Top High Torque Stepper Motor Reviews

Creality 3D Printer Original Stepper Motor 42-40/1pcs and 42-34/3pcs 2 Phase 0.8A 1.8 Degree 0.4N.M for Most FDM Printer CNC Accessory Replacement 4pcs/Pack

  • 【Widly Compatible】 42-34 Stepper motor apply for 3D printer Ender 3 S1, Ender 3 S1 Plus, Ender 3 S1 Pro (like CR-10 Series Z axis or Ender-3 X/Y/Z....
  • 【Low noise motor】The Creality high quality motor with low power, uniform speed,stableperformance, low noise and no step to lose during the....
  • 【High quality stepper motor】Stepper motor with low noise and efficient heat dissipationhas the large torque and high precision without losing....
  • 【Precise rotation】With high-strength synchronous wheel andsynchronous gear, it realizes accurate constant ratio,uniform revolution and high....
  • 【What You Get】The package include 42-40 motor 1pcs and 42-34 motor 3pcs,this item does not include connecting cable.If need further please fell....
Check Stock

Nema23 2N.m 57 Hybrid Closed Loop Servo Stepper Motor 2Nm 76mm+HSS57 Servo Driver Controller CNC Kit 24-50V DC For CNC Router Engraving Milling Machine

  • Name:Nema23 2N.M Servo Motor Driver CNC Kit.
  • Servo Driver:HSS57 2-Phase Hybrid Stepper Servo Driver.
  • The torque reducing is much lower than open loop stepper motor when it is at higher speed.The high speed performance and torque are enhanced in a....
Check Stock

MINARIK MM23001C 0-90/0-180V-DC 1/4-2HP 5A AMP DC MOTOR DRIVE D506404

  • Motor Driver: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current..
  • Motor Driver: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.The largest 32 subdivision of the 6 models are optional..
  • Package: TB6600 stepper motor driver + nema 17 stepper motor + mounting bracket + inner hexagon spanner + M3/M4 screws.
  • Strive for 100% service satisfactory, any question or problem please do not hesitate to contact us, we are always happy to help..
Check Stock

FYSETC Ender 3 S1 3D Printer Stepper Motor 42-40 Nema 17 Ender 3 CR6 SE Extruder Motor 2 Phase 1A 1.8 Degree with 39.3in Connecting Cable Compatible with Ender 3 Pro V2 Ender 5 Pro Plus CR-10 E-axis

  • Motor Model: 42-40 Nema 17, widely work for Most 3D Printer Reprap Ender 3 CR-10. It fits for the E-axis of Crealit Ender series and the CR series,....
  • High torque -Holding torque up to 0.45Nm. Low noise, have better high speed performance..
  • Size: 42mm X 42mm X 40mm. 2 Phase 4 Wires, with 39.3 in/ 1 Meter cable..
  • With the stepper motor, you will find it easy to solve the problems of uneven extrusion, regularly plugging and material reloading. The line sequence....
  • Package Includes: 1 x 42-40 Nema 17 Stepper Motor.
Check Stock

STEPPERONLINE Nema 34 Stepper Motor 8.5Nm(1203.94oz.in) 6.0A 14mm Key-Way Shaft with 1m Cable

  • NEMA 34 bipolar 2 phase stepper motor wihr 4-lead.
  • Holding Torque: 8.5Nm(1203.94oz.in), Rated Current/phase: 6.0 A, Voltage : 36-60VDC.
  • Application: The stepper motor is widely use for 3D printers, medical equipment, industrial equipment, laser CNC machine, automation devices.
Check Stock

STEPPERONLINE Nema 34 Stepper Motor 4.8Nm(679.87oz.in) 6.0A 14mm Key-Way Shaft with 1m Cable

  • NEMA 34 bipolar 2 phase stepper motor wihr 4-lead.
  • Holding Torque: 4.8Nm(679.87oz.in), Rated Current/phase: 6.0 A, Voltage : 36-60VDC.
  • Application: The stepper motor is widely use for 3D printers, medical equipment, industrial equipment, laser CNC machine, automation devices.
Check Stock

Nema 23 Stepper Motor 4.2A 3.0Nm (425oz.in) 100mm Length with 8mm Shaft for CNC Mill Lathe Router

  • The most powerful Nema 23 stepper motor available. Ideal for CNC Mill Lathe Router..
Check Stock

Iverntech NEMA 17 Stepper Motor with Integrated Tr8x2 2mm Lead 310mm T8 Lead Screw for 3D Printers Z Axis or CNC Machine…

  • Iverntech NEMA 17 Stepper Motor with Integrated 310mm Tr8x2 Lead Screw.
  • High torque nema 17 stepper motor, 500mN.m, 42x42x48mm, 2 phase 4 wires.
  • Come with 1 set anti backlash nut and 1M (39.37") motor wire.
  • Great replacement for 3D Printers Z Axis, CNC Milling, Small Robotics, Stage Lighting, Laser Engraving.
Check Stock

