Top Hitch Lock Bolt Reviews

RETRUE Hitch Tightener, Hitch Stabilizer Heavy Duty Anti-Rattle Clamp for 1.25" and 2" Hitches, Reduce Movement from Hitch Tray Cargo Carrier Bike Rack Trailer Ball Mount, Rust Free

Premium Quality. RETRUE hitch tightener equiped with heavy duty φ0.4" U-bolt and 0.28" thick black powder coated plate anti-rattle stabilizer, can undertake all weather condition, rust free..
Practical and Functional. Reduce rattle and movement for hitch tray, cargo carrier, bike rack, trailer ball mount with brands curt,highland, goplus, pro series, rola, yakima, thule, etc. Can help to decrease noise and give you a quiet world when towing..
Utility Use. This tow clamp is perfect for locking 1.25" and 2" hitches, compatible with most hitches classes I, II, III, and IV (1, 2, 3 and 4). Suitable for trailer truck SUV sedan RV camper van and minivan..
Hitch Tightener Installation. After insert the tube, lock them directly by U-bolt and plate, put on original spring washers, flat washers and fasten by nuts, then done. If the hitch is low, and there is a risk for U-Bolt to scrap ground, lock the tightener from the bottom..
From RETRUE your reliable partner, model HT001. If you encounter any problems, please feel free to contact us through the "Ask a Question&q....

Check Stock

CLAMBER Hitch Step for Pickup Truck & Trailer with 2 Inch Hitch Receiver, E-Coat & Black Texture Powder Coat Surface Anti-Rust, Anti-Slip & Water-Proof, with U-Bolt Stabilizer, Hitch Lock & Reflector

Notice - CLAMBER Pickup Truck Hitch Step fits 2 inch towing hitch receiver. This extra step will make it easier entry/exit truck bed and effectively protect your car paint, rear bumper and truck body from minor collision or rear-end collision..
Material - Enhanced matel load bearing beam with down flanging design build a high-strength structure and maximize the weight capacity to 450lbs. E-coat & texture powder coat make it skid-resistant, rust-resistant, water-proof & weather-proof..
Design - DIY color: Removable and paintable red sheet, keep it, remove it or DIY your own color. Back reflector make your vehicle easier to be noticed. 8" insert part with 3 optional pin holes for different receivers. U-Bolt will steady the step against wobble..
Easy Un/Installation - Insert the hitch step, tighten the hitch lock and U-bolt stabilizer. The process would take a few minutes but will complete by oneself. Anti-theft hitch lock presented. Remember to keep the key..
Guarantee & Service - CLAMBER provides 2 year warranty for any defects of manufacture .( In some cases, the hitch step will interfere with backup sensor).

Check Stock

CZC AUTO Hitch Tightener, Heavy Duty Anti-Rattle Stabilizer for 1.25\ and 2\ Hitches, Reduce Movement from Hitch Tray Cargo Carrier Bike Rack Trailer Ball Mount, Rust Free (1 Pack, Carbon Steel)

CZC AUTO hitch tightener equiped with heavy duty φ0.4" U-bolt and 0.28" thick black powder coated plate anti-rattle stabilizer, can undertake all weather condition, rust free..
Reduce rattle and movement for hitch tray, cargo carrier, bike rack, trailer ball mount with brands curt,highland, goplus, pro series, rola, yakima, thule, etc. Can help to decrease noise and give you a quiet world when towing..
This tow clamp is perfect for locking 1.25" and 2" hitches, compatible with most hitches classes I, II, III, and IV (1, 2, 3 and 4). Suitable for trailer truck SUV sedan RV camper van and minivan..
Easy to install, after insert the tube, lock them directly by U-bolt and plate, put on original spring washers, flat washers and fasten by nuts, then done. If the hitch is low, and there is a risk for U-Bolt to scrap ground, lock the tightener from the bottom..
New arrival with very good price for only 1 month. Do not miss this price in hesitation. Please feel free to contact us at first if there is any problem when you receive or use our products. We are always here to support you..

