Top High power Motor Driver Reviews

DS18 PRO-DRNEO 2\ Throat Bolt On Neodymium Compression Driver 3\ Titanium Voice Coil 800 Watts 115dB 8-Ohm (Single)

DS18 designs its Compression Drivers with aluminum horns to make sure they are above and beyond the standard high frequency driver/tweeter/horns in the market. These bad boys give so much clarity to their frequencies that any audio enthusiast would believe their whole sound system is ready to deploy for a major concert..
PEAK POWER HANDLING - At 800W Max and 600W RMS the PRO-DRNEO neodymium compression (horn) driver boasts out-of-this-world power handling for a Pro audio sound you will love..
TOP QUALITY NEODYMIUM MAGNETS - Neodymium magnets provide a higher magnetic flux density in the air gap, which generates a much greater action force in the voice coil. DS18 manufacturs nothing but the best..
NEODYMIUM MOTOR STRUCTURE - Provides the most motor force of any other driver motor on the market. Intense high frequency loudness without sacrificing sound quality..
USE WITH A WIDE VARIETY OF HORN STYLES - This compression driver features standard 3" (101.6mm) TPI threading, which allows it to work as a replacement driver for many popular horns..

Check Stock

18V SubCompact Brushless 1/2 in. Drill/Driver and Impact Driver Combo Kit

Drill/Driver: All Metal Gears For extended durability.
Drill/Driver: 24 Position Clutch Ring For ultimate precision when driving.
Impact Driver: Quick-Release Hex Collet Spring ejection for easy loading and removal.
Impact Driver: High Torque Output 0 - 1,800 in-lbs. of Torque.
Brushless Motor Technology Delivers more runtime, more power, and longer motor life.

Check Stock

RIDGID 9 Amp Corded 1/2 in. Spade Handle Mud Mixer

Brushless Motor Technology delivers more runtime, power, and longer motor life.
Impact Driver: SubCompact model is 30% less weight and 35% more compact in comparison to RIDGID OCTANE Brushless Impact Driver R86039B.
Impact Driver: High torque output with 1,800 in./lbs. of torque and 2,900 RPM.
Impact Driver: Quick release hex collect ejection for easy loading and removal.
Battery: Up to 2X more runtime and has 2X longer life compared to standard lithium-ion batteries.

Check Stock

Bosch 18V 2-Tool Combo Kit with 1/2 In. Compact Drill/Driver and 1/4 In. Hex Impact Driver GXL18V-26B22

COMBO KIT: The Bosch GXL18V-26B22 is a reliable compact combo kit that includes two 18V tools (impact driver and drill/driver) designed to fit in tight areas and to provide Pro performance, along with two 2.0 Ah 18V batteries and a charger.
EFFICIENT: Featuring an efficient impact driver hammer-and-anvil system, the combo kit delivers Pro performance, with 1, 400 in.-Lbs. of max. torque in a lightweight tool that weighs just 2.4 lbs.
LIGHTWEIGHT: The included drill features a light but powerful drill motor that provides outstanding drilling production in a tool that weighs just 2.8 lbs..
VARIABLE SPEED: Featuring a variable-speed drill that furnishes control for high-speed (0-1, 700 no-load RPM) and high-power (0-450 no-load RPM)..
POWER: With a robust impact driver motor, the Bosch GXL18V-26B22 delivers a max. Of 3, 600 BPM for professional power..

Check Stock

Cordless Impact Driver Kit,20V MAX 1/4" Impact Driver Set with 1350 in-lbs Torque,Brushless Power Impact Driver with 2.0Ah Li-ion Battery,1 Hour Fast Charger and Tool Bag,LED light (Orange)

【High Efficient Torque & Variable Speed】Are you troubled by intermittent operation？The powerful impact driver delivers 1350 In-lbs Max torque & 2200 RPM to provide you a consistent working process and keep the most fastening torque than a cordless drill. Also, you can adjust the variable speed you like by pressing the trigger button. In short, the powerful impact driver can help you force the driver bits into wood/metal/ or different type surface easily w/ the high performance impact driver..
【Ultra Quality Battery】 Are you still struggled with the discontinuous operation? Worried about the battery remains? This durable impact driver equipped w/ ....

Check Stock

RATTMMOTOR 400W Blushless CNC Air Cooled Spindle Motor ER8 12000RPM + 600W Blushless Spindle Motor Driver LCD Panel without Hall + 55mm Clamp Mount for CNC Router Milling Machine

【Brussless Spindle Motor】Power: 400W.
Note: Please see clearly that this spindle motor output shaft is with ER8 collet,and output shaft is complete shaft, can't be exchanged to ER11, ER16....
【Brussless Spindle Motor Driver】Maximum driver power: 600W.
Maximum driver motor running speed: 12000R/Min.
Brushless spindle driver（Model Name: NVBDL）is specialized for the ecomomic engraving machine,it matchs with the brushless DC motor. With the....
The users can take down the panel from the main driver and install it on the controller cabinet.By the panel,you can set the parameter,control motor....

