Top Hot Water Condenser Reviews

Laboy Glass Liebig Condenser with 24/40 Joints 300mm in Jacket Length Used in Reflux or Distillation Aapparatus Chemistry Lab Glassware with 10mm Glass Hose Connections

  • SIMPLE DESIGN EASY SETUP----The liebig condenser is the most basic water-cooled condenser,also named “water condenser”,which consists of an inner straight tube surrounded by an outer jacket tube,the cool water flows through the outer jacket to condensate the vapor in the inner tube,having a better cooling performance than air condenser..
  • COMMONLY USED ----A liebig condenser commonly used in a distillation apparatus,also in reflux process and soxhlet extraction can be placed in vertical and oblique position as a reflux condenser and a distillation condenser.As jointed glassware part,it is usually used with a round bottom flask,a three way distillation adapter,a take off adapter to assemble a distillation or reflux setup..
  • DIMONSIONS----It is designed with 24/40 standard taper joint at top and bottom,and two glass hose connectionsconnecting the inner tube through which coolant flows,the lower hose used for coolant inlet,and the higher hose used for coolant outlet.With the jacket length of 300mm.
  • HIGH QUALITY---Laboy glass condensers are all made of high quality boroslicate glass according to ASTM E438,heavy wall design,durable and reusable.The ground joints are precisely grounded according to US standard..
  • BUY WITH CONFIDENCE----100% 90 DAY MONEY ....
Check Stock

220V 50HZ 0-150rpm High Performance Lab/Industry Distillation Purification Rotary Evaporator Rotavapor SENCO Equipment w/Motor Lift, Digital Heating Bath, Condenser Full Set of Glassware Kits RE-52CS

  • Manifold for holding solvent recovery condensers.
  • Flow meter and rigid supply tube for condenser water supply.
  • Condenser water supply/drain manifold connects to a bench cold-water tap, or a refrigerated water chiller for improved control of condenser temperature and water conservation.
  • Parallel water supply/drain manifolds with quick disconnect tube fittings.
Check Stock

Laboy Glass West Condenser Liebig Reflux Distillation Column with 24/40 Joints 190mm in Jacket Length Organic Chemistry Lab Glassware with 10mm Glass Hose Connections

  • HIGHER COOLING PERFORMANCE-----A West condenser is a thinner version of the Liebig condenser,with narrow annular space that allows for the increased flow rate of water to provide high cooling efficiency.It consists of an inner straight tube surrounded by an outer jacket tube,the cool water flows through the outer jacket from bottom to top to condensate the vapor in the inner tube. The fused-on narrower coolant jacket may render more efficient cooling with respect to coolant consumption..
  • WIDELY USED-----A west condenser can be both used in a reflux and a distillation apparatus .In the reflux apparatus, just as the graham condenser,Dimroth condenser,coiled condenser,liebig condenser does,it works with round bottom flask, drying tube,separatory funnel or additional funnel.In the distillation apparatus,it used to condense the vapr into liquid and drip to a receiving flask with a take-off adapter..
  • DIMONSIONS----It is designed with 24/40 standard taper joint at top and bottom,and two glass hose connections connecting the inner tube through which coolant flows,the lower hose used for coolant inlet,and the higher hose used for coolant outlet.With a jacket lenght of 190mm.
  • HIGH QUALITY---Laboy glass condensers are all made of high quality boroslicate glass acc....
Check Stock

Clover D7A Water Dispenser -Hot and Cold, Bottleless With Install Kit -Black

  • ECONOMICAL: Without the use of plastic bottles, this Clover D7A saves you hundreds per year. Instead, the water comes from your existing plumbing for cleaner water and extra efficiency.
  • EASY CLEAN-UP: The Clover D7A water dispenser requires little maintenance, just remove the one piece ABS drip tray for occasional cleaning..
  • EFFICIENT COOLING: This Hot and cold water dispenser has an ultra-efficient condenser that's cooled via convection and operates quietly.
  • STAINLESS STEEL TANKS: The cold water tank is constructed of hygienic stainless steel, which is specifically designed to be contaminant-resistant and protect your health.
  • INCLUDES: This SKU includes the D7A Bottleless dispenser plus installation kit for those who already have filtered water. You will love the convenience of no bottles.for those who already have filtered water..
Check Stock

