Top High Heat Resistance Reviews

5 Rolls 20mm x33m(108ft) Heat Tape High Temperature Heat Resistant Tape Heat Transfer Tape Thermal Tape Sublimation Tape Heat Vinyl Press Tape Up to 260℃(500℉) for Soldering Circuit Board, No Residue

[HIGH-TEMPERATURE RESISTANT] - Our heat resistant tapes for sublimation are polyimide film tapes provide heat resistance up to 260℃, reliability and durability, Heat resistance: short period heat resistance: 260℃(500℉).
long period heat resistance: 220℃（428°F）.
[REASONABLE SIZE] - The heat resistant tape is 20mm/0.8 inches in width and 33m /108ft in length per roll. Not too wide nor too narrow. Long enough heat press tape can meet daily needs in different situations, such as keep your design in place when you making shirts and hats,help to do heat transfer vinyl on a heat press.
[WIDELY USED] - The heat tape for heat press is not only suitable for sublimation on cups and heat transfer vinyl, but also for protecting electrical wires,electric motor,soldering, 3D printing, PCB boards, electrical insulation, high-temperature powder coating and other DIY projects.
[STRONG ADHESIVE] - The heat transfer tapes are made of polyimide film with silicone adhesive, it is easy to stick, not easy to break while peeling and leaves no residue after peel away. Works well in coffee mug press, heat press, T shirt application or other thermal transfer printing.
[MEET YOUR NEED] - Package includes 5 rolls heat press tapes. ★ If you have any questions about the ....

Check Stock

DEWALT DW3987 10TPI Portable Band Saw Blade - 44-7/8-Inch, .025-Inch (3-Pack)

Matrix II High Speed Steel Edge for Heat and Wear Resistance.
8% Cobalt Content For Added Durability & Wear.
Rc 65-67 Tooth Hardness For Increased Wear Resistance.
Alloy Steel Backer for Fatigue Resistance.
Matrix II high speed steel edge for heat and wear resistance.
8 percent cobalt content for added durability and wear.
Rc 65-67 tooth hardness for increased wear resistance.
Alloy steel backer for fatigue resistance.

Check Stock

DEWALT DW3992 14/18TPI Portable Band Saw Blade - 44-7/8-Inch, .025-Inch (3-Pack)

Matrix II High Speed Steel Edge for Heat and Wear Resistance.
8% Cobalt Content For Added Durability & Wear.
Rc 65-67 Tooth Hardness For Increased Wear Resistance.
Alloy Steel Backer for Fatigue Resistance.
Matrix II high speed steel edge for heat and wear resistance.
8 percent cobalt content for added durability and wear.
Rc 65-67 tooth hardness for increased wear resistance.
Alloy steel backer for fatigue resistance.

Check Stock

Outdoor Grill Floor Mats for Gas Grill Protective Barbecue Mat Terrace Fireproof Mat 80x60cm Fireproof Mat Fireplace Lawn Tools & Home Improvement

Reminder: Do Not Put The Heat Source Directly On The Fire Table, There Must Be At Least A Certain Amount Of Space Between The Fire Table And The Heat Source..
High Temperature Resistance: High Temperature Resistance Up To 500°F, Which Can Reflect Up To 95% Of Heat..
Deck Protector: Eliminates Burns And Fire Risks On Decks, Decks Or Lawns.
High Quality: Made Of Glass Fiber Cloth, High Temperature Resistance And Tear Resistance.
Suitable For Outdoor Lawn Terrace Barbecue.

Check Stock

Dahszhi Wirewound Resistors 25W 3 Ohm Aluminum Resistors - 5pcs

Package Content: 5pcs x Aluminum Resistor.
Stable performance, extensive resistance, small size, high temperature resistance and high ultimate voltage..
Aluminum housing for heat dissipation, suitable for cooling plate installation, can be used in atrocious environment..
Aluminum case has the screw tabs on it so you can tighten them against a chassis or heat sink for greater heat dissipation..

Check Stock

R.W.FLAME Electric Patio Heater, Electric Infrared Heater, Indoor/Outdoor Patio Heater, Waterproof, 750W and 1500W…

High Heat Efficiency: High speed heating. Golden tube and high-rated aluminum reflector heating system provide quick & instant heating. Fit for home, courtyard, garages, open-air restaurant, outdoor and indoor demands. AC120V,60Hz.
Easy Operating & Assembly: Adjustable height of standing pole with the stainless steel. With adjustable heating head, this infrared heater fits all the heating demands. Very easy to assemble, only partial assembling is needed..
Safety & Resistance: ETL Certificated. IP65 rated provides high water and dusty resistance. Golden tube has the advantage of wear-resistance, high temperature-resistance, corrosion resistance. Adapting with mechanical rocker switch & explosion-proof net..
Energy Saving & Environmental Protection: Infrared heater provide the thermal efficiency softly, prevent the body from UV radiation. Saving 30%-40% energy compared with ordinary heating ways. No Gas or other flammable fuel is required, totally environmental protection..
2 heating modes:1 settings for desired comfort-High Heat (1500 watt), Low Heat (750 watt). You can choose the comfortable temperature by controlling the remote.

