Top High performance Tapered Reamer Cutter Reviews

QWORK Chucking Reamer Set, 8 Pcs HHS H8 Straight Shank Machine Chucking Reamer Milling Cutter, 3/4/5/6/7/8/9/10mm

  • ⭐The reamer set are made of high speed steel, high hardness and good toughness, long service life..
  • ⭐With sharp cutting-edge, the chucking machine reamer set have high cutting ability, high accuracy and clean cutting..
  • ⭐This HSS H8 reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
  • ⭐The straight shank milling cutter tool set are widely used for bore machining, reaming to mould processing and handicraft processing, installed in drilling machine, milling machine, etc.
Check Stock

RIDGID 32920 Model 15 Screw Feed 3/16\ to 1-1/8\ Tubing and Conduit Cutter with X-CEL Knob, Silver

  • SCREW FEED TUBING CUTTER: Delivers clean square cuts to aluminum, copper, brass, and thin-wall steel tubing with a diameter of 3/16 in. to 1-1/8 in. for an optimized performance with each use.
  • EASY PREPARATION: Convenient fold-away reamer stored in the frame for easier tube cleaning preparation to ensure an efficient connection.
  • MAXIMUM ACCURACY: Constructed with a high-quality steel cutting wheel for a long life and a spare wheel stored in the knob.
  • ERGONOMICALLY DESIGNED: Large X-CEL knob provides a firm and controlled grip for quick and easy tube cutting.
  • FAST CUTTER WHEEL CHANGES: X-CEL detent wheel pin allows for simple cutter wheel changes within seconds with no tools needed and no lost clips.
Check Stock

CG2-11 PIPE CUTTER MAGNETIC GAS MACHINE TORCH BURNER BEVELER CUTTING PIPE BEVELING ​MACHINE

  • 【Perfect Set】The set includes a heavy duty tube cutter, mini tubing cutter and an inner-outer reamer. It can not only meet your pipe cutting need, but also fast clean inner reaming and outer deburring needs. The pipe cutting tool is very suitable for cutting pipes of aluminum, copper, PVC, thin stainless steel tube..
  • 【Exquisite Craftsmanship】MATEWORK professional heavy duty pipe cutter is made of high-quality aluminum alloy & SKD steel with high hardness up to HRC52. It has 6 pieces of individual bearings allowing for increasing cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting. After many tests, the cutting capacity up to 3/16 to 2-inch outside diameter with the thickness of 1/6-inch..
  • 【Meet Your Needs At Any Time】Mini tubing cutter is Specially designed for small diameter tubes in confined spaces, cut through 1/8 to 7/8-inch outside diameter pipes with a maximum thickness of 1/10-inch especially for use in restricted areas where a complete turn is not possible, improve your work efficiency..
  • 【Deburring Tool】Pipe reamer has 3/16 to 1-5/16 inch outside diameter capacity. It can be quickly, cleanly and conveniently applied to the inner diameters of copper, aluminum, PVC and soft steel t....
Check Stock

nuwfrog Tubing and Pipe Cutter 1/8 to 1-3/8 Inch with Extra Blade and Reamer for PVC Thin Stainless Steel Tube, Metal,Brass - Copper Pipe Tubing Cutter

  • 【Efficient and convenient】 The operation of cutting copper, brass, aluminum，thin stainless steel,PVC,PE tubes from 1/8"-1-3/8" (3-35mm) O.D. becomes more easy, clean and efficient..
  • 【Fine workmanship】High-quality alloy steel grinding blades, extremely sharp.The body is made of lightweight,durable aluminum alloy casting..
  • 【Versatile】This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops..
  • 【Ergonomic design】Knob provides a firm grip. Cutting tubes become a comfortable and quick task..
  • 【EXTRA blade and Reamer】Our pipe cutter also comes with an extra blade and a reamer .so you can cut as much steel tube as possible and help you clean the pipe. We truly believe our Tubing Cutter is the best in the marketplace and we stand by that. If our tube cutter doesn’t cut it, we’ll FULLY REFUND YOU. So, click "Add to Cart" now and buy with confidence..
Check Stock

5/8 Drill Bridge/Construction Reamer with 1/2 Shank Chuck,HSS Taper Bridge Reamer Bit Tool for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole

  • The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our reamer bit aligns and enlarges pre-drilled holes ready for bolting..
  • Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8" before using our 5/8" Bridge/Construction Reamer..
  • The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm..
  • The 5/8" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 5/8". At first there must be a 3/8" pre-drilled hole,then ream out to 5/8"..
  • Commonly used in bridge,construction,steel erection and automotive truck trailer industries,specially use in structural materials such as steel, metal, alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..
Check Stock

MATEWORK Pipe Cutter - Fast Tubing Cutter Set with Mini Cutter & Deburring Tool Pipe Cutter Tool for Cutting 3/16 to 2 Aluminum Copper PVC Stainless Steel Tube for Plumber and Home Working 3PCS

  • 【Perfect Set】The set includes a heavy duty tube cutter, mini tubing cutter and an inner-outer reamer. It can not only meet your pipe cutting need, but also fast clean inner reaming and outer deburring needs. The pipe cutting tool is very suitable for cutting pipes of aluminum, copper, PVC, thin stainless steel tube..
  • 【Exquisite Craftsmanship】MATEWORK professional heavy duty pipe cutter is made of high-quality aluminum alloy & SKD steel with high hardness up to HRC52. It has 6 pieces of individual bearings allowing for increasing cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting. After many tests, the cutting capacity up to 3/16 to 2-inch outside diameter with the thickness of 1/6-inch..
  • 【Meet Your Needs At Any Time】Mini tubing cutter is Specially designed for small diameter tubes in confined spaces, cut through 1/8 to 7/8-inch outside diameter pipes with a maximum thickness of 1/10-inch especially for use in restricted areas where a complete turn is not possible, improve your work efficiency..
  • 【Deburring Tool】Pipe reamer has 3/16 to 1-5/16 inch outside diameter capacity. It can be quickly, cleanly and conveniently applied to the inner diameters of copper, aluminum, PVC and soft ste....
Check Stock

4Pcs Drill Bridge/Construction Reamer Bit Set 3/8 1/2 5/8 3/4 with 1/2 Shank HSS Taper Chucking Reamer Bit Tool for Steel Metal Wood Alloy Drilling Hole with Aluminum Box

  • What it does: Heavy-duty high-speed steel bridge reamers,expand or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass, or any material of similar hardness prior to rivet or bolt installation, Deburring and trimming of holes in structural materials.
  • Application: Especially for steel, metal, alloy aluminum, brass, plastic, iron, nickel, copper, cast iron and other structural materials.
  • Design: Tapered point design allows reamer bits to enter irregular overlapping holes, aligning bolt holes.
  • Includes: 3/8" (fits 3/8'' shank collets), 1/2", 5/8" and 3/4" (fits 1/2'' shank collets).
  • Design: Tapered point design allows reamer bits to enter irregularly overlapping holes, aligning bolt holes.
  • three symmetrically placed flats on shank provide a secure grip for portable power and air tools.
Check Stock

Wostore Double Flaring Tool Kit for 3/16″-5/8″ 7 Dies Automotive Line Tubing Cutter with Replacement Blade and Remear

  • 【Set Included】Flare bar x 1, flaring cone x 1, flare adapters x 7, tubing cutter x 1 and carrying case x 1..
  • 【Multifunction】Double or single automotive flaring tool set,Creates 45 degree double or single flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration. Suitable for most soft steel, aluminum, brass and copper pipes.Pipe cutter has 2 rollers secure the tube better.
  • Fold-away slide lock tube reamer deburring blade for a better connection.
  • 【Application】Double automotive flare tool kit suitable: 3/16”, 1/4”, 5/16”, 3/8″, 7/16″, 1/2″, 5/8″(5,6,8,10,12,14,16mm).
  • Tubing cutter has a 1/8 to 1-1/8 inches (3-30mm) capacity with inner outer reamer..
  • 【Durable Design】Yoke Heat-treated steel material for maximum strength and longevity that resists corrosion.Swivel constructed from chrome-plated alloy steel to reduce friction..
  • 【Portable】Heavy-duty plastic blow-molded carrying case with latches and handle for easy transportation, safe storage and quick organization. Instruction includes for use easily..
Check Stock

KOOPOOL Double & Single Flaring Tool Kit for Brake Line HVAC System with Tube Cutter Extra 7 Adapters,Brass Copper Pipe 45 Degrees Flaring Tool

