Top Hot Melt Extruder Reviews

Creality Official Ender 3 Extruder Upgraded and 1M Capricorn Bowden PTFE Tubing 1.75mm 3D Printer Accessories Kit with Bed-Level Spring & Tube Cutter, 4 in 1 Package for Ender-3 Series CR-10 Series

✔️【Quality Assurance】Creality 100% official aluminum extruder is lightweight and strong, ensuring a more even feed rate over time as well as resisting wear. Removed pneumatic joint so as to increase gear density, it makes loading the filament easier and smoother. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed..
✔️【Original Capricorn PTFE Tube】Capricorn PTFE is well regarded as the highest quality PTFE tubing in all 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hot end..
✔️【Great Value Spare Parts】4pcs Upgraded bed-level springs are made of high-quality spring steel, fatigue and heat-resistant, durable for use. They will allow you to print at a higher speed without worrying about any wobble. One PTFE cutter with an extra sharp razor is also included to ensure that the tube is cut flat on both sides..
✔️【Easy To Install】DIY kit and you need to assemble by yourself. The full installation kit for the extruder is include....

Check Stock

CR-10S 3D Printers Original Replacement Parts/Accessories Full Assemble MK8 Extruder Hot End Kits with Nozzle 0.4mm /0.2mm /0.3mm /0.5mm fit for Creality 3D Printing Printer CR-10 CR-10S S4 S5

Creality CR10 Extruder,100% ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY.
MAIN MATERIAL OF CR10 EXTRUDER IS ALUMINUM ALLOTY /STANIESS STEEL/BRASS.
CREALITY CR10 EXTRUDER CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
MK8 CR10 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 12V 40W..
TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).

Check Stock

Designing 3D Printers: Essential Knowledge

Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs..
Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well..
Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion.
V-shape with POM wheels make it move noiseless, smoothly and durable..
Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110 degree..
Strict Test: Strict testing for key components before delivery and life-time technical supports available..

Check Stock

Upgrade 3D Printer Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing for Ender 3/Ender 3 Pro 1.75mm 0.4mm Nozzle

Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing.
Capricorn PTFE tubing: High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more....
Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.
Suitable For Creality ender 3/ender 3 Pro.

Check Stock

ADIMLab Gantry Pro 3D Printer 24V Power 310x310X410 Build Volume Resume Print Run Out Detection Lattice Glass Platform Modifiable to Upgrade to Auto Leveling&WiFi

90% pre-assembled 3d printer, dual Z-axis motors and dual Y-axis tracks, supply eccentric nuts to fasten the X/Y/Z pulleys or carriages, make the....
Titan direct extruder and dual fans to cool the hot end, make the extruder system more stable and wear resistant. The operation is more convenient....
Lattice glass is on hot end, make it easy to leveling and first layer stick and get off, the connector for the bed wire will be strong enough to....
Supply resume print and filament run out detection functions, Customer can upgrade the auto leveling& touch screen& wifi functions by self,....
ADIMLab Gantry Pro 3d printer includes: ◆The hot bed with Lattice Glass Platform ◆24V15A UL Certified Power supply ◆Titan....

Check Stock

XTC-3D - High Performance 3D Print Coating - 24 Ounce Unit

Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs..
Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well..
Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion.
V-shape with POM wheels make it move noiseless,....
Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110 degree..
Strict Test: Strict testing for key components before delivery and life-time technical supports available..

Check Stock

Creality CR-10 V3 3D Printer New Version with Titan Direct Drive Silent Motherboard Installed and MeanWell Power Supply Large Build Volume 300x300x400mm

Titan Direct Drive: The direct extruder is right above the hot end with little space in between, which enables the extruder to push the filament....
Dual Part Cooling Fans Extruder: Two part cooling fans are installed on the two sides of the hotend. This can promote to dissipate heat and cool down....
Upgraded Silent Motherboard: CR-10 V3 has adopted industrial self-developed motherboard backed by TMC2208 ultra silent driver. It demonstrates firm....
All Metal Frame and Triangle Stable Structure : It adopts all metal frame and the high quality V-profile structure , forms a firm golden triangle that....
24V/350W Meanwell Power Supply: Equipped with solid 24V/350W Meanwell power supply pairs with thermally efficient bed heater. It allows for rapid....

