Top Hotend Kit Reviews

BCZAMD 3D Printing Upgrade Parts Ender 3 Direct Drive Extruder Conversion Kit Complete Set Requires No Firmware or Wiring Modification fit for Ender 3/ Pro/Ender 3X/ CR10 Series Printer Accessories

1. Fits perfectly on your creality series printers, include Ender 3 Pro, Ender 3, Ender 5, CR10.
2. Material: no 3d printed parts, all metal main plate, comes with a kit, so you need to assemble by yourself, install instruction, please reference....
3.This kit is a great little light kit that moves your extruder from the side with a bowden line to the top of your hot end. It obviously adds the....
4. Work well for most filament, expecial very good for flexible filaments, had no problem printing TPU with this setup..
5. Compatible with most extruder hotend, but you need to print a printing before install on V6 hotend, please reference on thingiver..

Check Stock

Sovol SV06 All Metal Planetary Direct Drive Extruder Coming with Stepper Motor Without Fans and Auto Leveling

This half kit of extruder comes without hotend, fans and auto leveling..
We also sell the hotend and PEI build plate of SV06 on Amazon now. If you have spare needs you can order them..
More SV06 accessories will be listed for sale on Amazon. If you want to order any accessories we have not sell on Amazon temporarily please let us know through Amazon message. All accessories of SV06 can be ordered from us..

Check Stock

Creality 3D Capricorn Bowden PTFE Tubing 1 Meter Tube Cutter XS Series with 5 pcs Nozzles for 1.75mm Filament Ender 3 Ender 3 Pro, Ender 5, CR-10,CR-10S 3D Printer

Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend..
Capricorn PTFE tubing ensures the highest quality prints at any given temperature. This XS series tubing is rated for high temperature printing, and also boasts greater lubricity leading to less friction, less slippage, and less wear. Great for flexible filaments! Also guaranteed with to have an inner diameter accurate to within 0.05mm, enabling fine tune retraction settings with more precision than ever before!.
The perfect replacement kit if the your stock hotend has failed or constantly jams.Capricorn tubing provides enhanced precision for retraction settings, meaning less stringing on prints once calibrated..
Comes with 1 Meter Tubing, five Brass nozzles and one cutter.

Check Stock

BIGTREETECH Direct Metal Hotend with MK8 Nozzle CR10 Extruder Heatsink for CR10 Ender 3 Upgraded 3D Printer Parts

⭐【Item Name】: All Metal MK8 Hotend CR10 Extruder Conversion Kit compatible with Creality Printers..
⭐【CR10 Heatsink Hotend】: Strong and durable, imported aluminum quality, efficient heat transfer,Compatible with CR10S, Ender 3 Series and BIQU....
⭐【Package Including】: 2 * 4mm PTFE Tube.
Compatible with 100K NTC 3950 thermistors.
Uses MK8 Nozzle and 6 * 20mm Heater Cartridge..
⭐【Warm Notice】When replace the honted, should preheat the honted, setting the nozzle to 234°..
⭐【Technical Support】If you have any question, please feel free to QA or tell us through Amazon, we will get back to you within 24h..

Check Stock

[Gulfcoast Robotics] All Metal Hotend Conversion Kit - Polished Titanium Heatbreak for Creality Ender 3 Pro and V2 Ender 5 Pro and Plus and CR10 Series 3D Printers

Now compatible with the Creality Ender 3 V2 and Ender 3 Max.
All Metal Hotend Conversion Kit is a drop-in installation for Creality 3D Printers.
Fits the Creality Ender-3, Ender-3 PRO, Ender-5, CR10, CR10S and more.
Polished Titanium Heatbreak prevents hotend clogs caused by heat creep.
Silicone sock insulates the heater block for faster heat-up times and stable temperatures.

Check Stock

Dragonfly Taichi Hotend Dual Extrusion 2 in 1 All Metal Hot End Double Feed 2 Color 2 Filament Extruder for CR10 Ender 3 Pro V2 Ender 5 Pro Plus CR10 V2 3D Printer Part

☀️【2 in 1 Dual Extrusion Hotend】Taichi hotend features integrated double feed port design, which meets the needs of two filaments or multi....
☀️【All Metal Hotend】The heatbreak of TAICHI hotend is made of 0.25mm thin-walled titanium alloy for high wear resistance, great heat....
☀️【Quick Nozzle Changing】The titanium alloy support screws of TAICHI hotend can reach low heat conduction and excellent heat insulation so as....
☀️【Conical All Metal Heatbreak】TAICHI’S conical designed all metal heatbreak fit closely with heatsink so that it’s heat dissipation is....
☀️【Compatible with All Filaments】TAICHI hotend is compatible with all thermoplastic filament including typical composite fiber filament like....

