Top Horizontal axis Generator Reviews

PIKASOLA 1000W 24V Permanent Magnet Wind Turbine Generator 3 Blades Economy Homes Windmill for Wind Solar Hybrid System 2.5m/s Start Wind Speed with Controller for Wind Solar System (24V)

  • 1. Principle: horizontal shaft wind turbine generator, refers to the horizontal installation of shaft, parallel to the ground. The wind drives the blades to generate kinetic energy, which in turn drives the engine to generate electricity. Core components: blade + generator (engine) + rotating body + wind tail.
  • 2. Wind blade: 37.4 inch in length, made of nylon carbon fiber. The longer the blades are, the more kinetic energy they generate and the more power they produce. Nylon material waterproof, corrosion resistant, lightweight, high efficiency..
  • 3. Generator: three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet. A fully integrated voltage regulator that automatically shuts down when the battery is fully charged. The fan is controlled by MPPT intelligent microprocessor, which can effectively adjust current and voltage.
  • 4. Rotating body: with yaw adjustment system, the wind direction position is automatically read and the rotor position is adjusted to capture the maximum wind energy. The tail fin is designed according to the aerodynamic principle, with low starting speed and low vibration..
  • 5.Remarks: our products are designed after repeated experimental testing, and the parameters....
Check Stock

BILT HARD 4500 Watt Inverter Generator, Gas Powered, RV Ready, Home Back Up

  • Enough Power: the gas generator powered by a reliable horizontal single cylinder 4 stroke OHV gas engine, 4500 peak watts and 3500 running watts make this unit capable of powering several home essentials during an outage or providing power on the go..
  • More Efficient: The efficient design of the BILT HARD gas powered generator gives you more power with lower fuel consumption. The 3.2-gallon fuel tank allows 14 hours of run time at 25% load, this powerful gas generator is ideal for emergencies, job sites, food trucks, and outdoor recreation.(30 Amp RV Outlet, just plug and play, easy to power your RV).
  • Outdoor Generator: BILT HARD 4500W RV generator is equipped with Integrated smooth-rolling casters and has heavy duty 1” steel full-frame roll-cage for protection and tie-down support. This gas powered generator is ideal for emergencies, job sites, food trucks, and outdoor recreation..
  • Generator Parameter: Gas powered – Recoil Start – 212cc 4-stroke OHV gas engine – 4500 peak watts and 3500 running watts – Four 120V 20A 3-prong outlets & One 120V 30A twist lock outlet & 12V 8.3A DC cigar lighter – Two USB outlets – Fuel indicator –Circuit protector – Oil alert system..
  • Warranty: Every item will be Oil Tested before packaging, so it may look....
Check Stock

BILT HARD 7000-Watt Inverter Generator, Gas Powered Outdoor Generators for Backup Home Use & RV Camping

  • Enough Power: the gas generator powered by a reliable horizontal single cylinder 4 stroke OHV gas engine, 7000 peak watts and 5700 running watts make this unit capable of powering several home essentials during an outage or providing power on the go..
  • Generator Parameter: Gas powered – Recoil Start – 292cc 4-stroke OHV gas engine – Two 120V 20A 3-prong outlets & One 120V/240V 30A twist lock outlet & 12V8.3A DC cigar lighter – Fuel indicator – Circuit protector – Oil alert system..
  • More Efficient: The efficient design of the BILT HARD gas powered generator gives you more power with lower fuel consumption. The 4.62-gallon fuel tank allows 10.5 hours of run time at 25% load, this powerful gas generator is ideal for emergencies, job sites, food trucks, and outdoor recreation.(30 Amp RV Outlet, just plug and play, easy to power your RV).
  • Outdoor Generator: BILT HARD 7000W RV generator is equipped with Integrated smooth-rolling casters and has heavy duty 1” steel full-frame roll-cage for protection and tie-down support. This gas powered generator is ideal for emergencies, job sites, food trucks, and outdoor recreation..
  • Warranty: Every item will be Oil Tested before packaging, so it may looks used or touch a little oily, but 100% new condition. T....
Check Stock

BILT HARD Portable Generator 4500 Watt, Gas Powered Outdoor Power Equipment for Home Backup RV Camping

  • Enough Power: the gas generator powered by a reliable horizontal single cylinder 4 stroke OHV gas engine, 4500 peak watts and 3500 running watts make this unit capable of powering several home essentials during an outage or providing power on the go..
  • More Efficient: The efficient design of the BILT HARD gas powered generator gives you more power with lower fuel consumption. The 3.2-gallon fuel tank allows 14 hours of run time at 25% load, this powerful gas generator is ideal for emergencies, job sites, food trucks, and outdoor recreation.(30 Amp RV Outlet, just plug and play, easy to power your RV).
  • Outdoor Generator: BILT HARD 4500W RV generator is equipped with Integrated smooth-rolling casters and has heavy duty 1” steel full-frame roll-cage for protection and tie-down support. This gas powered generator is ideal for emergencies, job sites, food trucks, and outdoor recreation..
  • Generator Parameter: Gas powered – Recoil Start – 212cc 4-stroke OHV gas engine – 4500 peak watts and 3500 running watts – Four 120V 20A 3-prong outlets & One 120V 30A twist lock outlet & 12V8.3A DC cigar lighter – Two USB outlets – Fuel indicator –Circuit protector – Oil alert system..
  • Warranty: Every item will be Oil Tested before packaging, so it may looks....
Check Stock

Generator Interlock Kit Compatible with Horizontal Main Cutler Hammer CH series ONLY 150 or 200 amp panels TAN Breaker ONLY 1 1/2 spacing between main and branch breaker

  • 【Compatible Models】Compatible with Horizontal Main Cutler Hammer CH series ONLY 150 or 200 amp panels..
  • 【Interval Space Required】1 1/2 inch spacing between main and branch breaker.
  • 【Safety Generator Interlock kit】This kit avoids the inconveniences that an unexpected power outage can cause. It is used to direct generator power....
  • 【Package Contents】Our Generator Interlock kit include 1 × Interlock plate, 3 × Shoulder Screws, 3 × Hex Nuts, 1 × Generator Start-Up Procedure....
  • 【Buy Risk Free】All Our interlock Kits are backed by Lifetime warranty.Simply email us back if our product ever fails you and we'll mail you a new....
Check Stock

GenInterlock EAT-PN200 Cutler Hammer BR SERIES Panels Generator Horizontal Electrical Interlock Kit, Portable Power Use During Outage, 150 and 200 Amp

  • SAFE & RELIABLE: Generator interlock kit for the Cutler-Hammer generator, so you can safely back feed your home's electrical needs to a portable generator.
  • PACKAGE CONTENTS: Includes interlock, appropriately sized drill bit, safety labels, and breaker retainer.
  • COMPATIBLE: Cutler Hammer BR Series, BR series with plug-in neutral, and CH-series with plug in neutral 150 and 200 amp.
  • MAIN BREAKER POSITION: Single handle horizontal throw left (on) to right (off) 1.25-inch to 1.5-inch spacing between main breaker and branch breakers.
Check Stock

DOBO Wall Mount Bracket for TV Stand, Size from 20 inch to 55 inch

  • Suitable for 20 inch to 55 inch LCD TVs / monitors.
  • Allows multiple positions on the horizontal axis.
Check Stock

FOTYRIG Camera Level Hot Shoe Level 3 Axis Bubble Spirit Level Standard Shoe Mount Compatible with Nikon, Olympus, Pentax Digital and Film Cameras

  • COMPATIBILITIES- Three axis spirit bubble level for Canon, Pentax, Olympus, etc. SLR/DSLR cameras (Fits most SLR/DSLR flash mounts/hot shoes (Minolta & Sony & NikonD5200, D500, D5100 ,D90, D7200, D3300,D300, D3200, D7100, D600, D7000 excluded!).
  • 3 axis spirit bubble level- ideal for Landscapes and architectural photography, the spirit level allows positioning of horizontal and vertical axis simultaneously..
  • Easy to use-the spirit level mounts effortlessly right into camera's hot shoe, and it can be easily placed on a flat portion of the camera, which corresponds to the Lens axis..
  • Size: 0.93"X0.93"X1.1" Net weight: 0.56oz.
  • Made of crystal clear acrylic, being light, in a small size, high quality and novelty design..
Check Stock

Anwenk Hot Shoe Level Camera Bubble Level Hot Shoe Spirit Level Hot Shoe Cover (Includes 3 Axis Bubble Level, 2 Axis Bubble Level and 1 Axis Hot Shoe Cover) Combo Pack

  • Combo Pack- Package includes 1X Three Axis Hot Shoe Level.
  • 2X Hot Shoe Cover. Easily serve your demands. With these combo pack hot shoe level and hot shoe cover, you can take a level photo and dont have to straighten your photos in Photoshop..
  • 3 Axis & 2Axis Hot Shoe Bubble Level- The camera bubble level is idea for landscapes and architectural photography that allows positioning of horizontal and vertical axis simultaneously..
  • Hot Shoe Cover- Help keep the camera LEVEL and ,protect your hot shoe from getting bent or damaged..
  • Widely Compatible- The hoe shoe level and hot shoe cover are compatible with standard camera shoe for Canon Nikon Panasonic Fujifilm Olympus Pentax Sigma DSLR/SLR/EVIL Camera and more!.
  • Easy to Use- Simply slides into the camera hot shoe. Note: Please mind the hot shoe cover install direction..
Check Stock

Hilitchi 25 Pcs Complete Models Potentiometer Assortment Kit with 5K-100K Ohm Knurled Shaft 3 Terminals Linear Taper Rotary Potentiometer w Knob Nuts and Washers

  • 63 pcs Potentiometer Assortment, contains type 'A' logarithmic taper, 'B' linear taper and 'C' reverse logarithmic taper.
  • Includes 1K, 5K, 10K, 20K, 50K, 100K, 250K, 500K, 1M, B type comes 3 pcs each, A and C type each 2 pcs.
  • 3 pins, Power: 0.2W, Axis Diameter: 6,3mm (0.24 inch), Axis Length 16mm (0.6 inch), Axis without Thread 8mm (0.3 inch), horizontal terminals, knurled split shafts.
  • Nuts and Washers are included, 10-15 black knobs come as a bonus.
  • Each type comes accordingly sorted in a labeled recyclable PP plastic box.
Check Stock

top-tool DIY Vertical Axis Wind Turbine Model Wind Power Generator Three-Phase Permanent Magnet Generator Windmill Toy Night Light Making

  • It adopts three-phase permanent magnet synchronous generator, no carbon brush, and sends out three-phase ALTERNATING current, the bottom outgoing line is three-wire, and the LED can be lit by gently pushing the wind blade.
  • The bottom aluminum alloy bracket with screw holes is convenient for installation and fixation.
  • The blade beam adopts hardware stamping to ensure the strength.
  • The blade adopts PVC popular design, high conversion efficiency, corrosion resistance, uv resistance, generator shaft fixed with flange, to ensure accuracy and level, the rest of the parts using 3D printing manufacturing, really do the breeze start.
  • The height of the whole machine is 420mm, the distance from the edge of the fan blade to the axis is 105mm, the rotating diameter is 220mm, and the length of the blade is 250mm.
Check Stock

Artcast

  • ...monopod and other devices with 1/4 inch or 3/8 inch screw, or standard clamp, it is flexible and stable.
  • QR plate with standard 1/4inch screw and anti-slip rubber pad, it is easy to install your camera and keep it safe (Max Load 22 Pounds).
  • VERTICAL 360 DEGREE ROTATION: Composed of 3 independently adjustable boards (horizontal board, vertical board, camera loading board). The built-in stainless steel teeth disc locking design on the vertical board can be adjusted vertically 360 degrees.
  • HORIZONTAL 360 DEGREE ROTATION: Ball head on the horizontal supports 360 degree panning movement with calibrated precision for capturing panoramic overlapping images in horizontal direction. 5 different degree stop increments: 15°/ 30°/ 45°/ 60°/ 90°, stops around n24/ n12/ n8 / n6/ n4. It does not need to look down at the scale when shooting.
  • PLEASE NOTE: Please adjust the position of your camera lens before shooting: The lens node (lens optical center) must be adjusted to coincide with the axis centre of the vertical board and the horizontal board.
  • So the camera’s shooting node can be around a fixed point in 3D space and then the image captured by the camera can be pieced together using a software. Please refer to the picture for the adjustment method.
Check Stock

FLYCAM Comfort Stabilizing Arm & Vest for Flycam 5000/ 3000/DSLR Nano Handheld Camera Video Steadycam Stabilizer up to 5kg

  • Aluminum constructed handheld stabilizer lets you capture stable & smooth gliding shots.
  • Micro balancing feature on camera platform helps to quickly & precisely maintain horizontal balance.
  • CNC machined 3-Axis gimbal with soft grip handle for rotational camera control with easy ‘on axis’ movement.
  • Tool-less Telescopic central post for vertical balance.
  • weight discs to maintain dynamic balance.
Check Stock