Top High Pressure Adapters Reviews

Raincovo Pressure Washer Quick Connect Fittings, M22 14mm to 3/8 Inch Quick Connect Pressure Washer Hose Adapter, 4 Pieces

Includes 4 pieces adapters. Pressure washer quick connect fittings make it easier and faster to setup and takedown the hose..
Pressure washer adapters are used for power washer gun, hose and pump connections..
M22 14mm thread fittings are well made. Advanced technology to ensure the high precision of thread and no leaks..
3/8 Inch quick connect fittings are great for snap. Very smooth to attach and release..
Made of brass, high build quality ensures long life. Max pressure is 4500 PSI. Max working temperature is 300 °F..

Check Stock

BACOENG Complete AC Repair Tool Kit for Mini Split/HVAC/AUTO with Tool Bag - Includes 3.6CFM Vacuum Pump, 800PSI Manifold Gauge Kit

【Complete Kit】-an complete refrigerant injection kit for MINI/HVAC/AUTO AC system, with a large-capacity tool bag that can carry all the accessories needed at one time..
【Manifold Gauge】-You could directly read the temperature(℉) and pressure(psi) of R12/R22/R134a/R410a refrigerant on the professional dial. This gauge could be hung on the car/air conditioner cover or other high places through the top hook, freeing your hands for more works..
【Heavy Pressure Hose】-with three high-strength pressure hoses, red for high-pressure pipes, blue for low-pressure pipes, yellow for vacuum pumps.
5FT long for each one, 1/4 SAE to 1/4 SAE, 800 PSI working pressure.
【Powerful Vacuum Pump】-It delivers 3.6 CFM flow rate and 150 Micron vacuum with low noise, which guarantees the vacuum steady of the system. It also make your work moveable and easy to start on its design of handle and manual switch. Motor thermal protection equipped..
【Package include】-Vacuum pump*1 (with vacuum oil*1), manifold gauge*1, Pressure hose*3, car quick couplers*2, 5/16 SAE-....

Check Stock

DASBET 18PCS Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Set with Hand Pump and Nylon Adapters

Hand Pump Leak Detector: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
Leak Detection Tool: The hand pump leak detection tool pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might o....

Check Stock

6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool, High Pressure Oil Rail Adapters Leak Test Kit and 6.0 IPR Valve Socket with Seal Kit Fit for Ford 6.0L Powerstroke Diesel Engine

Fitment: IPR Valve Air Test Fitting and Oil Rail Adapters perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
6.0 IPR Valve Socket compatible with Ford 6.0L and other diesel engines, and Seal Kit fits for 2003-2010 Ford 6.0L V8 Diesel Turbocharged Modles.
High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these tool kit show their high tightness, corrosion resistance and durability.
Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
IPR Valve Air Test Fitting : This tool has 1/4 inch pipe threads to accept standard air fittings.
It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
6.0 IPR Valve Socket with Seal Kit: Use with 3/8" square drive, 12 point design socket can tightly locate your IPR valve in a very tight location, also built to bottom out on the hex so it does not put torque on the connector in case it can be reused (Include IPR Valve Seal Kit OE Number 3C3Z9H52....

Check Stock

STYDDI Pressure Washer Quick Disconnect Adaptor Set, M22-15mm to 3/8\ Quick Release Couplers, All Solid Brass Connector Compatible with Sun Joe, Campbell, MI-T-M, Stanley Electric Pressure Washers

MAKE SET UP AND TEAR DOWN OF YOUR PRESSURE WASHER SYSTEM A BREEZE - STYDDI quick connect adapters convert the screw connections of a pressure washer system into quick connect/release, allowing you to quickly and easily connect or remove a high pressure hose. This quick connectors kit also helps to preserve the thread and seals on your components, extending the life of your pressure washer system..
4-PACK UNIVERSAL PRESSURE WASHER QUICK RELEASE CONNECT SET - This pressure washer quick connect adapter set converts the M22-15mm thread-on couplings to a 3/8 inch quick connectors. It includes 1 x M22-15mm female + 3/8" quick connect plug, 1 x 3/8" quick connect socket + M22-15mm male, 1 x M22-15mm female + 3/8" quick connect socket, 1 x 3/8" quick connect plug + M22-15mm male..
ALL SOLID BRASS FOR A SAFE AND LEAK-FREE CONNECTION - These quick connect adapters are all made of premium 100% brass, which is corrosion and rust proof. They are durable and sturdy, providing a secure and firm connection without water leak or pressure loss. They are no only convenient for frequent connect and disconnect but also offer a long service life without much maintenance..
TOP PERFORMANCE AND WIDE APPLICABILITY - These quick connect adapters provide secure and quick connectio....

Check Stock

Sunluway 6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool and High Pressure Oil Rail Adapters Leak Test Kit Fit for Ford 6.0L Powerstroke Diesel Engine

Fitment: Perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these adapter fittings show their high tightness, corrosion resistance and durability.
Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
IPR Valve Air Test Fitting: This tool has 1/4 inch pipe threads to accept standard air fittings.
It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
100% SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Fittings, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.

Check Stock

18 Pieces Radiator Pressure Pump Cooling System Car Leak Detector Tester Tool Water Tank Adapter Car Coolant Vacuum Cleaner Head Gasket

◇ Function --- This radiator pressure tester kit allows you to change coolant and test for leaks in your vehicle's cooling system, including the radiator, heater core and radiator cap, in a simple and straightforward manner..
◇ Premium Quality --- Made of high quality and durable material, high strength and toughness, providing higher stability and longer service life..
◇ Note ---If the temperature is too high, you may get scalded. Before you open it, make sure the tank is cool when you use it..
◇ Easy to Use --- Remove the original radiator cap, select an available radiator cap from the test kit, and install it on the radiator port. Operate the hand pump until the pressure reaches 10-15psi (avoid reaching 35psi). Check the pressure gauge reading. If the reading drops automatically, the radiator may be leaking. Have the radiator system checked and repaired if necessary. Typically, it takes about 10 minutes to test for leaks and is a very quick and easy operation..
◇ Packing list --- 1*pressure test pump with pressure gauge, 1* thermometer, 3*chrome-plated steel ....