G-Hubble Ender 3 Dual Z Axis Upgrade Kit with Lead Screw Stepper Motor 3D Printer Accessories Parts for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Voxelab Aquila

  • Motor Driver: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current..
  • Motor Driver: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.The largest 32....
  • Package: TB6600 stepper motor driver + nema 17 stepper motor + mounting bracket + inner hexagon spanner + M3/M4 screws.
  • Strive for 100% service satisfactory, any question or problem please do not hesitate to contact us, we are always happy to help..
Check Stock

100mm Length Travel Linear Stage Actuator with Square Linear Rails + CBX1605 Ball Screw 1605 Ballscrew Motorized XY XYZ Linear Stage Table with NEMA23 Stepper Motor for DIY CNC Router Milling Machine

  • 【Product Structure Analysis】- Nema23 Stepper Motor+Stepper Motor Connecting Piece+Coupling+1605 Ball Scew+Slide Block+Sliding Table +Bearing....
  • 【Nema23 Stepper Motor】- Motor length: 56mm. Motor flange size: 57mm.  Holding torque: 1.2N.m. Phase: 2. Current: 3A. Resistance: 0.8 Ω.....
  • 【1605 Ball Screw】- Drive type: CBX1605 ball screw. Effective travel length: 100mm. Screw precision grade: C7. Screw Pitch: 5mm. Flange nut screw....
  • 【Slide Block】- Length: 60mm. M4 sliding nut design on the side, limit switch can be installed at any position. The slider is made of 6030 aluminum....
  • 【Main Application】- The important hardware equipment that constitutes industrialized machinery can accurately control the accuracy and speed of....
Check Stock

Stepper Motor Mounting Bracket, 6pcs Steel Motor Mounting Nema17 Bracket, with Mounting Screws

  • Mounts are thick 2mm metal bent into an L shape. spot-welded 2 little triangle-shaped wedges in the corners. Ideal for replacement applications..
  • Stepper motor bracket durable alloy steel provides strong bearing pressure when printing..
  • Nema17 brackets are 2 long slots so you could easily loosen screws, tighten the belt tension of the motor and belt, and tighten them back down easily..
  • Stepper motor alloy steel mounting bracket can match standard Nema 17 stepper motor, and also include the mounting holes for Nema 17 economy planetary geared stepper motor but not for high precision planetary geared stepper motor..
  • 6 pcs of NEMA 7 stepper motor mounting brackets, 90 degrees L-shaped bracket there are 4 holes drilled to mount for 3D Printer Motors Nema 17 Stepper Motor 42-40 Motor..
Check Stock

Creality Official 42-40 Stepper Motor with Extruder Gear 2 Phase 1A 1.8 Degree 0.4 N.M for 3D Printer Extruder Compatible with E-axis of Ender 3/Ender 3 V2/Ender 3 pro/Ender 5/CR-10 3D Printer

  • Official Guarantee: 100% Creality official stepper motor, our 42-40 stepper motor compatibility with Ender 3/Ender 3 V2/Ender 3 pro/Ender 5/5 pro/5....
  • Parameter: 1.8-degree step angle, 0.4 N.M holding torque, with 1A rated current per phase. (The connecting cable is not included.).
  • High-Quality Stepping Motor: With low power, stable speed and performance, low noise, and no step loss during operation, which ensures the stable....
  • Low Noise & High Precision: It fits perfectly with the high-strength synchronous wheel and synchronous gear, which ensures its high precision, reduces....
  • After-sales Service: If you have any unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team....
Check Stock

BIGTREETECH SKR V1.4 Turbo Control Board 32bit for 3D Printer Compatible with TFT35 E3 V3.0.1/TFT70 Touch Screen Support TMC2209/TMC2208/TMC5160/TMC2130 for Most FDM 3D Printer (with 5*TMC2209)

  • ... ✨On-board TMC-driven SPI working mode and UART working mode, and the on-board DIAG function pins are convenient for customers to use, eliminating the complicated wiring process, which can be used by simply removing and inserting the jumper cap..
  • ✨Compare to other stepper motor driver in the market, our TMC2209 silent stepper driver generate lower heat and it has a large-area cooling position to lower the temperature. It driver can lower 30% heat than others stepper motor drivers even working last for a long time. With Passive cooling on a 10 hours print, they only hit 37℃..
  • ✨BIGTREETECH TMC2209 V1.2 is an ultra-silent motor driver IC for two-phase stepper motors, which adopts stealthChop2 Mute technology which reduces motor noise to the point of silence at low velocities to ensures noiseless operation, maximum efficiency and best motor torque. spreadCycle allow for highly dynamic motion. Drive current 2A, peak current 2.8A, voltage range 4.75V-29V, 256 subdivision..
Check Stock