  • 【Multifunction】This flaring tool creates 45-degree double or single flares. It can be applied to copper, aluminum, brass, magnesium, and other soft steel lines. Ideal for brake line, HAVC, air conditioning brass line and so on.
  • 【Durable Material】Yoke made of heat-treated steel material for maximum strength and longevity. Swivel made of chrome-plated alloy steel to reduce friction.
  • 【Applications】Double flaring tool kit suitable for: 3/16”, 1/4”, 5/16”, 3/8", 7/16", 1/2", 5/8" (5, 6, 8, 10, 12, 14, 16mm) single or double flares.
  • Tubing cutter has a 1/8” to 1-1/8” inches (3-30 mm) capacity with inner / outer reamer.
  • 【Tubing Cutter Included】Pipe cutter has 2 rollers and fold-away slide lock reamer deburring blade.
  • used to cut steel, aluminum, and copper tubing.
  • cutting wheel life and adjustment amount for each turn depends on material hardness.
  • 【Easy Storage and Portable】Heavy-duty plastic blow-molded carrying case with latches and handle for easy transportation, safe storage and quick organization.
Check Stock

Wostore Double Flaring Tool Kit for 3/16"-5/8" 7 Dies Automotive Brake Line Tube Cutter with Replacement Blade and Reamer

  • ...on】Double or single automotive flaring tool set,Creates 45 degree double or single flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration.Suitable for most soft steel,aluminum,brass and copper pipes.Pipe cutter has 2 rollers secure the tube better.
  • Fold-away slide lock tube reamer deburring blade for a better connection.
  • 【Application】Double automotive flare tool kit suitable: 3/16”, 1/4”, 5/16”, 3/8", 7/16", 1/2", 5/8"(5,6,8,10,12,14,16mm).
  • Tubing cutter has a 1/8 to 1-1/8 inches (3-30mm) capacity with inner outer reamer..
  • 【Durable Design】Yoke Heat-treated steel material for maximum strength and longevity that resists corrosion. Swivel constructed from chrome-plated alloy steel to reduce friction..
  • 【Portable】Heavy-duty plastic blow-molded carrying case with latches and handle for easy transportation, safe storage and quick organization. Instruction includes for use easily..
Check Stock

GUPE Milling Cutter Tool Reamer Tight Holding 5689003cbr/003ein wearresistant 9SiCr for Metal

  • FOR VARIOUS METAL MATERIALS: reamer is widely used in steel, die steel, aluminum alloy, cast iron, copper, galvanized pipe and other metal materials.
  • DURABLE 9SICR MATERIAL: Adopt good quality 9SiCr overall forging, the cutter body is firm, wear resistant and durable, and adopt processing.
  • TIGHT AND ACCURATE: Come with universal shank type, widely used, possess tight clamping, , and high grinding accuracy.
  • 21‑23MM RANGE: Equipped with a storage box, easy to store and carry. There are a total of 6 flutes on the reamer, range from 21-23mm.
  • FLEXIBLE ADJUSTMENT: Fully automatic refining process is adopted, which can be passed or stopped to meet the technical requirements of processing, very flexible.
Check Stock

YaeKoo 2 pcs Tapered Reamer T Handle 6 Fluted Chamfer Bridge Pin Hole Hand Held Reamer Sizes 1/8\-1/2\ (3-13mm) & 5''-5/8'' (5-16mm) Handle Drilling Tools

  • The Tapered Reamer is used to remove burrs from steel, brass, aluminum, plastic, wood and wall panels.
  • The T Reamers are Precisely machined cutting edges smooth the surface of the metal without effort.
  • Reamer T handle for easy reaming.The removable handle facilitates compact storage..
  • Material of Taper Reamers: high carbon steel heat treatment, longer service life.
  • Packing includes :2 pieces Bridge Pin Hole Reamers, 1/8" -1/2 "(3-13mm) size and 1/5" -5/8 "(5mm -16mm) size.
Check Stock

LENOX Tools Replacement Wheel for Tubing Cutters, Copper Cutting, 2-Pack (21192TCW158C2)

  • 4-roller tracking system keeps the tube from threading when using a tube cutter.
  • Cleanly and easily deburr pipes with the replaceable machinist's reamer.
  • Full-stop feed system prevents tube cutter wheels and rollers from coming into contact.
  • Change out tube cutter wheels quickly and easily.
  • Store an extra cutting wheel in the handle.
Check Stock