Top Higher Strength Reviews

T159348 Axle Bevel Gear Aftermarket for John Deere Backhoe Sub. No. 4461351022

  • 16 teeth for use with L149Y-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Gate Caster Wheel Spring Loaded 4 Inch Swivel Castor 440lbs Capacity with Universal Mount Plate,Fence Gate Wheel

  • Left hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for 1:1 gear ratio applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

RIKIMARU Fluoro Fishing Line, 100% Fluorocarbon Coated Fishing Line (Clear, 12LB/0.32mm/300Yds)

  • Quickly reach target water level:Rikimaru fluorocarbon coating uses a material that is denser than water and can quickly settle to the target water layer, reducing the impact of current and other factors on the fishing experience..
  • Advanced materials:Rikimaru fluorocarbon coating combines the best of both worlds with a polymer core and a high strength fluorocarbon coating, allowing you to enjoy fishing in all conditions..
  • Impact resistant:The polymer core provides the product with amazing strength and can provide you with enough support while you fight with fish..
  • Higher cost performance ratio:Compared with fluorocarbon thread, fluorocarbon coating has a higher cost performance ratio.High strength and wear resistance are the major advantages of fluorocarbon coating over monofilament wire. You can now obtain a perfect substitute with similar quality and performance of fluorocarbon wire at a lower price..
  • Low visibility:Rikimaru fluorocarbon coated integral material has a light refractive index similar to that of water, can provide sufficient concealment, which is difficult to see underwater..
Check Stock

303 Oil Filter-2 Pack Motorcycle Oil Filter - for YAMAHA/POLARIS/HONDA/KAWASAKI Fits Multiple Makes and Models.

  • Ultra-strength filter housing that can endure higher burst strength than conventional filters.
  • O/E replacement oil filters for most cars, trucks, SUV’s, motorcycles, & ATV’s.
  • Resin-impregnated filter media traps 99% of harmful contaminants.
  • Advanced high performance tri-fiber filtration media for optimum filtration, higher capacity, and improved oil flow,and is compatible with all oil types。.
  • If you are not satisfied with the Oil Filter , please feel free to contact us and we will give you a full refund in the first time..
Check Stock

SHOUCAN Titanium Sheet Plate Thickness 1-4mm Ta2 Metal Titanium Suitable for Aerospace Industrial, 100×100mm/200×100mm,100×100×1.5mm

  • ✈ High plasticity: Density titanium alloy generally about 4.5g / cm3. which is only 60% of steel. Mechanical strength, twice as big as aluminum, magnesium greater than five times.The strength of titanium alloy is higher than that of general stainless steel and aluminum alloy, and can reach twice that of stainless steel..
  • ✈ High heat intensity: Temperature of several hundred degrees higher than aluminum. The melting point of 1942K, higher than gold 1000K, higher than steel 500K.The melting point of pure titanium is 1678°C. After adding alloying elements titanium alloy, the melting point of the alloy generally decreases, and generally decreases with the increase of the alloying element addition..
  • ✈ Good corrosion resistance: Titanium work in a humid atmosphere and seawater, the corrosion resistance is far superior to stainless steel.
  • for pitting, etching, stress resistance particularly strong.
  • and other organic materials have excellent corrosion resistance..
  • ✈ Good low temperature performance titanium alloys at low temperatures and extremely low temperatures, can still maintain its mechanical properties. It maintains good ductility and toughness at low temperatures of -196-253°C, and avoids the cold brittleness of metals, which makes it an ideal....
Check Stock

Boston Gear HLK103Y Miter Gear, 1:1 Ratio, 20 Degree Pressure Angle, 0.750\ Bore, 10 Pitch, 20 Teeth, Steel

  • Straight miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Hardened teeth for 1:1 gear ratio applications where hardness and strength are needed to transmit torque and motion.
  • Bore has keyway and setscrew for use with keyed shaft.
Check Stock

Boston Gear LSA102YR Spiral Miter Gear, 35 Degree Spiral Angle, 1:1 Ratio, 0.625\ Bore, 12 Pitch, 18 Teeth, Steel

  • Right hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for 1:1 gear ratio applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

EXAUTOPONE Stainless Steel Bevel Gear Set AR44 Compatible with AR44 Heavy Duty RC Car Bevel Gear Set 30T/8T

  • 32 teeth for use with L149Y-P mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

1PC 90-Degree reversing Angle Gear Right Angle Gear Steering Small Bevel Gear Box Bevel Gear Speed Ratio 1:1 (A)

