made of High carbon steel and HSS materials. The spiral pattern design can provide sufficient gripping force to facilitate removal. High-quality materials can be used for fasteners of various metals. Please note: Cobalt drill bits should not be used for stainless steel..
  • WIDE RANGE OF APPLICATIONS- Spiral flute extractors are perfect for common fasteners. The mult-spline extractors are useful for higher torque and lower profile tools, while the bolt extractors are for freeing partly-exposed fasteners. The kit also includes a left cobalt drill bit for fasteners, which can be used to help drill t....
Check Stock

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

  • FTG 4TO12P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • Bits Secured with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood....
Check Stock