Check Stock

Large Current 50A H-Bridge High-Power Single-Channel Motor Driver Module Semiconductor Refrigeration

【H-bridge Driver Module】The drive uses a full H-bridge driver module full-bridge MOSFET driver chip and composed with very low internal resistance and high current. MOSFET H-bridge driver circuit, with strong drive and braking effect, signal isolation chip isolates motor drive effectively..
【Effective Protection】With the microcontroller PWM signal isolation, effectively protect microcontroller..
【Input Maximum】To achieve the motor forward and reverse rotation, two PWM input maximum 200kHz frequency..
【Fully Compatible】Power indicator is schematically clear. The power supply voltage 5V to 15V. 3.3V to 12V, PWM level is fully compatible. High current 50A..
【Warm Tips】Ffor your safety and protection of use, our product is tested to ensure trouble-free installation and performance, please rest assured to buy..

Check Stock

Bosch GDX18V-1800CB15 18V Brushless Impact

Versatile two-in-one impact driver and impact wrench design – features a versatile hex shank with power Groove and a socket drive.
Powerful EC Brushless motor – delivers a max of 1, 800 in.-Lbs. Of torque and up to 4, 200 IPM for professional power.
CORE18V battery – provides next-gen li-ion 21700 Cell technology in a lightweight, high-power battery with optimal performance.
Electronic cell and motor protection – helps protect the tool and battery from overloading conditions.
Half driver, half wrench – features a 1/4 in. Quick-change hex shank with power Groove and a 1/2 in. Square drive, for using either bits or sockets.

Check Stock

3 Axis CNC Kit Nema23 Stepper Motor Dual Shaft 425oz-in 112mm 3A & Driver 40VDC 4A 128 microstep for CNC Router Milling Engraving Machine

♞【Product】3 Axis nema23 stepper motor driver usbcnc controller kit.
♞【Nema 23 Stepper Motor】 Nema 23 Stepper Motor / Holding Torque: 425oz-in,280Ncm / Motor Size:57x57x112mm / Phase:2 / 4pcs lead wire / 1.8 Step.
♞【Stepper Motor Driver】FMD2740C Stepper Motor Driver / 4Amps / Support voltages:12 to 50V DC / 128microstep.
♞【4 Axis USBCNC breakout board】 Come with Hand Control with USB Cable / Only support USBCNC software / input voltage: 15-36V DC..
♞【DC Power Supply】400W 36V 11A DC Switching power supply.

Check Stock

New Milwaukee 2313-21 12 Volt M12 Cordless Inspection Camera System Scope Sale

2804-20 hammer drill: POWERSTATE brushless motor delivers up to 60% more power, is the most compact in its class at 6.9 in. L, and provides up to 2X faster speed under heavy load 2804-20 hammer drill delivers up to 1,200 in./lbs. of torque Compatible with all M18 batteries and tools.
2853-20 impact driver delivers up to 25% more torque with up to 2,000 in./lbs. to complete more demanding applications 2853-20 impact driver: most compact impact driver at 4.59 in. L providing more access in tight spaces M18 FUEL SAWZALL is the fastest cutting reciprocating saw in its class and leverages a POWERSTATE brushless motor to provide users with 3,000 SPM with a 1-1/4 in. stroke length for faster material removal.
2730-20 6-1/2 in. circular saw: POWERSTATE brushless motor provides increased cutting speed and power through the toughest applications M18 FUEL 1/2 in. mid-torque impact wrench with friction ring delivers the best power to weight ratio, most access in tight spaces, and faster removal speed, it provides 650 ft. lbs. of nut-busting torque and only weighs 5.1 lbs..
4-1/2 in./5 in. grinder with paddle switch: POWERSTATE brushless motor delivers maximum sustained power to complete the toughest grinding, surface prep and cutting applications.

Check Stock

BOSCH GXL18V-240B22 18V 2-Tool Combo Kit with 1/2 In. Hammer Drill/Driver, 1/4 In. and 1/2 In. Two-In-One Bit/Socket Impact Driver and (2) 2.0 Ah SlimPack Batteries

BRUSHLESS 18V COMBO KIT: Includes two tools (impact driver and hammer drill) for power, with two SlimPack 2.0 Ah batteries.
HALF DRIVER, HALF WRENCH: Features a 1/4 In. quick-change hex shank and a 1/2 In. square drive, for either bits or sockets.
POWERFUL HAMMER DRILL/DRIVER DESIGN: Made with a brushless motor to deliver runtime and power for tough applications.
POWERFUL EC BRUSHLESS MOTOR: Both impact driver and hammer drill have EC Brushless motors for superior efficiency.
UPGRADED METAL CHUCK: Featured on hammer drill/driver for greater durability, with greater power transfer.

Check Stock

PORTER-CABLE 20V MAX* Cordless Drill Combo Kit Brushless 2-Tool PCCK619L2

Brushless Motor Provides 50% More Run Time.
Pcck607 1/2" Drill/Driver Contains Powerful Motor With 370 Uwo Of Power For Heavy-Duty Applications With Minimal Stall.
Drill/Driver Has A Two-Speed Transmission With 450/1, 800 Rpm.
Pcck647 1/4" Impact Driver Transmission Provides 1, 400 In-Lbs. Of Torque For Large Fastening Applications.

Check Stock

DEWALT XTREME 12V MAX* Cordless Drill Combo Kit (DCK221F2)

DCD701 12V MAX* Brushless 3/8 inch drill/driver has 32% more power**.
DCD701 12V MAX* Brushless 3/80-inch drill/ cordless impact driver is 20% shorter**.
Brushless motor for maximum runtime and durability.
The drill/driver has a 3/8 inch ratcheting chuck for a wide variety of bits.
The drill/driver has a high speed transmission with 2-speed settings and 15 clutch settings.

Check Stock