  • 16 teeth for use with PA4416Y-G mating bevel gear in 4:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

NEWTRY Electric Centrifuge Machine Desktop Lab Benchtop Centrifuges with Timer and Speed Control 4000rpm Capacity 20ml×6 800D 110V US Plug, 60HZ

  • ★[EFFICIENT MOTOR] The motor components have a high degree of tightness, the motors run stably, have zero error design, and are efficient and stable..
  • ★[100%PURE COPPER COIL] Pure copper wire is fixed on the stator by winding, and the magnetic field is fixed during the stroke. The higher the copper content, the stronger the magnetic force, the stronger the rotor power, the higher the rotation speed, and the greater the centrifugal force..
  • ★[RUNNING SMOOTHLY] The motor and the base plate are connected by a damping column. With integrated circuit, the motor rotor runs smoothly, which can avoid motor vibration and is firm and stable..
  • ★[HIGH STRENGTH PLASTIC, SIMPLE STRUCTURE] [High strength plastic, simple structure]: The machine shell is made of high-strength plastic. Its structure is quite simple and easy to operate..
  • ★[LOW NOISE,MUTE] A round centrifugal head with a top cover reduces noise..
Check Stock

Results RNA Total Body Detox | for Optimal Health - 2 oz Bottle

  • ACS 200 EXTRA STRENGTH | ACS 200 Extra Strength provides 200 parts per million of uniquely energized sliver molecules suspended in ultra-pure,....
  • ACZ NANO ZEOLITE EXTRA STRENGTH | Results RNA formulas can be taken in any combination without waiting and can be taken with food or without, at any....
  • All products are | Non-GMO Gluten free Dairy free Vegan.
  • DIRECTIONS FOR USE Standard Dose | Take 6 sprays by mouth, twice daily. Higher Dose: Take 12 sprays by mouth, twice daily. You may take other Results....
  • INGREDIENTS | ACS 200 Extra Strength Ultra-Pure Deionized Water, Advanced Cellular Silver (Elemental) 200 Parts Per Million. ACZ Nano Extra Strength....
Check Stock

CuberSpeed Gan 460 M stickerless 4x4 Speed Cube Gans 4X4X4 Magnetic stickerless Cube

  • GAN MAGNET CAPSULE. Revolutionary magnet Positioning ,tight and precise The GMC (GAN magnet capsule )technology,replacing handmade,pungently Glued....
  • See the Force, Speed with You . Replacing hidden magnets, the GMC shows you all 96 magnets-----gracefully.No longer missing or falling out..
  • How Symmetry Light up the Cube . GAN460M applying a novel GAN patent--------Total Symmetric Structure, now it's the same color inside and stickerless....
  • The total symmetric clips make GAN460 GD gorgeous and easy to use, also strength. Higher strength feet , unbreakable parts. Pieces、blocks are all....
  • Assembled with GANSCORE, GAN460 (E) has higher perpendicularity. The new 4x4 IPG( lron plastic GANSCORE) is build by merging iron and plastic and....
Check Stock

Natural Path Silver Wings Dietary Mineral Supplement, Colloidal Silver, 500 PPM, 4 fl. oz. / 120 ml

  • BEST SELLER: Natural Path Silver Wings Colloidal Silver 500 PPM is our best seller. 50 times stronger (more silver particles) than 10PPM silver solutions. Higher PPM strength offers convenience of less dosages per day. Properly prepared pharmaceutical grade colloidal silver is safe to use in higher PPM strengths and concentrations..
  • SMALL SILVER PARTICLES ARE MORE BIOAVAILABLE. Natural Path / Silver Wings Colloidal Silver average silver particles range from 0.6nm – 3nm. It is easily absorbed and readily available for your body’s immune support needs. Silver Wings Colloidal Silver is safe, more bioavailable and effective for immune support than competing brands..
  • WHAT IS PARTS PER MILLION (PPM)? PPM (STRENGTH) is the number of silver particles per serving yields greater concentration and increased immune support. Silver Wings offers products in 50,150,250, and 500PPM..
  • AMBER COLOR IS KEY: Silver Wings is made from naturally occurring elemental Silver, which has a color. It is not ionic or electrically processed. The higher PPM, the darker the amber color colloidal silver suspension (liquid) will appear..
  • GMP CERTIFIED & QUALIFIED 3RD PARTY INDEPENDENT LABORATORY VERIFICATION- Natural Path / Silver Wings manufacturing and distribution facility is UL cG....
Check Stock