Top High Voltage System Reviews

Lavamatic WS-10521 Electronic Surge Protector for Washing Machine – Front Top Load Washers

BEST PROTECTION: Protects against high and low voltage, brownout, spike, instant surge, power failure, voltage fluctuation and load shedding. High voltage Shutoff (135VAC), low voltage Shutoff (90VAC).
USAGE: Specially designed to protect washing machines against lightning strikes and other power overload situations.
DELAY: The delay period indicator turns on when the LAVAMATIC is first plugged to the power outlet or after a power outage. It starts a 3 MINUTES time delay to allow stabilization of the system. PLEASE WAIT 3 minutes before you plug in your appliance the first time you use this unit.
LIGHT INDICATORS: Light indicators for Normal, High, Low voltage and Time Delay.

Check Stock

Isolation Amplifiers Isolated Modulator (5 pieces)

➤【DC12-32V】- This isolation module need two complete independent DC12-32V power supply..
➤【Main function】- Main function is input 0-10V analog voltage signal,after isolation, output 0-10V analog voltage signal..
➤【Scope of Application】- Used to isolate high voltage or strong interference voltage or current (voltage) signal then transferred to PLC or controller MCU, isolating controlling end and controlled end, to assure stability and anti-interference ability of system..
➤【Use】- It will has better performance if install this module and controller in a metal box and box is grounded..
➤【Note】- The potentiometer is used to amend corresponding relation of output voltage. Output voltage can be fine adjusted and calibrated, normally it has already been calibrated..

Check Stock

Refrigmatic WS-36300 Electronic Surge Protector for Refrigerator – Up to 27 cu. ft. (2 Pack)

BEST PROTECTION: Protects against high and low voltage, brownout, spike, instant surge, power failure, voltage fluctuation and load shedding. High voltage Shutoff (135VAC), low voltage Shutoff (90VAC).
USAGE: Recommended for domestic refrigerators up to 27 cu. ft., ice makers and air conditioners up to 5000BTU.
DELAY PERIOD: The delay period indicator turns on when the REFRIGMATIC is first plugged to the power outlet or after a power outage. It starts a 3 MINUTES time delay to allow stabilization of the system. PLEASE WAIT 3 minutes before you plug in your appliance the first time you use this unit.
LIGHT INDICATORS: Light indicators for Normal, High, Low voltage and Time Delay.

Check Stock

ATO Phase Voltage Monitoring Sequence Relay 1 Phase Voltage Protection Relay Under Over Voltage with 1 CO + 1 NC Contacts AC/DC 24-48V

【Measuring Circuit】Phase sequence protection relay is compatible with AC and DC supply, the rated voltage is AC/DC 24-48V.
【High-quality Product】LCD display indicating voltage, operation and fault status, adjustable reset mode: automatic/manual/automatic with power-on delay reset, fault recording for the lately 3 faults.
【Mutiple Functions】Adjustable overvoltage and undervoltage threshold, independent adjustable delay time for over-voltage, under-voltage.
【Output Contacts】Monitoring relay with 1 CO + 1 NC contacts, and the capacity is 6A, 250V AC (resistive load).
【Wide Applications】Voltage monitoring sequence relay can be applied in equipment or devices from undervoltage and overvoltage in the applications like air compressors, electric motors, pumps, fans, air-conditioning system, blowers, elevators, cranes, refrigeration equipment, laser equipment, industrial control system, etc..

Check Stock

Skoolie!: How to Convert a School Bus or Van into a Tiny Home or Recreational Vehicle

...which can provide you with a convenient and practical using experience. -【Please note】 If you feel the induction system of this product is too sensitive, you can refer to the manual to adjust the sensitivity of the alarm yourself..
【Specification】Main unit: Working voltage: DC 12 ±3V Static current:10 mA Siren: 10A Working frequency: 433.92MHZ Remote control: Working voltage: DC 12V Average static current:0 mA Battery:6V CR2016*2 About installation: The product need installed by the Profesionales with Car electrician certificated OR by oneself For 12V DC car The item without central door lock functons.

Check Stock

Acouto 20A Car Power Supply Converter Step Down Transformer 24V to 12V with Cigarette Lighter Universal Fit for Car Audio LED Radio Truck Bus

This product is made of high quality aluminum alloy shell, high strength and durable to use..
Allows you to convert DC 24V voltage to DC 12V voltage. Car voltage converter converts unstable voltage into stable voltage output..
Built-in multiple protection including overload, overheat, multi-voltage and short circuit protection..
Suitable for car audio, walkie-talkie, LED, radio, taxi advertising, monitoring system, car display, truck, bus..
Quality Assurance---- As a professional seller, high quality products and services have always been what we stick to. Every product has passed the quality inspection before leaving the factory. Please confirm whether the product is suitable before purchasing.

Check Stock

60 amp MPPT Charge Controller 12V/24V/36V/48V, Solar Charge Controller mppt Max 160VDC Input LCD Backlight Solar Charge for Sealed Gel AGM Lithium Battery

60A MPPT Charge controllelr, 100% MPPT 60A solar charge controller Intelligent, Max efficiency ≥98.1%, PV utilization ≥99%.Built-in DSP controller with high performance Automatic battery voltage detection 12V/24V/36V/48V, Make sure batteries' voltage more than 12V to boost controller and make sure battery has enough power to Self-detection when connected to the controller..
Fit for 12V/24V/36V/48V battery, USER(can be set Lithium, Lifepo4, Li(NiCoMn)O2)/Flooded/Sealed/Gel battery, User programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer..
Built-in cooling fan, Fan will ON when temperature 003e45℃ and off 003c 40℃,Porous heat dissipation and fan use BEARING technologies increase life UP TO 5000hrs in normal use..
Very detail display with Blacklight---LCD Dispaly PV voltage/output power/Battery voltage/charging current/working mode/Temperature, ☀ TROUBLESHOOTING function and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters..