Laboy Glass Allihn Condenser Reflux for Soxhlet Extractor with 55/50 Joint 300mm in Jacket Length 405mm Overall Height Distillation Apparatus Organic Chemistry Lab Glassware

  • This is a special allihn condenser only with 34/45 bottom male joint inserting to a soxhlet extractor body ,the size is larger with an inner tube consisting of a series of bulbs which increase the surface area availiable for vapor condensation surrounded by an outer jacket tube.This design can improve the cooling performance,in practise, the allihn condenser can be replaced by a liebig condenser, coiled condenser,dirmoth condenser or graham condenser used as a reflux condenser..
  • In a soxhlet extraction apparatus, this allihn condenser with lower male joint attached the soxhlet extractor body cools the solvent vapour from the boiling flask and drips back down into the thimble containing the solid material. With 10mm O.D.hose connections at top and bottom accommodating 8mm I.D.rubber tubing,the cool water flows in from the lower hose ,and flows out from the upper hose..
  • The glass allihn condenser is with 55/50 male joint, 300mm in jacket length 405mn overall height.
  • Laboy glass ware are all made of high quality boroslicate glass according to ASTM E438,heavy wall design,durable and reusable.The ground joints are precisely grounded according to US standard..
  • 100% 90 DAY MONEY BACK GUARANTEE If you are not satisfied for any reason, simply return for a fu....
Check Stock

The Distillery

  • Sufficient Capacity: Alcohol still machine owns 9. 6 us gal real capacity, able to distill 38 liters of raw material by heating to selectively boil and then cooling to condense the vapor. Boiler barrel: 13. 8" X 15. 7" (35 x 40 cm). condenser: 7. 9" X 5" (20 x 13 cm). thumper: 7" X 4. 3" (18 x 11 cm). all parts are made of food grade material including silicone, stainless steel and copper..
  • Speedy Cooling: This water Distiller adopts open-type cooling method, copper coils with rapid thermal conductivity assures promising cooling performance together with large contact area with the coolant, providing a rather low temperature of distilled product. Upgraded with two kegs (thumper and condenser), perfect for adding flavors to your product! Circulating water pump attached to save cooling water. Rubber pads under condenser insulates heat and quickens cooling..
  • Convenient Usage: Precise thermometer with double display of Celsius and Fahrenheit on the lid for easy monitoring of wine temperature during distillation process. Circulating water enters through lower inlet and drains from upper outlet for efficient cooling..
Check Stock

VEVOR Alcohol Still 5 Gal 19L Water Alcohol Distiller Copper Tube With Circulating Pump Home Brewing Kit Build-in Thermometer for DIY Whisky Wine Brandy, Stainless Steel, 3 Pots

  • Sufficient Capacity: This still provides you with a fermentation capacity of 5 gallons. Boiler barrel: 11. 8″ X 11. 8″ (30 x 30 cm), condenser: 7.9″ X 4.3″ (20 x 11 cm), thumper: 7″ X 4″ (18 x 10 cm), which can ferment up to 19 liters of raw materials. Perfect for family-together parties. All parts are made of food-grade materials, including silicone, stainless steel, and copper..
  • Rapid Cooling: The distillery kit adopts an open cooling method. The copper coil has rapid thermal conductivity and has a large contact area with the coolant, providing a lower distillation temperature. A circulating water pump is attached to save cooling water. The rubber pad under the condenser can insulate and accelerate cooling..
  • Easy to Operate: The alcohol still kit has a real-time thermometer on the lid, with a dual-display of Celsius and Fahrenheit, which is convenient for monitoring the temperature of the wine during the distillation process. The thumper keg helps discharge the hot water vapor, which helps to evaporate the alcohol for secondary distillation.
  • Durable & Tight Seal: Unlike regular tubes, we use food-grade silicone tubes, which are flexible and tough, and are not easy to bend to ensure a good seal. Four....
Check Stock

