Top Hole Saw 25 Reviews

HSS Hole Saw Kits, High Speed Steel Drill Bits Hole Saw Opener Cutting Tool for Metal, Copper, Stainless Steel, Iron Plate (thick less than 1/9\(3mm)) Big Size 9/15”(15mm) ~ 2-4/25”(55mm) Set of 8

  • Material: These metal hole saw arbors made of high speed steel, and carbide steel saw teeth, highly hardness, strong toughness, low abrasion, wear resistance, long using life.
  • Available application: These hole saw kits can be used for stainless steel sheet, iron plate, thin aluminum, copper, pipes, wood, plastic etc(less than 3mm). And it can compatible with pistol drill, bench drill, vertical electric drilling machine etc.
  • Set of 8 different size: 9/15”(15mm), 25/32”(20mm), 1-1/10”(28mm), 1-8/45”(30mm), 1-11/30”(35mm), 1-13/20”(42mm), 1-22/25”(48mm), 2-4/25”(55mm). Multi different size HSS hole saw set for your choose, it will meet most of your needs..
  • Attention: When you use the hole saw drill bit, you should fixed the plate first, and make the angle of drill and plate at 90 degree. Also, the rotating speed should be increased slowly, the bigger of saw, the slower of the speed, and add the fresh water to cool the saw when it working..
  • Warranty: We promise to provide satisfied service for all of client, if there is any quality issue, we can give you a new replacement or full refund..
Check Stock

JINGLING 50mm 2\ inch Diamond Drill Bit Hole Saw for Glass Tile Ceramic

  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
Check Stock

JINGLING 175mm 7' inch Diamond Hole Saw Coated Tile Drill Bits for Glass Stone

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

JINGLING 100mm 4\ inch Tile Diamond Hole Saw Drill Bits for Glass Stone Ceramic

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

Aracombie 4PCS 1-1/4 Inch to 2-1/8 Inch Hole Saw Kit for Wood, 1.2 Inch Cutting Depth Hole Cutter Drill Bit with Mandrel, Round Hole Saw Set for Cornhole Boards Plastic Drywall Soft Metal (Black)

  • Package Contains: 4 x Wood Hole Saw Kit, 4 Different Cut Size: 1-1/4 inch/32mm, 1-1/2 inch/38mm, 1-3/4 inch/44mm, 2-1/8 inch/54mm. The hole saw cutter set can be easily installed on a handheld or vertical drill, Colour: Black..
  • Wide Range of Application: Plastic hole saw has sharp teeth, which can quickly drill a smooth edge hole in wood, plastic, PVC, cornhole boards, drywall, fiberglass, thin metal and other materials. Round hole saw cannot be used to cut concrete..
  • Cost-Effective: The fiberglass hole saw cut to a depth of approximately 1 inch / 25.4mm. A set contains 4 pack circle hole saw cutter, which is very suitable for woodworking, decorators, DIY enthusiasts, and craftsmen to buy and use..
  • Material: Drywall hole saw kit is made of high quality carbon steel, which is wear-resistant and durable. This fiberboard hole saw surface is painted and the side chip hole is designed to further extend the service life..
  • After-Sales Guarantee: Aracombie has a 24-hour human customer service. If you have any questions before purchasing or are not 100% satisfied with the product, please fe....
Check Stock

HORUSDY Hole Saw Set, Hole Saw Kit with Saw Blades 6

  • Made of high-quality carbon steel with heat treatment and blackening treatment, which has the advantages of high performance, oil resistance, rust resistance, durability and long life..
  • Hole saw kit includes 13pcs saw blades, the maximum size is 6" (152mm), the minimum is 3/4" (19mm), with 25mm cutting depth, meet various demand..
  • High-density sharp sawtooth, cutting faster and cleaner. Ideal for cork, plastic board, gypsum board and thin PVC board. This product is not suitable for hard metal, hardwood and MDF..
  • Hole saw kit comes in a sturdy box for easy storage and organization. Easy to carry. Designated slots in the case keep every piece in place, Improve work efficiency.
  • Hole Saw Set Includes 13 x Hole Saw Blades, 2 x mandrels, 2 x drill bits, 1 x hex key, 1 x installation plate, 1 x Storage Box..
Check Stock

JINGLING 63mm 2-1/2\ inch Diamond Drill Bit Tile Hole Saw for Glass Ceramic Stone

  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
Check Stock

WoWSupM 6-3/8 ,4-3/8 inch Recessed Light Installation kit Carbide Grit Hole Saw Cutting Drywall, Ceilin Tile　for 6” ,4”Lights

  • 【Package】The Carbide grit hole saw Installation light kit includes:1pcs of 4-3/8”, 1pcs of 6-3/8" carbide drill bits(Black or Red), 1pcs of 0.43” hex shank arbor, 2pcs of Ø0.25”x 3.5" HSS pilot drill bits..
  • [Application] This Carbide grit installation light hole saw kit is For 4”, 6” recessed light, Cutting Drywall, Plaster, Ceiling ,Corn Hole Board, Acoustical Tile. Cutting depth: Up to 1” ..
  • [Advantage 1] The carbide grit teeth hardness over 80HRC.It is more sharp ,hard. It’s a longer life in abrasive material..
  • [Advantage 2] The specially back removes the plug easily. It’s faster than bi-metal hole saw 2 times..
  • [Advantage 3] The specially sharp teeth cuts more smooth,clean . It is more faster than tradition carbide grit hole saw up to 30%. It is more faster than tradition bi-metal hole saw up to 50%..
Check Stock