Check Stock

Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover×3, 0.4mm Ender 3 Nozzle×3 and 2 Pair Pneumatic Couplers

It's 100% Creality Original Upgrade Assembled Extruder Hotend..
Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills..
Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit..
With more terminal housing and pins as spare parts, in case fail installation and waste..
MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W..

Check Stock

20PCS 0.4mm MK8 Nozzles 3D Printer Extruder Nozzles + 10PCS Stainless Steel Nozzle Cleaning Needles with 2PCS Wrenches and Tweezers for Makerbot Creality CR-10 Ender 3 5

Package Include: This 3D printer nozzle set come with 20pcs 0.4mm printer nozzles, 10pcs 0.35mm nozzle cleaning needles, 1pcs curved tweezers, 1pcs socket wrench and 1pcs flat wrench.
Cleaning Needles: The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs.
Premium Material: Our MK8 extruder nozzles are made of high quality brass material. Heavy duty and durable to use for a long time. Easy to install and change.
Applicability and Compatibility: These MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.

Check Stock

AMOLEN 3D Printer Filament Marble PLA Filament 1.75mm Marble White 3D Printing Filament 1kg

MARBLE-LIKE FEEL - Special surface like marble, come along with marble’s natural and unique texture.
HIGH COMPATIBILITY - Perfectly compatible with most of the 3D Printer, 1.75mm marble pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
SMOOTHLY PRINT- Orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder.
PREMIER MATERIAL - Marble pla filament 1.75 raw materials are from USA, good performance.
HIGH PERFORMANCE - Good shaping, no bubble, no jamming, no warping.

Check Stock

Comgrow Creality 3D Printer CR-10 V3 New Version and Firmware Upgrade Silent Mainboard Resume Printing 300x300x400mm with Meanwell Power Supply Support DIY Ex

【TITAN DIRECT DRIVE】✔️The direct extruder for Creality CR 10 v3 is right above the hot end with little space in between, which enables the extruder to push the filament directly into the nozzle. Since it minimizes the distance for filament traveling to the hot end, the direct extruder is more helpful and reliable when producing 3D prints with flexible soft filaments like TPU and ABS and can help to avoid filament stringing and oozing during printing..
【DUAL PART COOLING FANS EXTRUDER】✔️Two part cooling fans of Creality large 3D printer are installed on the two sides of the hotend. This can promote to dissipate heat and cool down immediately, thus reducing jamming and poor-spillage..
【UPGRADED SILENT MOTHERBOARD】✔️ CR-10 v3 3D printer has adopted industrial self-developed motherboard backed by TMC2208 ultra silent driver. It demonstrates firm properties as well as reduces noise. 1.1.6 Version firmware, theminal runaway protection and resume printing function are pre-installed in the motherboard..
【ALL METAL FRAME AND TRIANGLE STABLE STRUCTURE】✔️ Creality FDM 3D printer adopts all metal frame and the high quality V-profile structure , forms a firm golden triangle that effectively reduces errors caused by vibrations and make....

Check Stock

100pcs Hot Melt Strips for Book Binding Machine

Thermal Binding Glue Strips, Hot Melt Binding Machine Glue Strips.
For paper hot-melt binding or book repair, etc..
Length: 11inch, Width: 2mm, 100 pieces, can tear of suitable width according to demand..
High quality EVA hot melt with strong stickiness and firm binding.

Check Stock

3M Palm Trigger

New OEM replacement Palm trigger for 3M TC & LTs hot melt applicators..
Adds comfort and efficiency when applying hot melt adhesive with the 3M(TM) Hot Melt Applicator TC and LT..
Must be used in conjunction with the Quadrack converter. 9761. You can create even, smooth adhesive beads comfortably and easily, without ever touching the adhesive..
Designed for ease of use and increased output when using the Quadrack converter..

Check Stock