Top High speed Machining Tool Reviews

AUTOTOOLHOME 1/4 inch HSS 4 Flutes End Mills Milling Cutter End Drill Bit Straight Shank Pack of 2

HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
STRONG and DURABLE:The end mill bits are made from Ultra-fine tungsten steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..

Check Stock

BONYTOOL Dovetail Milling Cutter HRC55 Coated Tungsten Steel Carbide Slotting End Mills 75° 60° 45° Chamfering CNC 4 mm -60°

Material: Tungsten steel, high hardness and good toughness.
Rugged construction, durable with long service life.
Milling cutter end mills machining hardness: HRC up to 55 degree.
Applicable machine tools: CNC machining center, CNC machine tool, engraving machine, fine engraving machine, high speed machine, etc.
Applicable materials: stainless steel, die steel, ductile cast iron alloy steel, mixing steel, titanium alloy, etc..

Check Stock

Milling Face, High Temperature Resistance High Speed Good Impact Resistance Facing Cutter, New Coating Technology for Precision Machining Rough Machining

Machining Range: precision machining, rough machining, plane processing and step processing..
High speed: rotary and milling feed speeds are 3 times faster than normal milling cutters..
Made of cemented carbide, which has high hardness with good impact resistance..
New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time..

Check Stock

uxcell Spotting Drill Bits 5mm Dia 5mm Shank 60 Degree Solid Carbide AlTiSin Coated 2 Flutes Round Shank Drilling Cutter

Spotting Drill Bits: Cutting Edge Diameter: 5mm / 0.2".
Total Length : 50mm / 2.0". Large spiral flutes provide neat and smooth cuts. Spiral groove facilitates the export of metal chip..
Wide Applications: Widely used for drilling steel below HRC60, such as stainless steel, carbon steel, die steel, alloy steel. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability..
Carbide Tool: Made of fine-grained tungsten carbide, the drill bit has good toughness, high hardness (HRC92), wear resistance and heat resistance. With good cutting strength and drilling effect, carbide tool offers long tool life and faster cutting speeds than other substrates..
Easy to Use: Universal chamfered round shank, easier clamping, stable cutting process. Suitable for CNC machining centers, CNC machine tools, precision engraving machines and other equipment. The longer the length of the tool clamped by the chuck, the better..
Tips: If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance..

Check Stock

uxcell Chucking Reamer 1/4\

Specifications: Cutting dia.: 5.6mm / 0.22".
accuracy: D4. High-speed steel tool with cobalt is good for general purpose applications.
Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications.
Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock.
Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Reamer is with high hardness, toughness, wear resistance, long service life.
Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers.

Check Stock

10 pcs 4-Flute End Mill Bits, AFUNTA 0.08\ - 0.47\ HSS CNC Straight Shank Drill Bits Cutter Tool Set for Wood Aluminum Steel Titanium

APPLICATION: Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium..
HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials with high speed, reduce changing times and improve the production efficiency..
U-SHAPED GROOVE DESIGN, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
MATERIAL: high speed steel, high hardness, good wear resistance and durability..
10 DIFFERENT KINDS OF SIZE end mills to meet your need, 2mm/0.08in,3mm/0.12in, 4mm/0.16in, 5mm/0.2in, 6mm/0.24in,7mm/0.27in, 8mm/0.31in, 9mm/0.35in,10mm/0.39in, 12mm/0.47in.

Check Stock

60W Mini Rotating Lathe,12000RPM Metal Rotating Lathe,Mini Lathe Machine Lathe Machine Tools,for Wood Metal Glass Plastic Machining

?¡¾PRODUCT PARAMETER¡¿ ?Motor Speed: 12000rpm ? Input Voltage/Current/Power: 12V DC/5A/60W ?Axis X travel: 32mm.
Axis Z travel: 145mm ?Max Diameter of Machined Material: 100mm ? Machining Accuracy: 0.05mm..
?¡¾MAIN PARTS¡¿ Headstock, tailstock, long machine bed, big slider, small slider, motor blade, gear, connection block, belt cover etc. All of the parts are made of metal except belt cover..
?¡¾GOOD PERFORMANCE¡¿Maximum motor power is 60W by using more powerful motor.With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining..
?¡¾POWERFUL FUNCTIONS¡¿Motor case and headstock are jointed. Axis Z slider can spin 180¡ã.Center height is 75mm and distance between centers is 135mm, motor speed normally drops to 2000rpm when using the lathe to machine metal..
?¡¾USE RANGE¡¿ Lathe tool is made of high speed steel material, which can machine soft metal, nonferrous metal and precious metal..

Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

Rannb End Mill Cutter 1/16\ Cutting Dia 1/4\ Shank Dia 4 Flutes End Mill Drill Bit - 5pcs

⭐【Material】The end mills are made of High Speed Steel,high hardness,good wear resistance and durability..
⭐【Pack of 5pcs】Sold in pack of 5pcs of end mill cutters..
⭐【Good Design】 Large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
⭐【Applicable Material】Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.And Circuit boards,Metal,Majority of plastics, Wood, Fibre glass, Carbon and environmental board..
⭐【Heat Treatment Process】The High Hardness Steel go through the heat treatment process so the end mill is more durable. Reduce changing times and improve the production efficiency..

Check Stock

AUTOTOOLHOME 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ 1/2\ high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32\ 1/16\ Set of 8

Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..

Check Stock

YOYO TOOLS, Carbide Square Nose End Mill Set- Metric Carbide End Mill CNC Milling Cutter Tungsten 4 Fultes by YOYOTOOLS (D8+D10 End Mill)

8mm and 10mm End Mill Set, Material : Tungsten Carbide.
End Mill Cutting Diameter : 8mm , 10mm, HRC55 degrees.
Suit for: with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..

Check Stock

OREI eARC 4K 60Hz Audio Extractor Converter 18G HDMI 2.0 ARC Support - HDCP 2.2 - Dolby Digital/DTS Passthrough CEC, HDR, Dolby Vision HDR10 Support (HDA-927)

Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..

Check Stock

Bestgle 4Pcs 6mm(1/4”) Shank Tungsten Carbide Rotary Cutting Burr Die Grinder Bit for DIY Woodworking, Metal Carving, Polishing, Engraving, Drilling, 150-160mm Length

Set of 4 Double Cut Solid Carbide Rotary Burr Set, Shank diameter: 6 mm(approach 1/4 inch), Cutting edge diameter: 7mm-10mm, Total length: 150-160 mm.
The service life of tungsten steel rotary burr is 10 times longer than high-speed steel and 200 times longer than grinding wheel.
High performance on processing Copper, Aluminum, Alloy, Iron, Marble, Jade, Steel, Glass, Wood and Plaster etc. machining hardness can reach to HRC70.
Generally use with handheld electric or pneumatic tool drive (can also be used in machine tool). The speed of the electric or pneumatic tools usually is 6000-50000 revolutions per minute.
Excellent for fine detail work,widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding,ect.

Check Stock