Check Stock

CZC AUTO Hitch Clamp Anti-Rattle Stabilizer Heavy Duty Cross Clamp 2 1/2 Inch for Hitches On Trailers of Trucks SUV Vans RV Hitch Tightener Clamp for Hitch Tray Cargo Carrier Bike Rack Ball Mount

Creative Design of CZC AUTO Trailer Hitch Tightener: φ0.5 inch U-bolt and cross bar to eliminate rattle and movement for bike racks, hitch tray,....
Firm & Solid Hitch Coupling Clamp for Long Term Service: Made of high strength steel, the tightener fits for all weather condition. Nickel plated....
This Cross Hitch Tightener Clamp is perfect for locking 2 1/2 inch hitches, compatible with most hitches classes II, III, and IV (2, 3 and 4). The....
The Tow Clamp is Easy to Install and Hard to Loose Naturally: Insert the tube, lock them directly by U-bolt and cross bar. Put on flat washers and....
CZC AUTO - A Reliable Brand In Trailer Hitch Clamp Industry: We offer 30-day money-back for any reason, 12-month warranty for quality-related issues.....

Check Stock

EDOSTORY Tray Hitch Mount Bike Rack,Foldable 2 Dark Black Bicycle Rack fit for Cars, Trucks, SUV and Sedan with 1.25\ and 2\ Hitch Receiver-Hitch Stabilizer

[EASY TO INSTALL]:Our bike rack only takes a few minutes to assemble.There is two version manual in the package,please follow "Tray Hitch Mount Bike Rack With Hitch Stabilizer Version Manual". This bike rack fit for 1.25'' and 2” hitches. Note: Not compatible with RVs, trailers, or any kind of Class B vehicles Optional hitch extender needed for cars with spare tires..
[Htich Stabilizer]:install correctly and it can stop rattling, wobbling, rocking and significantly reducing noise.Easy to install, after insert the tube, lock them directly by U-bolt and plate, put on original spring washers, flat washers and fasten by nuts, then done. If the hitch is low, and there is a risk for U-Bolt to scrap ground, lock the tightener from the bottom.Follow the picture to install it and also can be mounted from the bottom..
[GOOD LOADING CAPACITY]:Heavy duty all steel construction bike rack will easily transport up to 2 bicycles.max load to 120LB.Hooks and tire cradles adjust to fit most bikes frames with 20" to 30" wheel sizes.The tire cradle is only suitable for bikes whose tire width does not exceed 4 inches(10cm)..
[DURABLE CONSTRUCTION]:durable and long-lasting all steel construction with protective powder paint finish.
[CUSTOMER SATISFACTION]: All of our bicycle....

Check Stock

kemimoto Adjustable Trailer Hitch Ball Mount, Aluminum Trailer Hitch Ball Mount with 2\ Receiver/6\ Drop 2\ & 2-5/16\ Hitch Balls/Double Pin Key Locks for UTV ATV Trucks Cars

【Sturdy & Safety】-The adjustable trailer hitches is made of solid aircraft grade aluminum.Trailer hook is polished, the smooth surface will not corrode or peel off, and can be used in various harsh environments.Integrated ball heads design will never fall off, which considerably improves safety..
【Adjustable ball mount】-Tow Drop ball mount can be adjusted 6" drop and rise, allowing you to adjust the hook to the most ideal level, making dragging fast, simple and easy..
【Chrome Steel Dual Balls】-The trailer hitchs with a 2" and 2-5/16" trailer hook, can be switched at any time according to different situations, and can be used in various trailers..
【Simple installation and removal】-Hitch trailer ball mount included two key lock latches bolt can prevent theft. The surface of the bolt is embossed, which makes installation and disassembly more labor-saving and time-saving. The precise fit of the bolt and the ball seat ensures that it will not be loosened and provides you with a higher security guarantee during the towing process..
【Wide Compatibility & Satisfactory services】-This drop hitch covers all common towing needs for vehicles with 2"receivers. The matter silver design of the hitch makes your vehicle look more eye-catching. We back ....

