Top High strength Threaded Rod Reviews

JWL 1 Cane Walking Stick Handle Shift Knob Ball Style Cast Aluminum with Threaded Rod Connector

  • Cast Polished Aluminum Ball Handle with threaded rod connector provided.
  • Very Strong Cast Aluminum material tapped to receive threaded rod.
  • 3/8" x 16 threaded rod 2" long connector to attach handle to cane shaft.
  • 2 1/4" high by 1 1/2" in diameter & 15/16" where base meets the shaft.
  • Base at connection point is about 15/16" to 1 " diameter.
Check Stock

L Shaped Shower Curtain Rod, Stainless Steel No Drill L Shaped Shower Curtain Rod (Adjustable Range 27.5\-35.4\& 27.5\-35.4\), Corner Shower Curtain Rod for Bathroom

  • Length Adjustment Curtain Rod – You can adjust the length to fit any shower area requirement. Confirm the length needed, and then rotate the rod to match the length. Once tightened the rod won’t come loose..
  • 2 Mounting Options – No drill mounting uses glue to attach the bracket to the wall if drilling would damage the wall. The glue has a strong bonding force so the bracket will stay attached. The other method is to drill and use screws and anchors to mount the brackets..
  • High Strength Curtain Rod – The 1 inch stainless steel rod uses threaded connections, which is much stronger than other rods. This construction also prevents the rod from coming loose..
  • Non-Droop Design – The design of the rod and brackets offset the fall caused by gravity even with heavy shower curtains over time. The rod will stay horizontal and will not sag..
  • Rod Surface Finish – The curtain rod is made of polished stainless steel providing a mirror like finish. The finish will not rust or flake off and will keep the bright finished..
Check Stock

The Hillman Group 4374 5/16-24 Hex Coupling Nut Fine Thread,Pack of 5

  • Commonly used in industrial applications.
  • Included variants run #10-32 to 3/4"-16 in fine thread size.
  • Zinc finish for improved corrosion resistance.
Check Stock

Jameson 7-36-23T Fiberglass Glow Rod Kit, 24'

  • Set of three 6' x 1/4" rods, and two 3' x 1/4" rods that assemble into 24' and are high in strength and flexibility so you can handle turns easily without breakage.
  • Durable steel threaded ferrules make it possible to customize rod length.
  • Included: one bullet nose with eyelet, and one hook.
  • Accessories use o-rings for secure attachment.
Check Stock

Threaded Rod, Carbon Steel, 1/2-20x1 ft

  • Price For: Each Basic Material: Steel Fastener Finish: Plain System of Measurement: Inch Material Grade: Low Carbon Rockwell Hardness: B85 to B97 Fastener Thread Direction: Right Hand Item: Threaded Rod Yield Strength (PSI): 45, 000 Thread Class: 1A Fastener Thread Type: UNF Dia./Thread Size: 1/2"-20 Tensile Strength: 60, 000 psi Overall Length: 1 ft..
  • Country of Origin (subject to change): United States.
Check Stock

Threaded Rod, Steel, 7/16-20x3 ft

  • Price For: Each Basic Material: Steel Fastener Thread Direction: Right Hand Item: Threaded Rod Meets/Exceeds: ASME B18.31.3 Tensile Strength: 115, 000 to 125, 000 Rockwell Hardness: C35 Overall Length: 3 ft. Temp. Range (F): Not Rated Fastener Thread Type: UNF Fastener Finish: Zinc Yellow Material Grade: B7 Dia./Thread Size: 7/16"-20 System of Measurement: Inch.
  • Yield Strength (PSI): 95, 000 Country of Origin (subject to change): Multiple.
Check Stock

10 oz. Dewalt AC100+ Gold Quik-Shot Acrylic Epoxy Adhesive (Case of 12)

  • ICC-ES ESR 2582 - Category 1, Cracked and Uncracked Concrete.
  • Bonding threaded rod and reinforcing bar into hardened concrete and masonry.
  • Can be installed in a wide range of base material temperatures.
  • Consistent performance in low and high strength concrete (2,500 to 8,500 psi).
Check Stock

TOPINCN Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing Thread Master Repair Kit M6 x 1.0 x 8.0mm 25pcs

  • Made of high‑strength, high‑accuracy diamond‑shaped cross‑section steel wire. Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves, which is a new type of female threaded fasteners.
  • Used to low‑strength engineering materials such as aluminum alloy, zinc alloy, alloy, copper, plastic, engineering plastics, etc., can significantly improve thread strength and wear resistance.
  • Form a high‑strength, wear‑resistant, high‑accuracy standard female thread when you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials.
  • Wire thread inserts can be used to convert between and inch thread holes, which is convenient and fast.
  • When a thread error occurs or a damaged female threaded hole is repaired, threaded insert can be used as a repair method. Repairing the threaded hole in a cost‑effective manner.
Check Stock

