Top Hollow Encoder Reviews

Encoder Metal Gearmotor 12V DC High Speed 130RPM Gear Motor with Encoder for Arduino and 3D Printers

✔Product type: DC Gear motor with two-channel Hall effect encoder.
✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
✔Single Output 540 Pulses Per Revolution: Gear Reduction Ratio: 1/45, Each Loop Output Pulses: 12PPR 45*12=540PPR.
✔Wiring Diagram: Red - Motor power terminal (+).
✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..

Check Stock

Bemonoc Encoder Metal Gearmotor 12V DC Low Speed 60 RPM Gear Motor with Encoder for Arduino and 3D Printers

✔Product type: DC Gear motor with two-channel Hall effect encoder.
✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
✔Single Output 1176 Pulses Per Revolution: Gear Reduction Ratio: 1/98, Each Loop Output Pulses: 12PPR 98*12=1176PPR.
✔Wiring Diagram: Red - Motor power terminal (+).
✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..

Check Stock

CUI Inc AMT102-V AMT10X Series 3.6 to 5.5 V 2-8 mm Open Center Capacitive Encoder Switch Kit - 1 item(s)

[Specification]- Type: EC11 Encoder with Screw Thread.
[Rotary encoder]- By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer count, this rotation counts are not limited. With the buttons on the rotary encoder can be reset to its initial state, that starts counting from 0..
[Applications]- Rotary encoders are widely used in industrial controls, robotics, photographic lenses, computer input devices such as optomechanical mice and trackballs, controlled stress rheometers..
[Package Content]- 10pcs x Rotary Encoder Code Switch Digital Potentiometer.

Check Stock

SJ@JX Arcade USB Encoder Fight Stick Raspberry Pi Joystick Button PC MAME Retro Pie Zero Delay USB 5V Encoder Board

Zero Delay Arcade USB Encoder For Your Pc Game DIY.
Use this Encoder you can build your own Arcade Game Machine.
The size for the encoder board just 8.5 cm X 3.5 cm X 1 cm..
Support All windows systems! Such as Windows XP,Windows 7,Windows 10.

Check Stock

Sensitive Arcade Buttons DIY Kit Arcade Buttons Game Controller Kit for Fight Stick Mame

Use the accessories to build your own Arcade Game Machine..
Support all systems, such as XP, Win7, Win8, Win10, etc. Compatible Model: For MAME & For Fight Stick, etc..
Zero Delay Arcade USB Encoder with USB Cable & Wires. Perfect Kit for Arcade PC Game DIY Project..
Easy installation design, simply connect your arcade controls to the encoder board with the included wires, then plug the encoder into your computer....
Professional 8 way Joystick with terminal for playing 2/4/8 way Arcade Fighting Games. A compact encoder with size of 8.5cm x 3.5cm..

Check Stock

DAOKI 10PCS Rotary Encoder Module KY-040 Brick Sensor Switch Button Development Board with 10PCS 15×16.5mm Knob Cap, Dupont Cable for Arduino AVR PIC

✔Product type: DC Gear motor with two-channel Hall effect encoder.
✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
✔Single Output 240 Pulses Per Revolution: Gear Reduction Ratio: 1/20, Each Loop Output Pulses: 12PPR 20*12=240PPR.
✔Wiring Diagram: Red - Motor power terminal (+).
✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..

Check Stock

Sensitive Professional Arcade Buttons Diy Kit Plastic And Metal Colourful Arcade Diy Kit for Mame Fight Stick

Professional 8 way Joystick with terminal for playing 2/4/8 way Arcade Fighting Games. A compact encoder with size of 8.5cm x 3.5cm..
Easy installation design, simply connect your arcade controls to the encoder board with the included wires, then plug the encoder into your computer....
Zero Delay Arcade USB Encoder with USB Cable & Wires. Perfect Kit for Arcade PC Game DIY Project..
Use the accessories to build your own Arcade Game Machine..
Support all windows systems, such as XP, Win7, Win8, Win10, etc. Compatible Model: For MAME & For Fight Stick, etc..

Check Stock

Professional Arcade Buttons Diy Kit, Wear-Resistant Sensitive Arcade Diy Kit , Zero Delay Windows Systems for Fight Stick Mame

Professional 8 way Joystick with terminal for playing 2/4/8 way Arcade Fighting Games. A compact encoder with size of 8.5cm x 3.5cm..
Easy installation design, simply connect your arcade controls to the encoder board with the included wires, then plug the encoder into your computer USB Port. And then enjoy your arcade games with your PC..
Use the accessories to build your own Arcade Game Machine..
Zero Delay Arcade USB Encoder with USB Cable and Wires. Perfect Kit for Arcade PC Game DIY Project..
Support all windows systems, such as XP, Win7, Win8, Win10, etc. Compatible Model: For MAME and For Fight Stick, etc..

