Top Hose Ends Reviews

Air Conditioner Exhaust Hose with 5 Inches Diameter, Counterclockwise Thread Compatible with Portable Air Conditioner (59 Inches Length)

  • COMPATIBILITY: this air conditioner hose is compatible with portable air conditioner, replaces the original hose with 5 inch diameter and counterclockwise thread.
  • STRETCH AND SHRINK FREELY: the hose is extendable, the shortened length is 12.6 inch/ 32 cm, it can extend up to 59 inch/ 150 cm, easily extend the length of the exhaust hose to fit into anywhere you want.
  • DURABLE AND STURDY: hose is constructed from polypropylene with good flexible, durable and portable, this is a good replacement to keep your air conditioner from leaking when the essential vent hose has cracked.
  • EASY TO INSTALL: gently extend out the exhaust hose to meet up with the existing hose, line up with the both ends, clockwise rotate until it snaps into place, it's easy to install.
  • Note: please make sure this is the correct hose both the size and thread for your portable air conditioner before purchasing.
  • If you have an adapter that screws on the end, the winding direction is very important.If you have 5" ends but make sure that your ends are right hand threaded because the hose is right handed some need left hand threaded,If you have any problems about your purchase, please don't hesitate to contact us and we'll make it right.
Check Stock

Garden Hose Repair Kit 5/8 Inch Fittings Mender 3/4 Male and Female Water Hose End Replacement Set Connector with Zinc Clamp

  • ⌘【Heavy Duty】: These 5/8 garden hose repair fittings can fix and secure the ends of damaged hoses for continued use in garden hose assemblies..
  • ⌘【Leak Resistant Duty】: This garden hose mender has raised ridges (or barbs) on one end of the fitting that hold it firmly in place when it is inserted into the damaged hose, creating a leak-resistant seal..
  • ⌘【Material】: Water hose repair kit connectors are made of brass, and the clamps are made of stainless steel..
  • ⌘【Easy to Use】: Easy to connect and disconnect, male hose end repair can be uses to repair and connect the garden hose ends. Fit for ⅝" or ¾" hose fittings..
  • ⌘【Package Include】: 4 sets male and female hose end repair connector with clamp, extra 8 pack garden hose washers..
Check Stock

EVIL ENERGY 10AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

  • The female AN10 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for....
  • 10AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our....
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle....
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't....
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

SANCEON Garden Hose Quick Connector with Shut Off Valve(6 Sets), 3/4 inch Quick Connect Fittings with Ball Valve, Easy Connect and Quick Release Adapters, Male and Female(6 Pairs/12 Pcs)

  • 【Long Lasting & Durable】- Our gardening water hose quick connector with valve is made of high quality PVC and ABS plastic by mixed injection molding which is enough sturdy and durable, non-corrosive and no leaking..
  • 【Exquisite Workmanship】- We use high-precision molds for injection molding, and the thread size is more accurate.
  • The female ends will perfectly fit with the male ends to stand the higher water pressure..
  • 【Easy to Use】- With the TPR rubber coated body. You can tightly screw it on 3/4'' fittings easily in any situation.
  • Big handle On-off garden hose valve fitting provides a labor-saving switch. The quick connector is very easy to connect and disconnect, saving much time..
  • 【Widely Applications】- Suitable for garden hose, soaker equipment, faucets, lawn sprinkler, water hose nozzle, Y connector, hose splitter, hose bibs and other garden accessory or anywhere there's a standard 3/4" gardening water hose connecting device..
  • 【Great Value Package & Excellent Service】- 6 Pieces On-off Female Quick Connect with washers + 6 Pieces Male ends + 6 Extra Washers with 1 year quality guarantee, if get any problem please contact us asap, we will offer you the replacement or a full refund..
Check Stock

Cen-Tec Systems 92014 Universal Extension Vacuum Hose, 20 feet

  • The 92014 is designed to add 20 feet of highly flexible hose length to the hose on your canister or upright.
  • The hose has a 1 ¼” inner diameter and is 20 feet long. The hose will transfer the power of your vacuum without losing power due to its smooth inner diameter..
  • The 92014 is equipped with a unique compression adaptor that will grab on to the curved end on your can¬ister or upright vacuum hose and add the necessary hose length to clean a complete flight of stairs with the vacuum resting safely on the ground. If you own a Hoover vacuum with the unique pin system simply take the compression fitting off and thread on the Hoover adaptor..
  • The 92014 hose comes with two different hose ends to match with your accessories. Typically North Ameri¬can brands used 1.25” accessories while many European brands were designed for use with 1.375” accesso¬ries. The 92014 comes with alternative swivel wand fittings that allow you to match to either or both size of accessories..
  • The flexibility to adaptor to your vacuum by simply adjusting the ends allows the extension hose to work with most popular brands of canisters and upright vacuums including Hoover, Eureka, Bissell, Miele, Royal, Oreck, Sharp, Riccar, Simplicity, Kirby, and Kenmore.
Check Stock

EVIL ENERGY 6AN 90 Degree Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

  • ...rong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed..
  • 6AN 90 degree swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose ..
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place..
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

EVIL ENERGY 6AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black 2PCS

  • The female AN6 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. Package: 2 PCS..
  • 6AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line, clutch hose, turbo line etc. Our swivel fitting is work with nylon braided fuel hose. They are not compatible with PTFE hose, E85, rubber hose..
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place..
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

AR Blue Clean PW909UH-R, 1/4'x 25' Replacement/Extension Super Soft, Pressure Washer Hose Kit, 2900 Max PSI, Black

