Top Holley 75dominator Carb Reviews

NEW NOS SNIPER WET NITROUS PLATE KIT,150-250 ADJUSTABLE HORSEPOWER,10 LB ORANGE BOTTLE,COMPATIBLE WITH 4 BARREL HOLLEY 4150 SQUARE FLANGE),4500 DOMINATOR,SPREAD BORE QUADRA JET & CARTER AFB

  • Brand New NOS Sniper Wet Nitrous Plate Kit, 150-250 Adjustable Horsepower, 10 lb Orange Bottle, Compatible with 4 Barrel Holley 4150 Square Bore & Carter AFB (Holley Part #07002NOS).
  • NOS have built on the very popular, budget friendly, Sniper nitrous kits for those who need a little more power from their engines. The new Sniper 250 kits step up the power potential to an additional 250 horsepower, in a low cost single nitrous plate kit, for the popular carburetors, Holley 4150 (Square Flange) Part #07002NOS, 4500 (Dominator) Part #07003NOS & Spread Bore (Quadra jet) Part #07007NOS..
  • These single stage wet kits have everything needed to add some extra power to your engine. Includes a 10 lb. Sniper orange nitrous bottle, 14 ft. -4AN feed line, stainless bar nitrous plate & the new, large body, Sniper Solenoids. Also included is all the hardware required as well as nitrous & fuel jetting for power levels of 150, 175, 200 & 250 HP..
  • Features: Budget Friendly | Easy to install | All installation hardware included | Up to 250 additional horsepower | Large Nitrous & Fuel Solenoids | Included jetting for 150, 175, 200 & 250 HP | 14' long -4 AN Hose Length.
  • NOTE: It is important to follow the install instructions & to insure the fuel system has the capacity to sup....
Check Stock

Hydraker Motor Engine Lifting Plate Bracket Carb Carburetor Hoist SBC BBC Fit for Chevy Ford New

  • Hole sizes include: 1/4”, 3/8”, 3/8” x 5/8”, 3/4” x 3/8” and 1 1/2” x 1 1/2”..
  • Motor Engine Lifting Plate Bracket Plate thickness is 3/16”..
  • Easy engine swaps,allows engine to be lifted with an engine hoist..
  • Fits carburetors: Standard Holley 4150/4160 4500 Dominator Rochester Quadrajet Carter Motorcraft Edelbrock Edelbrock Q-Jet Carter AFB..
Check Stock

Speedmaster 1-147-035 Fits Chevy SBC 350 HiRise Vortec Intake Manifold Machine Polished

  • Square bore carb bolt pattern for the Holley 4150/4160 style carburetor.
  • Unique removable water flow divider to eliminate the thermostat in racing applications.
Check Stock

Assault Racing Products PC2027 Small Block Chevy Dual Plane Vortec Polished Aluminum Intake 1500-6500 RPM SBC

  • Square bore carb bolt pattern for the Holley 4150/4160 style carburetor.
  • Open air gap under plenum for cooler fuel charge.
Check Stock

Assault Racing Products PC2028 Small Block Chevy Dual Plane Vortec Satin Aluminum Intake 1500-6500 RPM SBC

  • Square bore carb bolt pattern for the Holley 4150/4160 style carburetor.
  • Open air gap under plenum for cooler fuel charge.
Check Stock

Longacre® 52-32700 Standard Carb Throttle Linkage Kit, 23-1/4

  • Kit includes 2 all metal rod ends, aircraft aluminum tube, Holley carb bushing, 2 return springs, bolts and nuts.
  • You just bend to clear air cleaner, cut to length, thread one end (requires 1/4"-28 tap).
  • It easily forms to any car or use straight.
  • The 6061 T6 Heat treated aluminum alloy is tough to bend but stays to shape in use.
  • Throttle rod length is 23-1/4" and has a 1/4"-28 RH thread pitch.
Check Stock

Assault Racing Products PC2021 Small Block Chevy Dual Plane High Rise Satin Aluminum Intake 1500-6500 RPM SBC

  • Dual Plane High Rise RPM Range: 1500 - 5500.
  • Square bore carb bolt pattern for the Holley 4150/4160 style carburetor.
  • Does not have provision for exhaust heated choke.
Check Stock

Assault Racing Products PC4000 for Small Block Ford Dual Plane Polished Aluminum Intake 1500-6500 RPM SBF 260 289 302

  • Square bore carb bolt pattern for the Holley 4150/4160 style carburetor.
  • Bridged rear water crossover passage to equalize flow and help keep temperature lower.
Check Stock

Assault Racing Products PC2033 Small Block Chevy Single Plane High Rise Vortec Satin Aluminum Intake 3000-7500+ RPM SBC

  • Square bore carb bolt pattern for the Holley 4150/4160 style carburetor.
  • Unique removable water flow divider to eliminate the thermostat in racing applications.
Check Stock

JEGS Carburetor Cap | Fits Holley, Edelbrock, AFB, Carter, & Quadrajet Carbs | Fits 5-1/8 “ Diameter Neck | Yellow | One Per Package

  • HELPS KEEP dust and debris out of your carb.
  • FITS Holley, Edelbrock, AFB, Carter, & Quadrajet carburetors.
  • CONSTRUCTED FROM bright yellow, high-impact molded plastic.
Check Stock

Air Cleaner Box Replacement for 99-04 Tacoma Pickup Truck 6 cyl 1770007060

  • This all steel air cleaner is based off the 1951-1956 Olds & Caddy air cleaner.
  • It uses an over-the-counter 14" x 4" replacement element.
  • Notched at rear for HEI distributor clearance.
  • It's even notched out in the back to clear a GM HEI distributor & will fit 5-1/8" carb neck (most Holley, Quadrajet, Demon and Edelbrock carbs).
  • Includes all steel housing, steel top, paper filter element, carburetor stud, and unique rocket shaped wing nut..
Check Stock

Aluminum Stain SBC Small Block Chevy 350 400 Air Gap intake manifold Dual Plane Chevy Small Block 265-400 Idle-5500RPM, DM-3602

  • Square bore carb bolt pattern for the Holley 4150/4160 style carburetor.
  • Open air gap under plenum for cooler fuel charge.
Check Stock

Holley EFI 12.3" PRO Touchscreen Digital Dash,1.25" Depth,5.81" Height,13.44" Width,Compatible with Holley HP,Sniper EFI & Terminator X Systems

  • Brand New Holley EFI 12.3" Pro Touch Screen Digital Dash, Compatible with Holley HP, Sniper EFI & Terminator X systems (Holley Part #553-111).
  • Holley EFI Pro Dash measures 13.44" wide, 5.81" tall & 1.25" deep. The Pro Dash is completely customizable for use in a variety of motorsports applications. It features a 12.3" 1280x480 resolution low glare, high brightness & contrast, full color capacitive touch screen for easy viewing even in full sun, plug & play connection to all Holley EFI systems & a weather resistant aluminum housing featuring flexible mounting options. Holley EFI 12.3" Pro Dash includes everything needed for install!.
  • The Holley EFI 12.3" Pro Dash also features Input/Outputs for expanded functionality of your Holley EFI install. The 34pin connector has 13 multi-configurable inputs for most Holley EFI sensors like pressure & temp. These inputs are configurable, allowing you to utilize different sensor scaling calibrations, 2 dedicated speed inputs for RPM, Driveshaft speed, or any other Hall effect speed input..
Check Stock