Top High Power Cpe Reviews

Ueevii 5.8G Point to Point Wireless Bridge CPE028&2 * 1-Pack Wireless Bridge Bracket Mount 360°Adjustment

CPE028 is an outdoor high power and high-performance CPE, which works at 5G frequency. It supports Point to Point and Point to Multi-Point wireless connection. The transmission speed between 2 bridges max is 300Mbps. The highest network speed that can be achieved max is 100Mbps. To achieve the CPE function, one needs to act as a receiver and the other one as a transmitter..
Stainless steel material: The bracket is made of high-quality stainless steel, which has the characteristics of strong and sturdy, corrosion resistance, high temperature resistance, waterproof and lightning protection.
3KM Transmission distance: 3 km (visible unobstructed environment), actual application distance should be less than 3KM. Built-in 14DBi directional antenna can significantly improve the transmission and reception performance of wireless signals. Trees will not block the transmission speed of the wireless bridge, suitable for warehouses or garages next to your house..
360°adjustment: There are many small holes on the wireless bridge bracket plate, you can adjust it for 360°, which can easily meet your installation needs at any angle.
Low Interference: 5G frequency makes it have better anti-interference performance, good compatibility, and strong anti-adjacent channel i....

Check Stock

Wireless WiFi Bridge, UeeVii 5.8G Point to Point Outdoor 2KM Long Range CPE with 24V PoE Adapter 12dBi Antenna 2 * 100Mbps LAN/PoE RJ45 Port,2-Pack

...The CPE451 WiFi bridge has made in-depth protocol optimization for wireless video surveillance transmission, ensuring high-speed video transmission. At the same time, the bottom wireless driver is deeply optimized, with stronger anti-interference ability and better stability..
CPE451 point to point bridge adopts low power consumption, high-performance design, radio frequency index and radiation index are in full compliance with national standards. It supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD) to reduce equipment energy consumption..
This Internet bridge supports a 24V POE power supply, the construction is simplified, and it is safe and reliable. It is managed by AC, and all bridge pairing information is clear at a glance, which is convenient for centralized management and maintenance, and greatly simplifies the difficulty of maintenance. This wireless bridge can also be reused when you relocate, making your cost lower..
Accurate Operating Frequencies: The frequency range that complies with FCC Rule Parts 15E is 5180.1-5240.0 MHZ and 5745.0-5825.0 MHZ.

Check Stock

Wireless Bridge UeeVii 5.8G Outdoor CPE Point to Point Long Range Access with 14DBi High Gain 22 Mimo Antenna PoE Adapter 2 RJ45 LAN Ethernet Port 2-Pack

...rking mode, video network dual compatible.Deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, with stronger anti-interference ability and better stability.
Adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards(FCC). Supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD)， supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable.
Automatic power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 3KM.
The FCC ID: 2A6EJ-CPE450, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Accurate Operating Frequencies: The frequency range that complies with FCC Rule Parts 15E is 5180.1....

Check Stock

TP-LINK (EAP225-OUTDOOR) (867+300) Wireless N Outdoor Access Point, MU-MIMO Tech, Free Software

TP-LINK CPE510 5GHz 300Mbps 13dBi High Power Outdoor CPE/Access Point,.
AP / Client / Repeater / AP Router / AP Client Router (WISP) operation modes.
Wireless Data Transmission Point to Point up to 15 KM++.

Check Stock

KuWFi 2-Pack 300Mbps Wireless Bridges, Wireless Outdoor CPE WiFi Bridge Kit Point to Point Wireless Access Point 2.4G Internet Bridge 1KM Transmission Distance Solution for PTP/PTMP(Pre-Program)

...rking mode, video network dual compatible.Deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, with stronger anti-interference ability and better stability.
Adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards(FCC). Supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD)， supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable.
Automatic power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 3KM.
The FCC ID: 2A6EJ-CPE450, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Accurate Operating Frequencies: The frequency range that complies with FCC Rule Parts 15E is 5180.1....

Check Stock

Gigabit Wireless Bridge Point to Point, UeeVii CPE830 5.8G 1Gbps WiFi Outdoor CPE with 16dBi High-Gain Antenna, Lang Range Up to 3KM, Plug and Play,24V PoE Power, IP65 Waterproof,2-Pack

...ance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, using 5.8G IEEE 802.11ac single-band wireless transmission technology, with stronger anti-interference ability and better stability.
Outdoor wireless bridges adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards. Supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD), supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable. Automatically re-pair when power is restored after a power outage..
Point-to-point wireless bridge built-in 16dBm directional antenna, maximum 27dBm can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 3KM.FCC ID: 2A6EJ-CPE450.

Check Stock

Wireless Bridge,UeeVii CPE-452 Point to Point 5.8G Long Range Outdoor WiFi CPE with 14DBi High-Gain Antenna,24V PoE Adapter,2 LAN Port,for Network and Surveillance Range Extension,2-Pack

UeeVii CPE-452 is an outdoor high power and 5.8G high-performance wireless bridge, that supports point to point and point to Multi-Point wireless connections. Pairing can be done by dialing without having to access the GUI, making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional, and saving much human work and cost..
CPE-452 WiFi bridge built-in 14Dbi high-gain antenna enables the transmission rate between 2 wireless bridges to reach 300Mbps, the highest wire network speed that can be achieved max is 100Mbps. To achieve the bridge function, one needs to act as a receiver and the other one as a transmitter..
Point to point wireless bridge can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 3KM. Trees will not block the transmission speed of the point-to-point internet wireless bridge, suitable for shop warehouses or garages next to your house..
Point-to-point bridge easily helps you expand the network range to the second building(barn, shop, warehouses, garages), or wireless extend the IP camera monitoring range. IP65 Level weathe....

Check Stock

Wireless Bridge Gigabit High Speed, UeeVii CPE820 5.8G 1Gbps Point to Point WiFi Outdoor CPE with 16dBi High-Gain Antenna, Lang Range Up to 3KM, Plug and Play,24V PoE Power, IP65 Waterproof,2-Pack

...ance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, using 5.8G IEEE 802.11ac single-band wireless transmission technology, with stronger anti-interference ability and better stability.
Outdoor wireless bridges adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards. Supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD), supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable. Automatically re-pair when power is restored after a power outage..
Point to point wireless bridge built-in 16dBm directional antenna, maximum 27dBm can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 3KM.FCC ID: 2A6EJ-CPE450.

Check Stock

Wireless Bridge Gigabit, 1Gbps Point to Point WiFi Bridge Outdoor Kit with 16dBi High-gain Antenna, ULNA 5.8G Long Range CPE Up to 5KM, Plug and Play, 27dbm, 24V POE Power, Ip65 Waterproof, 2-Pack

...ep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, with stronger anti-interference ability and better stability.
Adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards(FCC). Supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD)， supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable.
Automatic power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 3KM.
The FCC ID: 2A6EJ-CPE450, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Accurate Op....

Check Stock

4G Outdoor CPE WiFi Router, Yeacomm 3G 4G IP66 LTE CPE Kit | LTE Unit with Sim Card Slot + Indoor AP WiFi Hotspot, 150Mbps CAT4 Mobile WiFi Router,Not for Verizon

...on, if the 4G frequency is B4, then the CPE will not connect to 4G, it will connect to 3G. There is an APP called " LTE Discovery", you could download on your mobile and then check what 4G LTE band in your area.
Package included: 1*indoor AP + 1*outdoor 4g CPE +1*Power adapter + 1 pack accessory, No cable. The unit can only support 12-18V power input. Pls make sure use our power adapter. If you use 24V or 48V POE switch/Power adapter, the router would be burned..

Check Stock

Ueevii 5.8G Point to Point Wireless Bridge CPE451&2 * 1-Pack Wireless Bridge Bracket Mount 360°Adjustment

... bottom wireless driver is deeply optimized, with stronger anti-interference ability and better stability..
360°adjustment: There are many small holes on the wireless bridge bracket plate, you can adjust it for 360°, which can easily meet your installation needs at any angle.
CPE451 point to point bridge adopts low power consumption, high-performance design, radio frequency index and radiation index are in full compliance with national standards. It supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD) to reduce equipment energy consumption..

Check Stock

Gigabit Wireless Bridge, KuWFi 1200Mbps WiFi Bridge Point to Point Outdoor, 2.4&5.8G Long Range WiFi Bridge CPE with Panel Antenna Up to 5KM with 48V PoE Power[2-Pack]

ABS weather-proof case - High Power Outdoor Gigabit WiFi Bridge CPE2200 with ABS waterproof, dust proof and sunscreen shell, avoid the damage from dust, rainy weather. Meantime, it adaptive to various environment, the working temperature can be at -40℃ to 55℃. Suit for any country.
High Power, High Gain Antenna, more WiFi Range - Designed in two line Power Amplifier on PCB board, the power can be 500mW high power, build in dual band panel WiFi antenna, the PTP/PTMP WiFi range more than 5KM.
Power over Ethernet - Outdoor AP CPE2200 has integrated active Power over Ethernet (PoE), 10/100/1000Mbps WAN/LAN ports, for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure. Pls note, the default is 48V IEEE 802.3at PoE, 24V Passive PoE is possible by change PCB board.
Multiple Operation Mode - support wireless AP, WiFi Repeater operation mode, max to meet with different operation request.
With Access Control System under AP/WDS operation mode, easily access advanced network settings through PC, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore, Then work with Cloud Management....

Check Stock

CPE220 5.8G Wireless Bridge PTMP WiFi PTP Point to Point Access Outdoor Network CPE 2KM Transmission Distance with 12DBi High-Gain Antenna 2 LAN 100MBps Ethernet Port 24V PoE Adapter

...complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit, and wireless monitoring simple and professional..
PTMP Pre-programmed: Out of the box, connect the 2 wireless bridges and PoE adapters through the ethernet cable for power supply, and wait for 1 minute for the "Link" green indicator to light up to indicate that they have been automatically paired succeeded(Point to Point). Suitable to extend the internet to your garage, barn, warehouse, store via wireless transmission, instead of laying out the ethernet cable..
Using 5.8G / 300Mbps wireless transmission rate between wireless bridges can support 2KM transmission distance(Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote network WiFi access..
Extend the network to another building within 2KM through a point-to-point method. The master CPE receiver is connected to your internet through a PoE adapter, and the slave CPE transmitter is connected to the router(AP mode) or....

Check Stock