  • Includes: 25-foot super soft hose, 100 series transfer adapter, 300 series transfer adapter, and a garden hose extension adapter.
  • 25 Foot Super Soft Hose: This hose is built for performance, it can withstand up to 2,900 psi, 1.7 gpm, and has a max temperature rating of 60℃/140℉. Both ends of this hose have M22 x 15mm threading..
  • 100 Series Transfer Adapter: Use your 100 series trigger gun by attaching this adapter to the M22 outlet of your super soft hose. Built with a 100 series male plug and an M22 x 15mm female thread..
  • 300 Series Transfer Adapter: Clean with your 300 series trigger gun by attaching this adapter to the M22 outlet of your super soft hose. Built with a 300 series male plug and an M22 x 15mm female thread..
  • Brass Garden Hose Adapter: Attach this extension adapter to the outlet of your pressure washer, and the inlet of your hose for a secure fasten. Both ends of this adapter have M22 x 15mm threading..
  • Compatible with Most M22 Capable Electric Pressure Washer..
  • Does Not Fit the Following Pressure Washers: AR118S, AR117, AR119, SLP1500, AR1500, AR390, BC390HSS.
Check Stock

SPARC Oxy Acetylene 1/4\ Grade T Welding Hose B Fittings + Strain Relief Set 1YR USA Warranty (50 Feet)

  • CONSTRUCTION ✔ 1/4" Rubber Grade T hose with Type B Fittings on both ends. A big upgrade in durability and wear resistance from typical Grade R hose..
  • NO MORE FRAYED ENDS ✔ Built-in strain relief to prevent hose end damage.
  • PRESSURE ✔ This hose has a 300 PSI working pressure, and an 800 PSI burst pressure.
  • GREAT FOR ✔ replacement hoses for your oxy acetylene kit!.
  • WE'VE GOT YOUR BACK ✔ Backed by our rock-solid 1 year warranty against manufacturing defects. We are based out of Denver, CO and offer customer service and support via phone, text, and e-mail..
Check Stock

YoleShy Portable Air Conditioner Hose 5.9 Inch Diameter AC Hose with Clockwise Thread 80 Inch Length Compatible with Delonghi and More

  • CLOCKWISE: Our ac hose thread is clockwise and has a diameter of 5.9 inches. Suitable for most portable air conditioners, such as Delonghi. Please measure and compare your portable air conditioner coupler before purchasing..
  • STRONG & DURABLE: The exhaust hose is made of thickened polypropylene with a built-in high-quality steel ring, which has better heat resistance, wear resistance, aging resistance and longer service life. It can withstand long-term hot air flow withou.
  • LONGER & 80 INCHES: Our ac hose has good telescopic function and flexibility. It can be stretched up to 80 inches, that is more convenient to use in large spaces. It is fully retracted to 14 inches for easy storage..
  • EASY TO INSTALL: Fully stretch the two ends of the exhaust hose, and slowly rotate clockwise to a state where it cannot rotate along the thread of the coupler. Inserting the coupler into the air conditioner, it can be firmly fixed and obtain high-qu.
  • INFINITE CONNECTION: The ends of the two exhaust hose can be tightly connected, and have good tightness and no leakage. You can assemble multiple exhaust hose into hose of any length according to actual needs. (Only 1 exhaust hose, no coupler).
Check Stock

YoleShy Portable Air Conditioner Exhaust Hose 5 Inches Portable AC Hose with Clockwise Thread 80 Inch Length Compatible with Delonghi and More

  • CLOCKWISE: Our ac hose thread is clockwise and has a diameter of 5 inches. Suitable for most portable air conditioners, such as Delonghi. Please....
  • STRONG & DURABLE: The exhaust hose is made of thickened polypropylene with a built-in high-quality steel ring, which has better heat resistance, wear....
  • LONGER & 80 INCHES: Our ac hose has good telescopic function and flexibility. It can be stretched up to 80 inches, which is more convenient to use in....
  • EASY TO INSTALL: Fully stretch the two ends of the exhaust hose, and slowly rotate clockwise to a state where it cannot rotate along the thread of the....
  • INFINITE CONNECTION: The ends of the two exhaust hose can be tightly connected, and have good tightness and no leakage. You can assemble multiple....
Check Stock

DEASURE 29060E Pool Hose for Above Ground Pools - 1.5" Diameter Connection Pool Pump Hose for Intexx Cole man Filter Pumps, Sand Filters & Saltwater Systems, 59" Long Accessory Hose, 1 Pack

  • 【Compatibility】The pool pump replacement hose for above ground pool is perfect for Intexx, Cole man filter pumps, sand filters and saltwater systems that use 1-1/2" hoses, and also designed for pumps with 1,500 GPH to 2,500 GPH max capacities. Part #29060E..
  • 【Application】This pool hose can be also used as backwash hose or drain hose for your sand filter system, which carries waste water away from the swimming pool, when either backwashing or draining it..
  • 【Premium Material】The pool filter pump hose made of durable and flexible polyethylene plastic features a good suction power, leak-proof and not easy to deform under the sun exposure, ensuring its long-lasting use..
  • 【Easy Installation】Our sand filter pump hose comes with screw-on nuts on both ends for quick and easy installation. Simply connect the accessory hose between the pool outlet and the filter pump and tighten it, no additional installation tools required..
  • 【Package Includes】1.5 x 59 inches pool pump hose x 1. (assembled with nut on both ends). Replace a new connector hose to upgrade your pool ....
Check Stock

4\ x 10' Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won’t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!.
  • ypically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy e....
Check Stock