VCT 21PC Hole Saw Kit Drill Bit Set 3/4\ - 6\ Saw Blades Wood PVC

  • Made of high-quality carbon steel with heat treatment and blackening treatment, which has the advantages of high performance, oil resistance, rust resistance, durability and long life..
  • Hole saw kit includes 13pcs saw blades, the maximum size is 6" (152mm), the minimum is 3/4" (19mm), with 25mm cutting depth, meet various demand..
  • High-density sharp sawtooth, cutting faster and cleaner. Ideal for cork, plastic board, gypsum board and thin PVC board. This product is not suitable for hard metal, hardwood and MDF..
  • Hole saw kit comes in a sturdy box for easy storage and organization. Easy to carry. Designated slots in the case keep every piece in place, Improve work efficiency.
  • Hole Saw Set Includes 13 x Hole Saw Blades, 2 x mandrels, 3 x drill bits, 1 x hex key, 2 x installation plate, 1 x Storage Box..
Check Stock

PLG2SUPT Recessed Light Hole Saw Kit 6-3/8,5-3/8,4-3/8,3-1/8 Inch Carbide Grit for 6”,5”,4”,3” Light Cutting Drywall, Ceiling Tile

  • This recessed light Carbide grit hole saw cutter Install kit includes: 3-1/8”(79mm), 4-3/8”(111mm), 5-3/8”(137mm), 6-3/8"(162mm) hole saw bit, 1 of 0.43”(11mm) hex shank large arbor, 2 of 3.5" (89mm) pilot HSS drill bits.
  • The carbide grit edge hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • The hole saw teeth is specially designing. It’s more sharp and more fast than tradition one. 4 pack hole saws are good match. It’s for professional choice..
Check Stock

Recessed Light 6-3/8 Inch Carbide Hole Saw Cutter with Extra Gift for 6” Light Cutting Drywall, Ceiling Tile, PLG2SUPT

  • This recessed light Carbide grit hole saw cutter Install kit includes: 1 of 6-3/8" 162mm hole saw bit(Black or Red), 1 of 0.43”(11mm) hex shank arbor, 2 of 3.5"(89mm) pilot HSS drill bits. Extra 8 of 1” CrV Screwdriver bits,1 of Magnetic bit holder, 1 of 3M tape measure..
  • This recessed light carbide grit hole saw bit kit is your ideal choice For 6” recessed light with electric tool, cutting through abrasive materials, Wood, Drywall, Wood & Plaster, Corn Hole Board, Hardie Board, Acoustical Tile, Ceiling Tile . Max cutting depth: 1” (25mm)..
  • The carbide grit hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • Can not cut the wood with nail. Be Careful: Look for Hidden electrical circuits before your drilling..
Check Stock

Acekit 2 1/4 inch Hole Saw With 3/8 Arbor HSS Bi-Metal Hole Saw Blade And Variable Teeth Pitch For Wood,Plastic Board,Pipe,Plywood,And Soft Metal Sheet (57mm)

  • 【HIGH PERFORMANCE】the hole saw made of M42 high speed steel and bi-metal ,dual slots for quick remove the chipped material,heavy duty and durable with large and sharp variable teeth pitch for fast and precisely cutting.
  • 【DIMENSIONS】diameter of the hole saw about 57mm for 2 1/4 inch hole cutting, depth of the hole saw about 1 inch (25mm).
  • 【QUICK CHANGE ARBOR】size of the screw in arbor is 3/8 inch for quick change mandrel, fits both 3/8 and 1/2 inch drills.
  • 【BONUS】the hole saw came with a allen wrench for drill bits installation , so you need not to pay extra money for it, and 1 pack of extra drill bits for long term usage.
  • 【WIDE APPLICATION】With the hole saw, you can easily cut precise hole for wood/plywood/laminated/PVC board, plastic pipe, ceiling ,kitchen cabinet hole cutting, you can also use it to cut hole for soft metal sheet (kind remind: for metal sheet cutting constant cooling with water will be good for long-term usage and fast cutting).
Check Stock

Tungsten Carbide Alloy Hole Saw Cutter Kits for Metal, TcnoMreol 9pcs Hole Saw Bits Sets Hole Cutter Tool for Stainless Steel, Steel Plate, Copper, Aluminum Alloy Cast Iron 12~42 MM(24/51~1-13/20 in)

  • Material: Made of high quality TCT carbide alloy, strong and durable, high hardness, anti-rust. Also built tungsten steel center drill, precise positioning and very durable.
  • Lengthening-stem designed: These metal hole saw kits come with Lengthening-stem, total length can up to about 90mm(3-27/50”), make sure there is much longer working distance, it possible to punch holes in narrow corner..
  • High efficiency: Designed with center drill bits, precise positioning, hole saw made of precision ground, with sharp tough gears, wear-resistant, and chip removal easily and smoother cutting edges..
  • 9 of kits: Diameter, 12mm(24/51”), 15mm(11/20”), 18mm(7/10””), 20mm(19/24”), 22mm(6/7”), 25mm(49/50”), 30mm(1-9/50”), 35mm(1-19/50”), 42mm(1-13/20”) hole saw kits, and 9pcs spring and Allen wrench. You can choose the most suitable size to make a hole..
  • Widely using: These TCT hole saw sets can use on stainless steel plate(less than 3MM(3/25”), Copper, Aluminum Alloy Cast Iron(less than 10mm(13/33”)), etc. And these hole cutter kits can working with bench drill, magnetic drill, electric hand drill, etc..
Check Stock