Check Stock

Kuryakyn 7657 Motorcycle Accessory: Receiver Hitch with 1-7/8\ Diameter Trailer Hitch Ball for 2014-19 Harley-Davidson Touring Motorcycles, Black/Chrome

Ensure smooth sailing and eliminate any fear of the "trailer shimmy" with our sturdy forged and welded steel receiver hitch.
Unique dual receiver design means the ball mount assembly engages the hitch frame vertically on both sides for optimum structural support.
This Black and Chrome Receiver Hitch for Touring Models remains hidden when ball mount is not installed and is the most simplistic bolt-on installation using simple hand tools.
Includes (1) Left Side Strut Hardware Kit - CONTINUED: (1) Right Side Strut, (3) 5/16-24 Nylon Insert Locking Nut, (1) Left Side Drawbar, (2) 3/8-24 Nylon Insert Locking Nut, (1) Right Side Drawbar, (2) 1/4-20 X 0.5 Hex Head Cap Screw, (1) Hardware Kit, containing: (1) 5/16-24 X 1.5 Full Thread, Hex Head Cap Screw, (2) Black Spacer .36, (2) Pin, 5/16 X 1.5, (2) Black Spacer .71, (2) 5/16 Lock Washer, (4) 5/16-18X1.75 Black Button Head Cap Screw, (6) 5/16 Flat Washer, (4) 5/16 Black Flat Washer, (2) 3/8 Split Lock Washer, (4) 5/16 Black Split Lock Washer, (2) 3/8 Flat Washer, (2) 5/16-24 X 1.5 Hex Head Cap Screw, (1) 1-7/8” Hitch Ball, (2) 3/8-24 x 2.75 Hex Head Cap Screw, (1) 3/4 Split Lock Washer, (1) 3/4-16 Hex Nut.
suggested tools for smooth installation: Combination Wrench Set, Torx Wrench Set, Hex Wrench Set, Torq....

Check Stock

TOPSKY Trailer Hitch Trailer Ball Mount & pin,1-7/8,2,2-5/16-inch Hitch Ball TS2005

DEPENDABLE STRENGTH: Choose from a range of towing capacities, including 2,000 lbs., 6,000 lbs. or 10,000 lbs. depending on your needs. Simply pull out the draw bar and rotate. Setup for truck, pickup, tractor with 2 inch standard hitch receiver or drawbars..
CORROSION RESISTANCE: For long term use, this hitch ball bolt is protected by a durable black powder coating finish. These topcoats resist rain, dust, snow, road salt, and other corrosive substances..
EASY TO INSTALL: To install the trailer hanger ball mounted on your vehicle, simply insert the handle into your vehicle's 2-inch hitch receiver. The round handle makes the installation easy, and includes hitch pin and pre-torque trailer ball to allow your trailer to be coupled immediately..
PRODUCT DIMENSION: Triple ball mount with three hitch ball sizes, including 1-7/8”, 2” and 2-5/16”. 8” length hollow shank fits a 2” by 2” receiver opening..
VERSATILE CAPACITY: Use 5/8 Inch Hitch Pin Kit or Lock. This product includes the pin and clip..

Check Stock

GEN-Y GH-1224 4-Receiver 2" Shank 16K Lb. Trailer Torsion Drop Hitch w/ 5" Drop

DEPENDABLE STRENGTH: Choose from a range of towing capacities, including 2,000 lbs., 6,000 lbs. or 10,000 lbs. depending on your needs. Simply pull out the draw bar and rotate. Setup for truck, pickup, tractor with 2 inch standard hitch receiver or drawbars..
CORROSION RESISTANCE: For long term use, this hitch ball bolt is protected by a durable black powder coating finish. These topcoats resist rain, dust, snow, road salt, and other corrosive substances..
EASY TO INSTALL: To install the trailer hanger ball mounted on your vehicle, simply insert the handle into your vehicle's 2-inch hitch receiver. The round handle makes the installation easy, and includes hitch pin and pre-torque trailer ball to allow your trailer to be coupled immediately..
PRODUCT DIMENSION: Triple ball mount with three hitch ball sizes, including 1-7/8”, 2” and 2-5/16”. 8” length hollow shank fits a 2” by 2” receiver opening..
VERSATILE CAPACITY: Use 5/8 Inch Hitch Pin Kit or Lock. This product includes the pin and clip..