C.K T5410 10m Mighty Rod Cable Rod Set

  • Triple bonded steel connectors for extreme torsion and tensile strength - threaded, crimped and glued.
  • High sheen fibreglass composite rods minimise snagging and splintering.
  • Slimline connectors reduce snagging and provide accessibility through smaller holes.
  • 5 mm rods offer the optimal balance of rigidity and flexibility for the majority of cable routing requirements.
  • Set contents: 10 piece of 1 m rod, 1) cable hook, 1) Mini eye and ring, 1) 190 mm coiled steel flexi lead and 1) 5 mm adaptor.
Check Stock

NEIKO 10768A 12" Carbide Chop Saw Blade, 2 Pack, 80 Tooth with 1-Inch Arbor, Compatible with Miter, Table, Radial Arm, Cut-Off, Standard Circular Saws, for Home Building, Construction, Woodworking

  • 【IMPROVE EFFICIENCY】 This aluminum alloy miter rod is usually used for table saw woodworking work, effectively improving efficiency..
  • 【ALUMINUM ALLOY MATERIAL】 The miter rod is made of high-quality aluminum alloy material, with high strength and long service life..
  • 【STANDARD SIZE】 The miter rod has a universal threaded mounting hole, which is easy to use and fits in a standard miter groove..
  • 【STAINLESS STEEL PULLEY】 Our oblique street poles use adjustable stainless steel pulleys to easily achieve a perfect sliding effect..
  • 【SCOPE OF APPLICATION】 This is a miter slide bar, used to construct various jigs on the table saw, such as miter sleds, etc..
Check Stock

VIVOHOME 45mm Portable Spinning Dance Stripping Pole for Home Fitness Black

  • PREMIUM MATERIAL - Made of premium chrome steel material that is durable and resists rust and corrosion.
  • The seamless surface is extremely smooth so you will not get scratched or hurt when using it.
  • User-friendly design allows you to use it for daily workouts.
  • ADJUSTABLE HEIGHT - A threaded rod is built into the main pole.
  • Simply insert the fixing rod and rotate it into place.
  • The threaded rod allows you to extend or contract the pole to fit it into any space.
  • Also comes with 2 extension poles to extend the length from 88” to 108”.
  • 2 USING MODES - There are 2 different modes (static mode/ spinning mode) designed to meet your different needs.
  • Simply use a Hex key to tighten the pole and keep it from spinning.
  • Easy to choose the suitable style that works for you.
  • WIDE APPLICATIONS - A perfect assistant for pole dancing.
  • Suitable for dancers, athletes, and someone who is trying to get a workout.
  • Great for gyms, yoga rooms, bars, clubs, or your home.
Check Stock

26 Pack 8/32 Inch Threaded Rods with Hex Nuts M4 12 Inch 304 Stainless Steel Fully Rod Threaded, 13 Pcs M4 300mm Right Hand Threads, 13 Pcs Hex Nuts for Hangers, U-Bolts and Beaded Garden Stake Rods

  • 【THREADED RODS PARAMETERS】Thread Diameter M4: 2.8mm/0.11 ''.
  • 【MATERIAL】304 stainless steel material, corrosion resistance, high temperature resistance, rust resistance and good processing performance.
  • 【FULL THREAD & HEX NUT】For assembly and fastening, threaded rod is a fastener reinforced in threaded nut or threaded hole, right-hand threaded rod stud. Hexagonal nuts are an ideal replacement for industrial and construction fasteners, Simply screw on to a bolt of the same thread size, quick and easy..
  • 【APPLICABLE SCENARIOS】Perfect for auto parts, standoffs, bolts and more metal items that need to be fastened.
  • 13 Pcs full threaded rods, 13 Pcs full threaded hex nuts, 26 Pcs in total, perfect for garden stakes decorative beaded garden stakes etc for outdoor decoration..
  • 【PACKAGE LIST】13Pcs M4×300mm threaded rods, 13 Pcs M4 Stainless Steel Fully Threaded Hex Nuts, which can be cut, heated, drilled and used in multiple dimensions..
Check Stock

uxcell M6 x 250mm Fully Threaded Rod, 304 Stainless Steel, Right Hand Threads

  • Fully threaded rods are widely applied in many occasions..
  • Used for assembly fastening, screw into threaded nuts or tapped holes..
  • 304 stainless steel, provides great corrosion resistance and antirust ability for a long service life..
Check Stock