Check Stock

Authentic Creality Assembled Hotend Kit for Ender 3 / Ender 3 Pro/Ender 3 V2 with Capricorn PTFE and Upgraded Pneumatic Fittings, Thermistor, Heating Element, MK8 Sock and 4 Extra Nozzles

This assembled replacement stock hotend from Creality is a plug and play replacement or spare unit for all Creality brand printers including Ender series as well as the CR series printers. See product description for more info on CR series. Also included are some extra brass nozzles, a hotend sock and upgraded Capricorn PTFE tubing which drastically improves the performance of this part over its standard PTFE option..
Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. Capricorn PTFE is also manufactured to the highest specifications for 1.75mm filament to ensure that there is no space in the tube once the filament is inside. This perfect fir ensures much better results on retaction moves and helps to ensure a steadier and even flow rate from your hotend!.
Upgraded Pneumatic fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer manufacturers with plastic teeth or cheap locking mechanisms. The extruder fitting is a PC4-M6 and the hotend fitting is PC4-M10. These are the standard sizes for most open source 3D printers and the same sizes used by most Chi....

Check Stock

YuenPau MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor

Compatibility: Fit with MK10 hotend aluminum cooling block, such as FlashForge Creator Pro \ Creator X \ Dreamer \ finder \ inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S \ Duplicator 4X \ Duplicator i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc..
Quantity and specification: 1 piece MK10 hotend kit, it include these parts: 0.4mm nozzle with M7 thread 1 piece, throat with 1.75mm PTFE tube 1 piece, aluminum heater block 1 piece..
Brass material advantage: The heat conductivity of brass is is several times that of stainless steel and hardened steel, It is the most suitable material for extruder nozzle to ensure accurate print temperature..
Material: Nozzle is brass. Throat is stainless steel. Heater block is aluminium alloy..
Improved Version: An M3 thread hole has been added on the aluminum block to making it suitable for both M3 and M4 thermistor.

Check Stock

Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades

...r – Instantly provide improved print quality and reduce filament slipping by firmly grasping the filament between two threaded wheels locked together. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which is able to feed much more filament into the hotend in the same period of time than stock plastic extruders..
100% Original Capricorn XS Bowden Tube for 1.75mm filament – Capricorn ptfe tube is regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. It is rated for withstanding the highest temperature in the market which is perfect for printing filaments such as PLA, PETG, ABS, Nylon. Fits for 1.75mm 3d printer Filament..
Creality Die Springs – Those springs are extra firm and help to hold the bed level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends..

Check Stock

Bilway 3D Printer Ender 3 v2 Printer Creality Ender 3 v2 3D Printer with Silent Mainboard Meanwell Power Glass Bed and Resume Printing 220x220x250mm Ideal for Beginners

1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less....
1* PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
2 * PC4-M6 and PC4-M10 Pneumatic Fitting to secure PTFE in extruder and hotend..
2 * MK8 hotend socks are also provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and more....
2*0.4mm nozzles of non-stick silicone material Help to keep the hotend temperature extremely stable.【Note】If have any using problem. Please kindly....

Check Stock

Haldis 3D Printer Bowden Extruder Hotend Kits,Upgraded 24V Volcano All Metal V6 J-Head Extrusion Hot End Parts with 5 Pieces Brass Nozzle + 3 Cooling Fans 3010 for All 1.75mm E3D V6 Makernot

【UNIVERSAL UPGRADED V6 HOTEND KIT】: Compatible with all 1.75mm E3D V6 Makerbot 3D printer.
HotEnd featuring an all-metal design with....
【STANDARD BRASS NOZZLE】: Nozzles are made of high quality brass,Heavy duty and provide a long service life.Easy to install and change.include 5....
【PREMIUM COOLING SYSTEM】: 24V / 40W heating, the temperature can reach up to 350 ° C，and we adopt 3 pieces cooling fans (30*30*10mm).Multiangle....
【ASSEMBLY NEEDED】: The package include all parts.No-Solder, No-Tape, No-Adhesive Assembly And Maintenance，Easy to Install..
【QUALITY GUARANTEE】: We are committed to providing more reliable product and better customer service to our customers,if you aren't 100%....

Check Stock

TRONXY Original Extruder Assembled MK8 Hotend Kit for 3D Printer with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle，Bowden Extruder kit

100% TRONXY Orginal MK8 Full Set Hotend Kit.
Suitable For TRONXY XY-3 Seriers 3D Printer.
Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon).
MK8 Extruder Hot End Kit With thermistor 100K and Heater 24V 50W.
Thermistor and heater cable length: 1.2 m ,Feed tube:50cm.

Check Stock

Creality Upgrade 3D Printer Kit with Capricorn Premium XS Bowden Tubing 1M， PTFE Teflon Tube Cutter, Pneumatic Fittings and MK8 Socks and Extra Nozzles for Ender 3/3 Pro/5/Vyper/Voxelab Aquila

1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills..
1* PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting..
2 * PC4-M6 and PC4-M10 Pneumatic Fitting to secure PTFE in extruder and hotend..
2 * MK8 hotend socks are also provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and more consistency..
2*0.4mm nozzles of non-stick silicone material Help to keep the hotend temperature extremely stable.【Note】If have any using problem. Please kindly contact us(seller) via “ask a question” find us directly, cause our customer service will respond to you within 24 hours..

Check Stock