Top Hot Work Die Steel Reviews

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
Tips: Recommended feed rate: general steel: 6-15m/min.
cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..

Check Stock

TEMCo TH0364 Dimple Die for 1-1/4” Actual Hole Size

Dimple Die for 1-1/4” Actual Hole Size.
Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
This dimple die set creates flared holes. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
Recommended Compression Tool: TEMCo Industrial TH0037 Knockout Punch Set or any other electricians knockout punch set..

Check Stock

40 Piece Tap and Die Set,SAE Inch Sizes, Essential Threading Tool with Complete Accessories and Storage Case, for Cutting External and Internal Threads, SAE Thread Types: NC, NF, NPT, by NAKAO

➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
➤[Package include]: 17xTaps for Internal Threads.

Check Stock

Donkey Kong Mariokart

Hot Wheels partners with fan-favorite Mario Kart for die-cast character karts with gliders in 1:64 scale!.
Each vehicle features a different Mario Kart character with unique kart and glider combinations -- look for fan favorites like Mario and Yoshi!.
Vehicles without gliders attached are designed to work with Hot Wheels track, the replica karts inspire kids to race, stunt and drive adventure!.
Kids ages 3 years old and up will love recreating their favorite scenarios from the video game sensation!.
Fans of Mario Kart and Hot Wheels will want to collect them all..

Check Stock

Muzerdo 131PCS Sae and Metric Coated Bearing Steel Tap and Die Rethreading Kit

...the set are handles for turning. The collection also consists of screw extractors and charts to determine the correct drill and taps to match the thread size and pitch. Some sets may contain twist-lock guides, coarse and fine taps, and other tools at a higher cost..
Instead of other kits which are made of low carbon steel, our kit are made of *** bearing steel*** which are more stronger, good abrasion performance. An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel. These cutting materials are suitable for threading steel, cast steel, cast iron, non-ferrous metals, plastics, softwood, and hardwood..
Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.

Check Stock

Hot Wheels Super Mario Character Cars Mario Vehicle 1/7

It's an instant collection with Hot Wheels Mario Kart 4-Packs of character-inspired replica karts that bring the video game action to life!.
Each set features 4 1:64 scale die-cast vehicles that work on Hot Wheels track!.
The karts feature fan-favorite characters with an exclusive model in each pack!.
Makes a great gift for fans, collectors and kids ages 3 years and older!.
Combine with other Hot Wheels Mario Kart vehicles and playsets to level up!.

Check Stock

Ridgid 47760 Universal Die Head 1/4-3/8 NPT HS

accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....

Check Stock

Toolly 32pcs Tap and Die Set, Metric Hardened Steel Tool Set, Essential Threading & Rethreading Tool with Storage Case Perfect for Auto and Machinery Repair

...increase your productivity and act as an important part to your work..
【Tapered Teeth Design & Versatility】Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily. Perfect for creating new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel..
【High Quality & Durable】Tap and die set adopts premium hardened steel material. The screw thread tapping tool is durable to use. The better the material the tougher the tap and die so they ensures durability and tool longevity to withstand professional uses..
【SIZE LABLED】All of them are clearly labled with size for you to find quickly, and be able to pull the right size out of the box when you need it. It is perfect for creating threads on vehicles and machinery..

Check Stock

YON.SOU. Air Die Grinder - 1/4\

...nd precise to control with a clear view of working surface. You wouldn't worry about tight spaces and small jobs anymore with this 90 degree die grinder..
⚙️ POWERFUL AND DURABLE: The pneumatic die grinder features a 0.3 HP motor whose free speed could be up to 20,000 RPM. Inner movement part is made of tungsten steel which could be more resistant to high temperature to prevent overheat. This 1/4" die grinder has long service life with aluminum housing and ball bearing construction..
⚙️ COMPACT&LIGHTWEIGHT DESIGN: The compact and lightweight designed pneumatic angle die grinder is super easy for maneuverability and brings more accuracy, ergonomic designed die grinder body is perfect for one-handed grip. The 90 degree angle head brings more accuracy and possibility to those tight spots and hard reaching jobs..
⚙️ SAFE&EASY to USE: The safety lock of the air angle grinder could prevent accidental engagement, you wouldn't get hurt even if you just start to learn to use the air die grinder. The air inlet filter could keep the die grinder from contamination. Built-in regulator makes it easy to control air die grinder's speed..
⚙️ VARIOUS APPLICATIONS: This angle die grinder tool is air-powered, you should connect the air grinder to an air comp....

Check Stock

z-dup Repair Kit

37˚ DOUBLE FLARING ADAPTERS in 3/16”, 1/4”, 5/16”, 3/8”, 1/2” sizes.
37˚ DOUBLE FLARE DIE SETS in 3/16”, 1/4”, 5/16”, 3/8”, 1/2” sizes.
37˚ CONE constructed of high quality machined steel.
CREATE PERFECT PRODUCTION QUALITY FLARES on annealed stainless steel tubing, terne plate steel tubing, soft aluminum and soft copper tubing.
PRIMARY USES INCLUDE racing, restoration, hot rods, aviation.

Check Stock

TEMCo TH0370 Dimple Die Set Tool Kit 8pcs: 1/2' 3/4' 1' 1-1/4' 1-1/2' 1-3/4' 2' 2-1/2'

Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
Eight Dimple Dies: 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2". (Actual Hole Size).
This dimple die set creates flared holes most commonly used on automobile parts fabrication. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
This dimple die set works with a hydraulic driver and cylinder tool most commonly used with hydraulic knockout sets like our TEMCo THA043 and TH0372..

Check Stock

uxcell 5/8-11 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....

Check Stock

uxcell 5/8-24 UNEF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller (....

Check Stock