DESENNIE Shine 9.6Gal 38L Alcohol Still with Electric Circulating Pump, Water Alcohol Distiller with Thumper Keg, Copper Tube Distiller, Home Brewing Kit for DIY Whisky Brandy Extracting Essential Oil

  • ✅【DESENNIE Wine Making Kit 】DESENNIE ‘s 9.6Gal Alcohol still comes with everything you need to do a alcohol run. Including Boiler, condenser, thumper keg, thermometer. Constructed of safe red copper and stainless steel, all the parts are made of food-grade materials. Perfect for home use. Stainless steel pots are easily to clean in a kitchen sink, and light enough to lift when filled up. Boiler pot can double as a fermenter. Easy to use for both beginners and professionals..
  • ✅【Rapid Cooling】Pure copper coil tube collects all vapors and quickly condenses them to liquid. Circulating water enters through lower inlet and drains from upper outlet. Submarine pump increases the efficiency and saves water. Thick food grade silicone tubes are flex and tough enough, will not crimp in hot water, and ensure expedite water flow. Ball valve controls water flow to avoid overflow..
  • ✅【PRECISE BUILD-IN THERMOMETER】 The kit comes with an easy detachable/replaceable thermometer. It’s completely stress free to remove and replace. The thermometer displays the temperature in Celsius and Fahrenheit. Make sure the temperature is accurate when fermentation and distilling. Boiler barrel: 13. 8″ X 15. 7″ (35 x 40 cm). condenser: 7. 9″ X 5″ (20 x....
Check Stock

Fieldpiece MR45 Recovery Machine

  • Micro channel CONDENSER/Compresses more refrigerant at twice the RPMs (3, 300) and twice the horsepower (1HP).
  • Twin cylinder compressor (oil-less)/water resistance to withstand direct rain.
  • Ceramic cylinder for longer life and less friction.
  • Micro Channel Condenser/compresses More Refrigerant At Twice The Rpms (3, 300) And Twice The Horsepower (1hp).
  • Twin Cylinder Compressor (oil-less)/water Resistance To Withstand Direct Rain.
Check Stock

Giantex 10 Gal Alcohol Still, 3 Pots Stainless Steel Water, Alcohol, Oil Distiller Kit with Built-in Thermometer, Copper Tubes, Multifunctional Wine Making Boiler Kit for Whiskey, Brandy, Silver

  • Sufficient Capacity: This still provides you with a fermentation capacity of 5 gallons. Boiler barrel: 11. 8" X 11. 8" (30 x 30 cm), condenser: 7.9" X 4.3" (20 x 11 cm), thumper: 7" X 4" (18 x 10 cm), which can ferment up to 19 liters of raw materials. Perfect for family-together parties. All parts are made of food-grade materials, including silicone, stainless steel, and copper..
  • Rapid Cooling: The distillery kit adopts an open cooling method. The copper coil has rapid thermal conductivity and has a large contact area with the coolant, providing a lower distillation temperature. A circulating water pump is attached to save cooling water. The rubber pad under the condenser can insulate and accelerate cooling..
  • Easy to Operate: The alcohol still kit has a real-time thermometer on the lid, with a dual-display of Celsius and Fahrenheit, which is convenient for monitoring the temperature of the wine during the distillation process. The thumper keg helps discharge the hot water vapor, which helps to evaporate the alcohol for secondary distillation.
Check Stock

DADAKEWIN 400mm Friedrich Condenser, Joint 24/40, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 400mm/24 * 40)

  • Packing: 1 piece/pack, 400mm Friedrich Condenser, Joint 24/40, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 500mm Friedrich Condenser, Joint 24/40, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 500mm/24 * 40)

  • Packing: 1 piece/pack, 400mm Friedrich Condenser, Joint 29/29, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 500mm Friedrich Condenser, Joint 24/29, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 500mm/24 * 29)

  • Packing: 1 piece/pack, 400mm Friedrich Condenser, Joint 24/29, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock