Top Honeywell Current Transformer Reviews

24Volt Doorbell Transformer, C - Wire Adapter Thermostat, Compatible with Nest,Honeywell,and Ecobee Smart Wifi Thermostat, Nest Hello Ring Video Doorbell

HOME USE: Plug the transformer into your standard 110V /120V outlets and converts to 24 volt AC current..
SUPPORTED DEVICES: The 24v power adapter can not only power for popular smart thermostats such as Nest, Honeywell, Ecobee, Hive, Emerson Sensi, but also can convert to 24 volt AC current for other devices that require 24v current for operation..
TECHNICAL SPECIFICATIONS: Our battery backup input voltage is 120 V AC, 60 Hz.
EASY INSTALLATION :To prevent no power output, you must ensure that the terminals are stripped and securely clamp the screw terminals into the thermostat to maintain good contact，2 pin non-polarity wires to ensure easy and error free installation for installers of all skill levels and knowledge bases，If your wiring is complicated, please ask a professional electrician for help..
EXTRA LONG CABLE: 7M (23ft) long cable enables you to install the cable along the wall and connect to the electrical outlet inside or outside..

Check Stock

24V Doorbell Power Supply Adapter, 16.4ft C Wire Adapter Video Doorbell Transformer with 50pcs Cable Clips, Certified Doorbell Adapter Compatible with Simplisafe, Nest Doorbell and Smart Thermostats

24 Volt C Wire Adapter: plug the doorbell power adapter into your standard 120V outlets and converts to 24volt, 300mA/AC current.
Widely Use: this 24 volt doorbell transformer is widely compatible with many doorbell (Simplisafe, Ring doorbell, Eufy) and smart thermostat (Nest, Ecobee, Honeywell, Sensi), etc.
Certification: the doorbell power supply has certification, the power connector c wire adopt stable and durable material, comes with short-circuit protection and waterproof design, enables you to charge your devices safely.
Easy to Install: just a few minutes to connect this 24v transformer to your doorbell/ thermostat.
you can charge it directly and don't worry about "Low batter" problem anymore.
Package Include: 1 x 16.4 feet/5 m c wire power adapter, 50 white LPJ088 cable clips, makes the installation easier.

Check Stock

16.5V 40VA Burglar Alarm Systems and Doorbell Transformer,16.5V Plug in Transformer Compatible with All Versions of Doorbell ，Most Security Panels

➡︎ Easily Replace your Old Transformer - Plug in Alarm System Transformer for your Security System.
➡SPECIFICATION: input voltage: 120 VAC, 60Hz.
Output voltage: 16.5V, 40VA SAFE AND STABLE auto-resetting (PTC) fused secondary, LED green power indicator.
➡ELIMINATATE DOORBELL UNDER POWER HASSEL:16.5V 40VA plug in transformer, replaces and upgrades underpowered transformer with this 16.5V AC transformer, offering plenty of power for your doorbells.
➡Compatible With: This transformer compatible for Honeywell Ademco, DSC, ETC Burglar Alarm Systems.
Also compatible with Video Doorbell, Video Doorbell 2, Video Doorbell Pro, Nest Skybell Doorbell.
➡ Easy to install:Output with screw terminals, simple wiring.

Check Stock

CENTAURUS SCT-013-000 Split Core Current Transformer Sensor Non-invasive SCT013000 AC Current Split Core Transformer Sensor SCT-013-000 100A/50mA

【OPTIMAL PERFORMANCE】CENTAURUS premium upgrade SCT-013-000 Current Transformer Sensor is used for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
【HIGH QUALITY】CENTAURUS premium SCT-013-000 AC Current Transformer Sensor is made of high quality Ferrite material which can use for a long time.This split core current transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi..
【MAIN SPECIFICATION】Opening size: 13mm×13mm, fully compatible with most similar products.
The lead length is 1.5 meters, the standard Φ3.5 three-core plug output..
【OPTIMAL RELIABILITY】CENTAURUS SCT-013-000 AC Current Transformer Sensor has two forms of output current, voltage (voltage output built-in the sampling resistor).Non-linearity ±3% (10%～120% rated input current)..
【PACKAGE & SERVICE】Package Include: 1Pcs x SCT-013-000 Split Core Current Transformer Sensor .Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..

Check Stock

DUNSI SCT-013-000 Split Core Current Transformer Sensor Non-invasive SCT013000 AC Current Split Core Transformer Sensor SCT-013-000 100A/50mA

【HIGH QUALITY】DUNSI premium SCT-013-000 AC Current Transformer Sensor is made of high quality Ferrite material which can use for a long time.This split core current transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi..
【MAIN SPECIFICATION】Opening size: 13mm×13mm, fully compatible with most similar products.
The lead length is 1.5 meters, the standard Φ3.5 three-core plug output..
【OPTIMAL PERFORMANCE】DUNSI premium upgrade SCT-013-000 Current Transformer Sensor is used for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
【OPTIMAL RELIABILITY】DUNSI SCT-013-000 AC Current Transformer Sensor has two forms of output current, voltage (voltage output built-in the sampling resistor).Non-linearity ±3% (10%～120% rated input current)..
【PACKAGE & SERVICE】Package Include: 1Pcs x SCT-013-000 Split Core Current Transformer Sensor .Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..

Check Stock

Supplying Demand Q101 Furnace Heat Sequencer 1SPST 24 Volt On 1-20 Off 40-110

Integral transformer provides low voltage power for control circuit.
For switching two line voltage loads having a common power source.

Check Stock

24Volt Power Adapter/Transformer,C-Wire Adapter Thermostat，Compatible with Honeywell,Ecobee,Nest and Sensi Smart WiFi Thermostat Pro(25Foot /7.6M Cable)

HOME USE: Plug the transformer into your standard 120V outlets and converts to 24volt AC current..
SUPPORTED DEVICES: The 24v power adapter can not only power for popular smart thermostats such as Nest, Honeywell, Ecobee, Hive, Emerson Sensi, but also can convert to 24 volt AC current for other devices that require 24v current for operation..
TECHNICAL SPECIFICATIONS: input voltage is 120 V AC, 60 Hz.
INSTALLATION :To prevent no power output, you must ensure that the terminals are stripped and securely clamp the screw terminals into the thermostat to maintain good contact，2pin non-polarity wires to ensure easy and error free installation for installers of all skill levels and knowledge bases,If your wiring is complicated, please ask a professional electrician for help..
EXTRA LONG CABLE: 7.6M (25ft) long cable enables you to install the cable along the wall and connect to the electrical outlet inside or outside.For Nest E connected this adapter to C and R pins (R also having the HVAC’s Red line connected),For Nest Learning Thermostat,3rd generation connected adapter to the Cand RC pins.

Check Stock

Transformateurs

4000 Watt Step Up/ Down Voltage Transformer- This step up transformer and step down transformer can be used for all electronics, household appliances....
Voltage Transformer - This power transformer can be used in 110 Volt countries and 220 Volt countries. It will convert from 110 Volts to 220 Volts &....
Fuse Protected Power Transformer - CE Certified. Full Range Fuse Protection, Full Range Over Current Protection. Fuse will cut off the current if the....
Built-in large-caliber heat dissipation, stable output, good heat dissipation performance, safety protection, and more stable operation. note: Make....
Best Service: Dual circuit breakers protective for each voltage that is safe operation. If you have any problem, please feel free to contact us, we....

Check Stock

DAOKI 5 pcs 5A Current Transformer ZMCT103C AC Sensor Single Phase Current Transformer Module Current Sensor AC Active Output Onboard Precision with Dupont Line for Arduino

【Features】：5A range single-phase AC mutual inductance module The inductance module is equipped with ZMCT103C series high-precision current transformers and high-precision sampling resistors to facilitate the collection of AC current within 5A.
【Convenience】：Sampling resistance of AC current transformer onload sampling resistance to facilitate the signal collection of AC current..
【Analog current output】：the module can measure the AC current within 5A, and corredsponding output is 5A/5mA.
【Small size】：Current transformer of AC current mutual module with precise miniature current transformer.
【Original】：Our electronic components are 100% original manufacturing, please rest assured to buy our products.

Check Stock

MEROM 24V 500mA 26ft C Wire Transformer Adapter for Thermostat and Doorbell, Compatible with Nest/Ecobee/Sensi/Honeywell Thermostat, Nest Hello Doorbell/Ring Doorbell Power Supply

... wall from your outlet to the doorbell and thermostat without the existing wiring. Super easy to install that can be able to set up in minutes..
CONVENIENT: With this C Wire Adapter, you could able to charge your doorbells and thermostats without any worry about interrupting, which makes it a wonderful ring doorbell transformer. You don’t need to take off the battery inside the doorbells and just connect this transformer, keep doorbells charging any time you want..
LONG CABLE: Our cable is 8M(315 inch) long and you do not worry about the distance between the socket and the Honeywell Smart Wifi Thermostat. This allows you to easily plug it into an electrical outlet inside or outside your house..
SAFE AND CONVENIENT: Our battery backup has gotten certificate. A quick fix to the problem of “Low batter” you can charge it directly(plug adapter into outlet and power up). that means you don’t need to remove your honeywell thermostat in order to charge up the battery.With an AC output of 24V/500mA, a perfect tool to meet your needs..

Check Stock

BENSN 120V to 24V Ring Doorbell Transformer and Thermostat, Power Supply Compatible with Nest, Ecobee, Sensi and Honeywell Thermostat, Nest Hello Doorbell and All Versions of Ring Doorbell

Specification: BENSN ring doorbell transformer output is 24V 40VA and input is 120 V/ AC, 60 hz..
Compatible with: 24v transformer for Nest Hello Doorbell, Sensi smart thermostats, Ecobee, Saswell, Nest, Sensi and Honeywell Thermostat, Ring Video Doorbell 2, Ring Video Doorbell Pro, Ring Video Doorbell, Nest Skybell Doorbell and other devices that require constant 24 volt power for operation. Please note: The above brand names are only used to illustrate compatibility.
Perfect replacement: 24VAC / 40VA doorbell transformer, used to power single or multiple doorbells and thermostats. The 24 volt transformer replaces and upgrades the underpowered transformer while providing sufficient power for single or multiple thermostats and doorbells..
Easy to install: The ring power adapter simply mount to the electrical box via a threaded connector or screw down.
Please Note: the brand names above are only for demonstrating compatibility..
Service: If you encounter product problems, please contact the store in time to replace the product.All transformer come back by a 30-day change period, 24 month maintenance period..

Check Stock

24VAC, 40 VA AC Transformer Plug in with PTC Fuse Compatible with Ring Nest Doorbell UL Listed

Eliminate doorbell/ thermostat underpower hassel: 24V 40VA plug in transformer, replaces and upgrades underpowered transformer with this 24V AC transformer, offering plenty of power for your thermostats and doorbells.
SPECIFICATION: Input is 120 V/ AC, 60 HZ.
Tip: The load voltage(when the doorbell is running) is 24V and the output of no-load voltage is about 27-28V, normal function and won’t affect any use.When testing the product, pay attention to use an AC voltmeter or a multimeter to test the output voltage value and use a voltage tester to measure the accurate voltage output data..
Safe and stable: auto-resetting (PTC) fused secondary, LED green power indicator, positive/ negative/ ground screw terminals.
UL certified and easy installation: electrical outlet mounting tab.
Warm Tip: Only equip with plug-in transformer, no extra wires included.
This 24v transformer is compatible with Ring video doorbell, Ring video doorbell 2, ring video doorbell pro, Nest Skybell doorbell, also compatible with Nest, Ecobee, Honeywell and Sensi smart thermostats, and other devices that require constant 24 volt power for operation.
Note: the brand above is only for demonstrating compatibility.

Check Stock

24VAC 50VA Wall Transformer with PTC Fuse Compatible with All Versions of Doorbell，Nest, Ecobee, Sensi and Honeywell Thermostat,Water Solftener,Screw Terminal Output

Doorbell/Thermostat power solution: 24V 50VA wall transformer, replaces and upgrades underpowered transformer with this 24V AC transformer, offering plenty of power for your water solftener ,thermostats and doorbells.
SPECIFICATION: input voltage: 120 VAC, 60Hz.
Output voltage: 24V, AC 50VA SAFE AND STABLE auto-resetting (PTC) fused secondary, LED green power indicator,With safety ground pin.
Compatible With: This wall transformer compatible for Honeywell, Nest, Ecobee, and Sensi smart thermostats.
Also compatible with Video Doorbell, Video Doorbell 2, Video Doorbell Pro, Nest Skybell Doorbell, andwater solftener, Smart Sprinkler Controller.
Easy to install:Output with screw terminals, You can freely cut the connecting cable and arrange the cable according to the length you need to make the installation simple and beautiful.

Check Stock