Top Hight Rib Lath Reviews

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

1000 8x1-5/8 Phillips Modified Truss - Black Oxide

Check Stock

Tabbed Lath Washer 1-1/4 Diameter Galvanized 1,000 Box

  • Used for the Attachment of Metal and Plastic Lath, Plaster Repair, Insulation Board, and Gypsum Sheathings.
  • 4 Keyholes for Bonding of Plaster and Basecoats.
  • 4 Tabs for Pre-Spotting Washer into Soft Material Such as Insulation Board.
  • Center Hole will Accommodate Screws to #12.
Check Stock

Studpop Magnetic Stud Finder

  • Outperforms expensive electronics, find studs in seconds, works on all types of construction.
  • Unlike other stud finders, its indicator moves and clicks when a metal fastener is found..
  • No false positives, no batteries, no calibration, no mistakes, locates stud edge and center.
  • Works on sheetrock, tile over sheetrock, sheetrock over sheetrock, plaster, wood lath, paneling.
  • Sheetrock ceilings, wood or metal studs, contains 1 inch diameter super magnet, made of strong ABS plastic.
Check Stock

StudPoP On the LEVEL magnetic stud finder

Check Stock

Bon Tool Repl Wood Handle For Lath Hatchet 13-148 (84-593)

  • Repl Wood Handle For Lath Hatchet 13-148.
  • Hickory wood replacement handle for Vaughan hatchets.
Check Stock

Vaughan & Bushnell 641-32 13-1/2' Hatchet Replacement Handle - Supreme Grade (64132)

  • For Drywall / Wallboard Hatchet WBS (210-02) and UDH (200-02).
Check Stock

Surebonder 55916 Heavy Duty 9/16-Inch Length Staples, Arrow T50 Type, 1250 Count

  • Fits Surebonder models: 5690, 5600, 5685, 5800, 9600A.
  • Use for insulation board, metal lath, roof covering, etc..
Check Stock

Studpop GRIP magnetic stud finder Amazon picks color

  • Outperforms expensive electronics, Don’t let the GRIP’s small size and low price fool you. The StudPoP GRIP is going to change the way you feel....
  • If you’re frustrated by your electronic stud finder…then get a GRIP!.
  • Amazon chooses color, Non-slip rubber housing, Guaranteed accuracy, Unbreakable.
  • Works on all types of construction, Sheetrock, Tile over sheetrock, Sheetrock over sheetrock.
  • Plaster, Wood lath, Wood or metal studs, Easy to handle, Fun to use.
Check Stock

The StudBuddy Plus Magnetic Stud Finder and Level

  • The world's simplest stud finder. Made in the USA.
  • Works with all drywall applications. Works with newer lath & plaster walls as well.
  • Finds wood and metal studs behind drywall by locating nails and screws in the studs.
  • No batteries required. Built-in plumb and horizontal levels, soft grip handle, felt pads for smooth glide and inch and centimeter rulers..
  • Hang shelves, cabinets, paintings, mirrors, televisions and more. The StudBuddy LLC supports Hire Heroes USA and National Breast Cancer Coalition.
Check Stock

CH Hanson 03040 Magnetic Stud Finder 5 Pack

  • The world's simplest stud finder. Works with all drywall construction. Made in the USA..
  • NOT INTENDED FOR USE ON LATH & PLASTER WALLS..
  • Drywall is hung to wood or metal studs using screws or nails. The StudBuddy utilizes super-strong neodymium magnets to detect those screw/nail heads....
  • There are no batteries or moving parts to worry about. The StudBuddy is always ready to work!.
  • Ergonomically designed to fit comfortably in your hand and constructed of plastic that won't mar or scratch your walls..
Check Stock

10000 #8 X 3/4 Phillips Modified Truss Head K-Lath Sharp Point Screw Zinc Plated Bulk Box 50 Lbs.

  • Widely used for wood-to-metal applications such as metal lath in stucco/other to 22-18 steel studs..
Check Stock