Check Stock

Hikig Zero Delay LED PC Encoder USB to Joystick for LED Arcade Buttons & Joysticks - DIY Your Own Arcade Game Console - MAME, Raspberry Pi Compatable

2-Player LED USB Encoder Set: This is a 2-Player LED Arcade USB Encoder Set. Power Your Standard LED Arcade Buttons Directly..
Compatable for Almost All Type Joysticks: The Wire harness compatable for no matter Standard American Style Joystick or Japan 5Pin Style Joysticks..
Voltage: 5V (The Encoder Board Output 5V Power for both joysticks and LED Arcade Buttons..
100% Zero Delay: Both Encoder Boards are 100% Zero Delay to Offering Better Game Experience..
Support Standard LED Arcade Buttons. The Set including 20 Pcs 3Pin Cables for the LED Buttons. Easy to install..

Check Stock

Avisiri 2 Player Arcade Joystick DIY Parts 2x USB Encoder + 2x Elliptical Joystick Hanlde + 18x American Style Arcade Buttons for PC MAME Raspberry Pi Windows Red & Blue

2-Player LED USB Encoder Set: This is a 2-Player LED Arcade USB Encoder Set. Power Your Standard LED Arcade Buttons Directly..
Compatable for Almost All Type Joysticks: The Wire harness compatable for no matter Standard American Style Joystick or Japan 5Pin Style Joysticks..
Voltage: 5V (The Encoder Board Output 5V Power for both joysticks and LED Arcade Buttons..
100% Zero Delay: Both Encoder Boards are 100% Zero Delay to Offering Better Game Experience..
Support Standard LED Arcade Buttons. The Set including 20 Pcs 3Pin Cables for the LED Buttons. Easy to install..

Check Stock

38mm Outer Diameter Solid Shaft 6mm Optical Rotary Encoder 2000 PPR 5V Line Driver

✔Specification: Outer Diameter Dimension: 21mm.
Operating Temperature Range:-40℃~120℃.
✔Feature:Two matched Hall switches on a substrate.
High sensitivitts a wide voltage range (2.5V~24V).
✔Wiring Diagram:Red - Motor power terminal(+).
✔Tips:Be sure to keep the wiring connection correct before Working.
Be sure to keep the motor stopped before change the CCW/CW direction.
✔Quality Guarantee: All quality problems, pls send us e-mail firstly, we will give you satisfactory solution, and we're concentrating on our constant improvement of product quality and customer service, pls trust our brand "BEMONOC" and give us the chance, thanks!.

Check Stock

Arcade Game Joystick Kits Compact Design 8 Way Joystick Arcade Game DIY Kit Parts Wide Application for MAME for PC Game for Fight Stick red

Professional 8‑way joystick with terminal for playing 2/4/8‑way arcade fighting games, compact encoder with of 8.5cm x 3.5cm/3.3x1.3in..
Easy to install design, just use the included wire to connect your arcade controller to the encoder board, and then plug the encoder into the USB port....
Zero delay arcade USB encoder with USB cable and wires, perfect kit for arcade PC game DIY projects..
The arcade game kits support for systems, such as for XP, for Win7, for Win8, for Win10, etc..
Use the accessories to build your own arcade game machine, install button by users, and compatible models are for MAME, for Fight Stick, etc..

Check Stock

WSDMAVIS 1 Pcs Rotary Encoder E6B2 CWZ6C E6B2-CWZ6C 1024P/R DC 5-24V for OMRON

Type: 2pcs 360 Degrees Rotary Encoder Module, Model: KY-040, Working Voltage: 5V, Pulse Count Per Circle: 20.
Purpose: The rotary encoder can count the quantity of output pulse in the positive and negative direction rotation. The rotation counting is unlimited..
An incremental encoder is a rotating sensor that converts rotation displacement into a series of digital pulse signals. These pulses are used to control angular displacement..
The reading system usually uses differential mode to compare two different waveforms, but the phase difference is 180 degrees, so as to improve the quality and stability of the output signal..
With the button on rotary encoder, it can be reset to the initial state, that starts counting from 0..

Check Stock