Check Stock

TOPTOW Trailer Hitch Extender Adapter with 6-inch Riser/Drop, 2" Receiver, 2-inch Solid Shank, 10000lbs Capacity, Anti-Rattle Bolt

★Please check the product dimension before purchase. Extender length: 7" or 9". The 2" shank has two pin holes. ★RECEIVER SIZE: This trailer hitch extension riser has 2 inch by 2 inch industry-standard receiver, fits for most 2-inch shank of ball mounts and hitch accessories. ★ Please tightening the anti-rattle bolt after inserting into the 2 inch shank into the receiver. Recommend to use anti-rattle hitch pin or hitch lock for bike racks or cargo carriers..
★HITCH RISER OR DROP HITCH: 6.25 inch drop or rise can be turned up or down to level the towing system..
★ADJUSTABLE LENGTH: 2 pin holes design makes this drop trailer hitch have 2 active length and avoid interfere with the vehicle bumper.
★SOLID RECEIVER SHANK: Gross Towing Weight: 10,000 lbs. Tongue Weight: 400 lbs. Heavy duty for towing trailer, boat, camper, bike rack, cargo carrier and other tow hitches.
★CORROSION RESISTANT: Made of strong steel with a durable black powder coat finish, super corrosion resistant.

Check Stock

Vehiclex Anti Rattle Hitch Tightener for 1.25\ and 2\ Hitch Receivers – 0.44\ U-Bolt Diameter – Protective Anti-Rust Coating

A TIGHT AND SILENT HITCHING. Stabilizes hitch mount, preventing its rattling and wobbling..
PROTECTIVE COATING. Rubber-coated U-bolt and powder-coated tightener plate reduce the risk of scratches, chipping, and corrosion in any weather..
FITS THE MOST COMMON HITCH SIZES. Tightens any brand hitches I, II, III, and IV classes for 1 1/4" and 2" receivers..
EASY INSTALLATION on bike racks and hitches for cars, crossovers, trailers, vans, SUVs, and trucks..
THE SET COMES WITH 0.44" U-bolt, 0.31" tightener plate, 2 lock and 2 flat washers and 2 nuts..

Check Stock

TOPSKY TS2012 Trailer Hitch Ball Mount with Hook, 2 Inch Receiver, Hollow Shank Tow Hitch, Hitch Pin & Clip, Chrome

DEPENDABLE STRENGTH: Choose from a range of towing capacities, including 2,000 lbs., 6,000 lbs. or 10,000 lbs, Hook capacities: 10000lbs. depending on your needs. Simply pull out the draw bar and rotate. Setup for truck, pickup, tractor with 2 inch standard hitch receiver or drawbars..
CORROSION RESISTANCE: For long term use, this hitch ball bolt is protected by a durable black and chrome powder coating finish. These topcoats resist rain, dust, snow, road salt, and other corrosive substances..
EASY TO INSTALL: To install the trailer hanger ball mounted on your vehicle, simply insert the handle into your vehicle's 2-inch hitch receiver. The round handle makes the installation easy, and includes hitch pin and pre-torque trailer ball to allow your trailer to be coupled immediately..
PRODUCT DIMENSION: Triple ball mount with three hitch ball sizes with hook, including 1-7/8”, 2” and 2-5/16”. 8” length hollow shank fits a 2” by 2” receiver opening..
VERSATILE CAPACITY: Use 5/8 Inch Hitch Pin Kit or Lock..

Check Stock

Anti Rattle Hitch Tightener Stabilizer No Sway for 2' and 1.25' Steel Heavy Duty Rust Free

[Compatibility] Hitch tightener can be used with 2" and 1.25" tow hitch receivers，including Curt, Rola, Yakima, Inno, Draw-Tite, Blue Ox, Hidden Hitch, Thule, Tulga, U-Haul and other brands. It is compatible with all hitch classes includes I, II, III, and IV (1, 2, 3 and 4), both 2” and 1.25” models, ideal for hitches on SUV’s, vans, trucks, RV’s, sedans and trailers..
[Material] Includes a heavy-duty U-bolt and thick powder coated plate that will last to all weather conditions and loads..
[Easy Installation] Convenient and easy to install! Simply slip the U-bolt over the receiver, slide the tightener plate into the bolt, and tighten into place. In just 3 easy steps and in less than 10 minutes..
[Safety] prevents from rattling, wobbling, rocking and hitch movement for cargo carriers, hitch racks, bike racks and trailer ball mount. Leading design of Tulga hitch tightener is the best anti rattle hitch tightener in the market..
[Warranty] Our heavy duty built hitch tightener is backed with 30 days money back guarantee and LIFETIME WARRANTY.

Check Stock