Check Stock

Whatever (Japanese EP)

✦Tracer-AN series support PC software, APP and MT-50 to monitor or set the parameters. Automatically identifying 12/24/36/48V DC system voltage, compatible with various battery options: Sealed, Gel, Flooded and Lithium..
✦Maximum input current: 100A. Maximum PV input power: 1250W/12V.
5000W/48V. Maximum input voltage(open circuit voltage): 150V. Common negative grounding..
✦Advanced MPPT technology & ultra-fast tracking speed, with tracking efficiency no less than 99.5%.
maximum DC/DC transfer efficiency is as high as 98.6%, full load efficiency is up to 98%..
✦With Battery temperature compensation function, real-time energy recording and statistical function. Hundred percent full load operation in working environment temperature range within charging & discharging..
✦The isolated RS485 interface with standard MODBUS communication protocol support up to 8 charging in parallel, so that can be widely used for various applications, e.g. solar RV, household system and field monitoring etc..

Check Stock

Smart Bluetooth 12V 300Ah Deep Cycle LiFePO4 Lithium Iron Phosphate Battery, Low Temperature Charging (-4℉/-20°C), 4000+ Deep Cycles,Built-in 200A BMS, Mobile Phone APP Monitors Battery SOC Data

【App Smart Monitor】Compared with the traditional battery monitor, Bluetooth lithium battery has add Bluetooth function and Obtain Various Data (Soc) Of The Lithium Iron Phosphate Battery. Customers Can connect to the battery through the mobile phone app, and read the battery Voltage, Current,Charging Power,Battery Capacity and Battery Cell Temp,Series/Parallel Battery And Other Important Information at any time. Wireless connection range: within 5-10 meters from the Battery..
【Heating Function】When the smart battery starts charging, it will Auto turn on the heating function inside the battery. Ensure that the battery cell delivers power in the suitable possible condition. When the ambient temperature is lower than 32°F (0°C), the charging current will supply power to the heating film inside the battery. When the internal temperature of the battery reaches 50°F (10°C), BMS will immediately turn off the heating function, all the charging current charges the battery..
【Built-In 200A BMS】12V Lithium Battery has Built-In BMS (Battery Management System) to monitor the voltage of every cell and protect it from overcharge, over-discharge, overload, overheati....

Check Stock

Painless Performance 30100 Universal 70-amp Electric Fan Relay Kit

Ideal for use with high amperage single fans or with standard dual cooling fan applications.
Protects the electrical system from voltage and amperage spikes and prevents the fan from feeding voltage back through the vehicles' wiring system.
Kit includes: SPST 70-amp heavy duty relay, relay base with harness (6' input, 2' output), 70-amp maxi fuse with mounting base and cover, crimp on terminals & mounting hardware.

Check Stock

Spark Tester Auto Ignition Tester Pen Ignition Spark Indicator Spark Plugs Wires Coils Diagnostic Tool Car Voltage Cable Tester Detector

...ar's ignition system is working properly, avoid fire and burn out the ignition coil. This new high-pressure detector is very easy to use. If the ignition system is OK, the internal LED indicator will show you..
✿No need to disassemble: No need to disassemble any line to test the performance of the spark plug, high voltage wire and ignition coil. When the engine is started or running, place the end of the detection pen on the high voltage wire light-emitting tube..
✿High-quality materials: This ignition test pen is made of high-quality aluminum material, which makes the product have good durability and high quality. With durability and high quality. Very environmentally friendly, this material has a dense oxide film on the surface. This film prevents corrosion, so it is very durable..
✿Convenient and fast: This professional test pen is made according to production technology, providing a healthy and reliable troubleshooting method, convenient, economical and time-saving. The metal tip of this test pen makes the product easy to insert and rugged, making it your right choice. The slotted end of the test part makes the contact area between the wire and the instrument large, and the test is accurate.
Note: For detailed product parameters, refer to the i....

Check Stock

TUXING 4500Psi Pcp Air Compressor, Scuba Tank Air Compressor, High Pressure Diving Compressor for Scuba Tank/PCP Rifle/Paintball Air Gun Filling Station

LIGHTWEIGHT AND COMPACT: At 51.1lbs. this dual handled high-pressure compressor can be transported with minimal effort and minimal fatigue on the body..
ULTRA QUIET: Built with DC Brushless Motor that is more powerful, quieter and lighter than conventional motors..
AUTOMATIC SYSTEM ADJUSTMENTS FOR MAXIMUM PERFORMANCE: An inverter circuit on the motor adjusts the RPM to extract the maximum performance depending on the voltage level..
USER FRIENDLY DIAGNOSTIC SYSTEM: LED light and beeping system that indicates problems with the compressor (i.e. high temperature or low voltage)..
CONNECT UP TO 4 TOOLS AT ONCE: 4 Air-outlets provide flexibility | 2 outlets for high pressure tools. 2 outlets for regular pressure tools..

Check Stock

Solid State Relay, 90 to 280VAC, 25A

Solid state relay module, long service life and high reliability, low drive voltage and current, widely used in many automatic control systems..
Model: XRE-1D4840 Solid State Relay 40A DC to AC..
Input voltage: 3-32V DC Output voltage: 24-480V AC.
Note: The current of this product is 40A for a long time. A large heat sink or fan need to be added..
Package Content: 2 x 40A Solid State Relay, ideal for automatic process control application, a must component for temperature controller and other machinery control system..

Check Stock