Check Stock

DEWALT Portable Band Saw Blade, 44-7/8-Inch, .020-Inch, 24 TPI, 3-Pack (DW3984)

Matrix II high speed steel edge of the band saw blade is designed for heat and wear resistance.
8% Cobalt Content For Added Durability & Wear.
Rc 65-67 Tooth Hardness For Increased Wear Resistance.
Alloy Steel Backer for Fatigue Resistance.
Matrix II High speed steel edge for heat and wear resistance.
8 percent Cobalt Content For Added Durability.

Check Stock

Fielect Carbon Fiber Strip Bars 1x3x200mm Length Pultruded Flat Carbon Fiber Bar Strips for Kites，RC Airplane 5 Pcs

[High Material]- This carbon fiber strip is made of carbon fiber with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance and high strength..
[Advantages]- This carbon fiber strip is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments..
[Application]- Pultruded carbon fiber strip bar is suitable for racing drones, RC helicopter wing, RC airplanes and RC sailboats, kite spars..

Check Stock

Fielect Carbon Fiber Strip Bars 2x19x200mm Length Pultruded Flat Carbon Fiber Bar Strips for Kites，RC Airplane 1 Pcs

[High Material]- This carbon fiber strip is made of carbon fiber with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance and high strength..
[Advantages]- This carbon fiber strip is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments..
[Application]- Pultruded carbon fiber strip bar is suitable for racing drones, RC helicopter wing, RC airplanes and RC sailboats, kite spars..

Check Stock

Delisert Self Tapping Threaded Insert Type 307 Carbon Steel M16X2X14mm 100PCS

Heat and Corrosion Resistance: The thread inserts provide strong internal thread which resist heat and corrosion when installed.
High Performance: The thread inserts can increase connection strength and fatigue resistance due to their elasticity.
Anti vibration: These thread inserts have strong resistance to vibration, which can prevent loosening.
Strong pull resistance: Large contact area with the finished product, strong pull resistance.
They are easy and quick to install - only need one assembly tool.
Intimate After-Sales Service: Please feel free to contact us by e-mail if you have any issue about the item.
We will try our best to give you a satisfactory reply within 24 hours.

Check Stock

Permatex 82099 Spray Sealant, 12 oz.

J-B Weld Exhaustweld: A High Strength Fiberglass Wrap, Impregnated With A Specially Formulated Resin For High Temperature Resistant Repairs. Exhaustweld Can Resist Up To 1100°F Once It Is Fully Cured.
Cure And Set Time: Exhaustweld Can Cure With Or Without Heat! It Will Cure Within 20 Minutes If Heat Is Applied To It With Either A Heat Gun Or By Letting The Engine Run. Without Heat, Exhaustweld Will Set In 20 Minutes And Cure In 2 Hours.
High Heat Resistance: Once Fully Cured, J-B Weld Exhaustweld Exhaust System Repair Wrap Has A Temperature Resistance Of 1100°F, Allowing It To Be Used On Every Part Of The Exhaust System.
Applications: Manifolds, Catalytic Converters, Mufflers, Tailpipes And More.

Check Stock

Superfastracing 2 Roll 2 50 Feet Lava Titanium Basalt Exhaust Heat Wrap Roll for Motorcycle Manifold Header Pipe Heat Wrap Tape with Stainless Ties

【Universal】-Perfect Fitment for any Automotive or Motorcycle application parts.
【Package Include】- Two Roll 2 inch X 50 feet Heat Wrap With 20 stainless steel zip ties,(Gloves are not included, for which we are sorry).
【Excellent Material】-Made from high quality Lava Rock (aka Basalt), Extruded Into Fiber Material.Not easy to fade.
【Excellent Heat Resistance】-To withstand continuous high temperature up to 1652°F.In addition, high wear resistance, oil leakage resistance, and....
【Improve Performance】-The exhaust heat wrap tape Reduces Heat Under Hood Up to 50%-70%,Reduces temperature & vibration breakdown.

Check Stock

High Temperature Tape Heat Tape Heat Resistant Tape Heat Transfer Tape Heat Tape for Sublimation No Residue 10mm X 33m 108ft (Yellow-2 Roll)

Heat Tape perfect for protecting sensitive printed circuit board (PCB) components such as gold fingers when wave soldering.
Heat Resistant Tape extensive use as heat tape for transformer, motor, coil, capacitor and frequency conversion power supply in electronic industry.
Heat transfer tape for vinyl.This heat transfer tape keep your design in place when you making shirts and hats,help to do heat transfer vinyl on a heat press.
High Temp Tape Size: Width: about 10mm/0.39in.
Length: about 33m /108ft. Heat resistance: Short period Heat Resistance:260℃（500°F）Long period Heat Resistance:220℃（428°F）.
Heat Tape Color: mainly tawny,No residue.

Check Stock