Check Stock

FEXON Fan Clutch Nut Wrench Compatible with BMW E34 E46 E90 E39 E36 Clutch Removal Tool Kit Replaces 70074 Fan Clutch Wrench Set 32mm

Function: The hand pump leak detection tool pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
Specification: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to te....

Check Stock

8MILELAKE 18pcs Radiator Pump Pressure Tester and Vacuum Pump Type Cooling System Kit Coolant Pressure Tester Kit

This radiator pressure tester helps find internal and external leaks in your cooling system..
8 radiator cap adapters included, and the test range is from 0 to 35 psi, ideal for domestic and import vehicles. With the special design of purge and refill tool connection, it fits nearly all type of radiator openings..
The Coolant Pressure Tester Kit Included a Pump with gauge For testing automotive pressurized cooling systems up to 35 PSI Has 8 radiator cap adapters for servicing most domestic and import vehicles..
Large volume pump capacity reduces strokes required to pressurize cooling systems Self-locking quick-disconnect components Thumb-operated relief valve for convenient pressure release..
Package includes: 17pc kit set and Carrying Case. This tool is made of high quality aluminum, rubber and plastic, high strength and good toughness.

Check Stock

20PSI High Pressure SUP Electric Air Pump,Dual Stage Inflation Paddle Board Pump for Inflatable Stand Up Paddle Boards, Boats,Kayak,12V DC Car Connector

【Built in Air Inflator & Deflator】The max pressure of Tuomico paddleboard pump is 20 PSI, Ideal for use on high-pressure inflatables, can inflate and deflate the SUP, Tent and other inflatables quickly. Usually, It takes about 10 minutes to pump up a regular iSUP..
【Digital Pressure LCD Screen & Auto Shut-Off】Accurate air pressure value, accurate to 0.01PSI. Selectable pressure units to PSI / Bar so you can set the pressure at your target level to prevent over inflation.Select your desired pressure and pumps right up and stops on its own. The fully automatic operation makes inflating or deflating ISUP, inflatable tents, inflatable raft,kayak a breeze..
【Extra 5 Universal Valve Adapters】Work with inflatables that use the universal HR valve such as stand-up paddle board, kayak.The Isup pump can also inflate yoga ball,inflatable boats, inflatable dinghy, pool floating, inflatable sofa, inflatable tent, etc..
【DC Car Power Cord Included】 With 11.2 feet DC car power cord ,It is easy to us. Just plug it into cigarette lighter outlet of your car and s it on. 3.3 feet flexible air hose make it more convenien....

Check Stock

BACOENG Professional Vacuum Pump & Manifold Gauge Set - HVAC A/C Refrigeration Kit - Diagnostic R12 R22 R134a R410A - w/ Case

Professional 4 Valve Manifold Set, Diagnostic R134A, R410A and R22 systems. No additional adapters required. Designed for rapid testing, charging and evacuation..
Compact but powerful vacuum pump delivers 3.6 CFM flow rate and 150 Micron vacuum. Cast aluminum housings make the pump lightweight while durable.Thermally protected is good for long time duty..
Blue Gauge (low): 0-550 PSI, Red Gauge (high): 0-750 PSI, Burst pressure: 4000PSI, Max working pressure: 800PSI.
Fahrenheit degree unit with easy to read instrument panel..
Red, Yellow, Blue 5Ft charging hose with 1/4″ Port.
Black charging hose with 1/4″ to 5/16″ Port.
Red = high pressure, Blue = low pressure, Yellow = refrigerant bottle, Black = vacuum pump..
INCLUDE: 1 × 4 way manifold, 1 × vacuum pump, 4 × charging hoses, 2 × adjustable quick couplers, 1 × universal can tap, 3 × adapters, 1 × valve core wrench, 1 × vacuum pump oil, 1 × detailed manual, 1 × toolbag, 1 × hose repair kit.

Check Stock

Kitchen Sink Side Sprayer, Hibbent Kitchen Sprayer Head Replacement with 3.9ft Hose and Holder Kitchen Sink Pull Out Spray Head-Chrome

1.【EASY TO USE】Easy hand held method for washing greasy dishes with a comfortable thumb applied trigger action and easy-to-clean spray head that keep kitchen sink clean..
2.【HIGH PRESSURE SPRAY】Thumb applied trigger action provides high pressure directional power spraying, Very strong water pressure..
3.【EASY TO INSTALL】Kitchen spray set comes with side spray head, 1.2m (47.2inch) braided hose and spray holder. Easy to self-installation, no need plumber..
4.【PREMIUM QUALITY MATERIAL】Engineering grade plastic (ABS) constructed, ensuring quality and longevity. Premiun leading finish making the sprayer head a good match with your kitchen..
5.【EXTRA 12 BRASS ADAPTERS】 1/4-18NPSM-1B and 12 brass adapters available for choose from..

Check Stock

ABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions

TEST INJECTOR SYSTEM FUEL PUMPS: The new and improved ABN Comprehensive Universal Fuel Pressure Tester Master Fuel Pressure Gauge Kit is a complete fuel test gauge package that quickly tests the fuel pump pressure on injector systems.
NEW & IMPROVED: High-quality fuel pressure gauge hose replacements have been improved with implanted fiber.
Fitted with quick coupling system and pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
Recommended for older low-pressure systems with mechanical fuel pumps.
Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.

Check Stock