Top Hole Pipe Flange Reviews

4 Pcs Flange Two Hole Pin - Stainless Steel- 1-1/8'' 1-5/8'' Diameter

  • 【Set 2 Hole Pins】1-1/8'' Diameter, work with Bolts Holes Recommended 3/8'' to 1.0''.
  • 【Set 2 Hole Pins】1-5/8'' Diameter, work with 1/2 '' to 1-1/2'' Bolt Holes Up to 3'' Thickness of Flange.
  • 【Easy installation】The 2 hole pins pipe fitting tools is ergonomically designed for lightweight construction and easy installation with removable threads to accommodate different lengths. By using this two hole flange alignment pin set, you can easily install and level the pipe.
  • 【Package Included】4Pcs/1set, 1-1/8'' two hole pins and 1-5/8'' 2 Hole Pins.(As the picture shows).
  • 【Note】Professional installation is highly recommended (No Instruction Included).For any needs please contact us and got an reply within 24 hours.
Check Stock

WELWIK 4PCS Chrome Plated Stainless Steel Tapered Flange Cover Deep Bath Flange Made to Match Bell Flange, 1/2 in

  • The keyhole flange cover is made of stainless steel, which is heat-resistant and resistant to a variety of chemicals..
  • When the pipe passes through the wall, it will leave an ugly surface.
  • Conical pipe cover can be decorated with pipe cover or cover the gap to keep the appearance clean..
  • The size of flange cover is about 17 x 32 x 56 mm / 0.66 x 1.25x 2.2 inches, which is suitable for 1 / 2 inch CTS nominal copper pipe (5 / 8 inch outer diameter).
  • The hole cover flange cover is compatible with all 1 / 2'' nominal water pipes, such as copper, PEX and CPVC..
  • Can be used in various residential and commercial applications, and can be installed with kitchen faucet, sink, toilet, dishwasher, refrigerator and other water supply devices..
Check Stock

Flange Wizard 42050-TL Large Threaded Two Hole Pins, 1/2" - 1-15/16"

  • 【Set 2 Hole Pins】1-1/8'' Diameter, work with Bolts Holes Recommended 3/8'' to 1.0''.
  • 【Set 2 Hole Pins】1-5/8'' Diameter, work with 1/2 '' to 1-1/2'' Bolt Holes Up to 3'' Thickness of Flange.
  • 【Easy installation】The 2 hole pins pipe fitting tools is ergonomically designed for lightweight construction and easy installation with removable threads to accommodate different lengths. By using this two hole flange alignment pin set, you can easily install and level the pipe.
  • 【Package Included】4Pcs/1set, 1-1/8'' two hole pins and 1-5/8'' 2 Hole Pins.(As the picture shows).
  • 【Note】Professional installation is highly recommended (No Instruction Included).For any needs please contact us and got an reply within 24 hours.
Check Stock

Flange Wizard 38240-T Threaded Pipe Flange Aligners, 1/2" - 1-7/16"

  • Features slotted pins with "friction fitting" knurled nuts for flanges to 30" - 150 lbs.
  • All models of the pipe aligner will two-hole (make 2 holes of the flange horizontally level with the ground) and vertically level the face of the flange in one step.
  • All models come with 360° vials that just "snap" in and out for easy replacement.
  • The aligner inserts easily into pipe, centers snugly against the inside pipe diameter and automatically aligns with the pipe Axis.
Check Stock

Exhaust Flange, 2inch Universal Flat Oval Split Exhaust Flange Connection Repair Kit Low Carbon Steel Exhaust Downpipe Flange Replacement Accessory

  • Function: This 2-inch flat elliptical exhaust flange provides an effective fixing solution for the exhaust system, removing the intercooler system and turbine parts, such as charging pipes, intake pipes, diesel engines, turbochargers Compressor and heavy-duty exhaust system, etc..
  • Practical Exhaust Flange Repair Kit: The diameter of the center hole of this product is about 2 inches, and the oval bolt hole is about 2 inches. It has the characteristics of fine workmanship, high precision, high sensitivity, practicality and reliability..
  • Great Quality Low Carbon Steel Material: Our exhaust flange is made of high-quality low-carbon steel, which can ensure high hardness, rust resistance, effectively provide services while ensuring long-term use, and has good practicability..
  • High Precision: Our exhaust flanges are produced in strict accordance with the process, and each part is precision processed to achieve precise tolerances to achieve trouble-free performance. Old or damaged adapters can be replaced directly. Please rest assured to buy..
  • Easy Installation: This exhaust flange can be used without welding or cutting the exhaust pipe, just connect it to the flared pipe, and then bolt it to the existing flange you need to connect That's it, the installation st....
Check Stock

Remflex (8053) OBX Exhaust Header Connector Gasket, (Set of 2)

  • 1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
  • Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten the flange bolts.
  • Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 Inch.
Check Stock

1/2 Inches Escutcheon Flange Plate Pipe Cover for 5/8 Inches OD Copper, PEX, and PVC plumbing Pipe Stainless Steel Chrome Plated Escutcheon Pipe Wall Cover (12)

