Top High Isolation Antenna Reviews

ZyXEL NWA3550-N

  • High powered Outdoor 3x3 Dual Band Dual Radio 802.11ac wireless access point to meet today and tomorrows Wireless access demands.
  • External N-Type Antenna Ports (Antennas Sold Separately).
  • ZyXEL APFlex zero touch AP mode changing and Auto IP Configuration makes easier to install and deploy.
  • Weather Hardened Housing for outdoor deployments..
  • Wireless Layer-2 Isolation to keep private and guest networks separate.
Check Stock

Antronix CMC2003H-A 3-Way Horizontal Splitter -3.5dB -7dB 5-1002 MHz High Performance for Coax Cable TV & Internet

  • 【Multi purpose】This digital Coax Splitter is designed for use with HD TV signals, satellite TV, and high speed internet modems as well as cable TV, and cable box, or antenna into multiple outgoing signals.
  • 【Not signal loss】:Perfect reception signal,high shielding structure for better anti-interference performance. Effective lowers digital noise and improves signal quality, reducing packet loss for other Devices.
  • 【 Product features】: low insertion loss, high isolation, high shielding, 2.4 Ghz 5-2400 MHz bidirectional network products. Zinc alloy die-casting, nickel-plated surface treatment, durable.
  • 【2 Outputs】Convenient and cost-effective 2-pack coax splitter 2 way provides spare or replacement units to use on different devices, including a MoCA adapter..
  • 【Gold plated connectors】Gold plated Material MoCA splitter ensures a corrosion free connection and increases durability for the antenna splitter and compatible with RG59 and RG6 coax cable.
Check Stock

WEVZENEY 4-Way Coaxial Cable Splitter, 2.4 Ghz 5-2400 MHz, Works with STB TV, Satellite, High Speed Internet, Antenna and MoCA Network, Gold Plated Connectors, Corrosion Resistan,2-Pack

  • 【Multi purpose】This digital Coax Splitter is designed for use with HD TV signals, satellite TV, and high speed internet modems as well as cable TV, and cable box, or antenna into multiple outgoing signals.
  • 【Not signal loss】:Perfect reception signal,high shielding structure for better anti-interference performance. Effective lowers digital noise and improves signal quality, reducing packet loss for other Devices.
  • 【 Product features】: low insertion loss, high isolation, high shielding, 2.4 Ghz 5-2400 MHz bidirectional network products. Zinc alloy die-casting, nickel-plated surface treatment, durable.
  • 【4 Outputs】Convenient and cost-effective 2-pack coax splitter 4 way provides spare or replacement units to use on different devices, including a MoCA adapter..
  • 【Gold plated connectors】Gold plated Material MoCA splitter ensures a corrosion free connection and increases durability for the antenna splitter and compatible with RG59 and RG6 coax cable.
Check Stock

ANTOP ANTENNA 43222-31244 Coaxial Cable Splitter for Satellite TV Antenna Signals 2GHz- 5-2050MHz 4-Way

  • Splits a coaxial cable signal source (cable/satellite/antenna) to four destinations.
  • 5-2050MHz (2GHz) frequency range for compatibility with all digital ready RF signals.
  • Low insertion loss, high return loss and isolation for better performance on TV and satellite signal.
  • Precision zinc die-cast with 18K gold-plated chassis for maximum signal transfer and corrosion resistance.
  • High shielding structure for lower digital noise and higher signal quality.
Check Stock

3 Way Bi-Directional 5-2300 MHz Coaxial Antenna Splitter for RG6 RG59 Coax Cable Satellite HDTV (3 Ports)

  • Splits a coaxial cable signal source (cable/satellite/antenna) to three destinations.
  • Low insertion loss, high return loss and isolation for better performance on TV and satellite signal.
  • Precision zinc die-cast with 18K gold-plated chassis for maximum signal transfer and corrosion resistance.
  • 5-2050MHz (2GHz) frequency range for compatibility with all digital ready RF signals.
  • High shielding structure for lower digital noise and higher signal quality.
Check Stock

Philmore Deluxe High Isolation 2-Way Coaxial A/B Switch Fully Shielded with Zinc Die Cast Inner Case

  • Selects 75 OHM video devices for viewing on TV set..
  • Zinc die cast inner case offers complete internal protection..
  • Fully shielded with low conductivity gaskets to eliminate interference between signals - No bleeding - no station interference - no picture loss..
  • Eliminates interference between signals because of a high isolation of 950-890mHz...
Check Stock

3 Way TV Signal Splitter,ANTOP Digital Coax Cable Splitter 2GHz- 5-2050MHz High Performance for Satellite/Cable TV Antenna

  • Splits a coaxial cable signal source (cable/satellite/antenna) to three destinations.
  • Low insertion loss, high return loss and isolation for better performance on TV and satellite signal.
  • Precision zinc die-cast with 18K gold-plated chassis for maximum signal transfer and corrosion resistance.
  • 5-2050MHz (2GHz) frequency range for compatibility with all digital ready RF signals.
  • High shielding structure for lower digital noise and higher signal quality.
Check Stock

Ebtech Hum Eliminator

  • Uses 1:1 isolation transformers to break loop antenna and balance audio lines.
  • Also converts balanced and unbalanced signals and cable types.
  • 1/4" smart jacks can accept any combination of mono or stereo plugs.
  • Cold-rolled steel housing. Two Year warranty..
Check Stock

Daiwa CS-201A 2 Position Coax Switch

  • DC ~ 600MHz 2 Position Antenna, Coax Switch, Power: 2.5 kW PEP, 1kW CW, VSWR: Below .12, Insertion Loss: Less than 0.2 dB, Isolation: 60dB 600 MHz, Connetcor: SO-239, Output Port:2..
Check Stock

Ebtech HE-2-XLR Hum Eliminator 2-Channel Box with XLR Jacks

  • Simply plug between the offending pieces of equipment to eliminate hum.
  • Uses 1:1 isolation transformers to break loop antenna and balance audio lines.
  • Also converts balanced and unbalanced signals.
Check Stock

ANTOP ANTENNA 8541719146 8 Way TV Signal Splitter,ANTOP Digital Coax Cable Splitter 2GHz- 5-2050MHz High Performance for Satellite/Cable TV Antenna

  • Low insertion loss, high return loss and isolation for better performance on TV and satellite signal.
  • Splits a coaxial cable signal source (cabletellite/antenna) to two destinations.
  • 5-2050MHz (2GHz) frequency range for compatibility with all digital ready RF signals.
  • Precision zinc die-cast with 18K gold-plated chassis for maximum signal transfer and corrosion resistance.
  • High shielding structure for lower digital noise and higher signal quality.
Check Stock

ANTOP ANTENNA 43235-116317 2 Way TV Signal Splitter,ANTOP Digital Coax Cable Splitter 2GHz- 5-2050MHz High Performance for Satellite/Cable TV Antenna

  • Splits a coaxial cable signal source (cable/satellite/antenna) to three destinations.
  • Low insertion loss, high return loss and isolation for better performance on TV and satellite signal.
  • Precision zinc die-cast with 18K gold-plated chassis for maximum signal transfer and corrosion resistance.
  • 5-2050MHz (2GHz) frequency range for compatibility with all digital ready RF signals.
  • High shielding structure for lower digital noise and higher signal quality.
Check Stock

ANTOP 3 Way Antenna Coaxial Splitter, TV Signal Splitter 2GHz- 5-2050MHz - Low-Loss RF Splitter for TV and Satellite AT-706

  • Low insertion loss, high return loss and isolation for better performance on TV and satellite signal. High shielding structure for lower digital noise and higher signal quality..
  • Splits a coaxial cable signal source (cable/satellite/antenna) to three destinations..
  • 5-2050MHz (2GHz) frequency range for compatibility with all digital ready RF signals..
  • Precision zinc die-cast with nickel plating chassis for maximum signal transfer and corrosion resistance..
  • AT-706 can be connected in reverse to become a Combiner, 3 in 1 out..
Check Stock