  • Size details: the size of flange cover is about 16 x 10 x 50 mm/0.5 x 0.4 x 1.97 inches, fitting for 1/2 inches nominal copper pipe (5/8 inches OD).
  • Reliable material: the escutcheon flange cover is made of 304 stainless steel, which has nice heat resistance and corrosion resistance to many corrosive agents, and can be applied for a long time.
  • Easy installation: the flange plate cover can be easily cut with a utility knife and installed around the pipe to increase the decoration of the pipe.
  • Decorative: when the pipe passes through the wall, it will leave an unsightly surface.
  • The plate pipe cover can be decorated with a tube cover, and it can also cover up the spaces to maintain a clean appearance.
  • Wide application: the escutcheon plate can be applied in various occasions, such as, home, office, shopping mall and so on, which also can be installed with water supply devices, like kitchen faucets, sinks, toilets, dishwashers, refrigerators and so on.
Check Stock

Polypropylene Pipe Fitting, Cross, Schedule 80, 1/2\ NPT Female for CR050

  • Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable black iron fittings are 100% tested and protected right at the factory. Home TZH Floor Flange of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Our pipe fittings come in 10 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. Floor flange pipe fittings are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality..
  • Without DIY Difficulty: Home TZH Industrial pipe flange comes with three standard holes allowing you to secure your flange to floors or walls. The floor flange is suitable for all kinds of surface application. Put this up in minutes. You can install the pipe fittings with easy to follow directions. Fix a wooden board with floor flange, than fix the whole bracket to the wall with screws and screw holder..
  • Your Personal DIY Style: The simple and indu....
Check Stock

3/4\ Floor Flange, Home TZH Malleable iron Pipe Fittings for Industrial vintage style, Flanges with Threaded Hole for DIY Project /Furniture/ Shelving Decoration (10 Pack)

  • Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable black iron fittings are 100% tested and protected right at the factory. Home TZH Floor Flange of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Our pipe fittings come in 10 PACKs for vintage furniture, DIY project and shelf hanging decoration applications in your home. Floor flange pipe fittings are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality..
  • Without DIY Difficulty: Home TZH Industrial pipe flange comes with three standard holes allowing you to secure your flange to floors or walls. The floor flange is suitable for all kinds of surface application. Put this up in minutes. You can install the pipe fittings with easy to follow directions. Fix a wooden board with floor flange, than fix the whole bracket to the wall with screws and screw holder..
  • Your Personal DIY Style: The simple and indu....
Check Stock

Antirust Black Painted Floor Flange, Home TZH Malleable iron Pipe Fittings for Industrial vintage style, Flanges with Threaded Hole for DIY Project/Furniture/Shelving Decoration (10, 1/2\)

  • Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable black iron fittings are 100% tested and protected right at the factory. Home TZH Floor Flange of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Our pipe fittings come in 10 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. Floor flange pipe fittings are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality..
  • Without DIY Difficulty: Home TZH Industrial pipe flange comes with three standard holes allowing you to secure your flange to floors or walls. The floor flange is suitable for all kinds of surface application. Put this up in minutes. You can install the pipe fittings with easy to follow directions. Fix a wooden board with floor flange, than fix the whole bracket to the wall with screws and screw holder..
  • Your Personal DIY Style: The simple and indu....
Check Stock

acylph Exhaust Oval Flange QuickFix Repair Pipe Kit w/Gasket & Hardware Universal 2.25" ID 2 Bolts

  • Designed to replace both sides of the flange connection.
  • This exhaust flange for high quality and accurate assembly for all your custom exhaust needs..
  • Application: Universal fit application for mostly any car..
Check Stock

Replacement Escutcheon Cover Plate, 4 Inch Universal Shower Arm Flange Escutcheon Replacement Cover Plate, Chrome

  • Excellent Design: Do you have a larger hole where your shower arm is located? Do you want to cover up this ugly hole? If so, Ancable 3.5" large diameter flange is designed for this and is perfect for covering gaps, holes and damage in walls. Ideal for G1/2" standard shower pipes..
  • Top Material: Shower arm flange escutcheon plate is made of high quality stainless steel, not easy to rust and durable. A durable rubber spacer in the center guarantees a perfect fit, allowing you to use it comfortably for long periods of time..
  • Easy to Install: Just remove the shower head and slide the new flange onto the wall, the additional attached small gasket on it made it fit snuggly against the pipe and keep water out. No tools required, installation takes just a few minutes..
  • Perfect Accessory: With this shower arm flange, save yourself time and money when remodeling your shower without having to go to the big store to find the right size. The chrome finish looks beautiful and pairs beautifully with other chrome accessories to match the modern style of your bathroom..
Check Stock

JACKEL 1/2 HP Pre-Plumbed Sump Pump System (Model: JPACK22S-250V)

  • 1/2 HP Sump Pump w Stainless Steel Housing, Cast Iron Volute, SJE-Rhombus Vertical Switch, Piggyback Plug.
  • Polyethylene Structural Foam Sump Basin ( 18 x 24 in. / 22 Gal. Capacity ).
  • Polyethylene Structural Foam Sump Basin Cover ( 1.5 in. Threaded Discharge Flange, 2 in. Threaded Vent Flange, 2-Hole Cord Grommet, Clear View Removable Inspection Plate and DrainTrap ).
  • 1.5 in. / 1.25 in. Check Valve and 4 in. Inlet Hub.
Check Stock