Top High Clearance Jack Reviews

Cooler Master MasterBox NR400 Micro-ATX Tower with Front Mesh Ventilation, Minimal Design, Tempered Glass Side Panel and Single Headset Jack

Minimalistic mesh design: Elegant design elements are applied to mesh for optimal thermal performance.
Optimal thermal performance, the full mesh front panel and ventilated top panel provide a high potential for thermal performance.
Flush Tempered glass Side panel design:The tempered glass Side panel, fastened by thumbscrews on the rear panel, keeps the surface flush and unobstructed.
Graphics Card support up to 346 millimeter: Generous clearance space is provided to support the latest graphics cards.
With/without ODD support, depending on preference, an odd version of the chassis is available.
If an odd is not preferred, a cleaner appearance and more cooling options on the top and front panels are supported.
Headset jack the single 4 pole headset jack features both Audio and microphone capabilities simultaneously so that separate jacks are not needed.
Cable management high quality rubber grommets are paired with 22 millimeter of clearance behind the motherboard TO offer ample room for cable management.

Check Stock

BESTOOL Jack Stands 4 ton Jack Stand with Security Locking Pins, 8,000 lbs Capacity, 1 Pair, Black

BESTOOL jack stands uniquely designed circular base pads flat top rubber saddle protects the car frame better than the traditional curved axle post jacks stands. Provide maximum stability and safety, non-slip pad can be disassembled, replaced..
This car jack stand features mobility pin height adjustment mechanism provides 7 adjustable positions. Making it flexible for all of your needs and provides added security..
The rubber circular base pad protects against scratching paint. Stand has a powder coated finish to prevent rusting.The minimum height of this jack is 13.4 inches and the maximum height is 19.9 inches with a 4 ton (8,000 lb) load capacity..
Jack stands 4 ton constructed of high-grade forged steel with a welded frame design for durability.Wide pyramid foot base provides added strength and stable support..
This jack stand is perfect for modern low ground clearance cars. it handles a wide range of vehicles including small cars, SUVs, and light duty trucks, jeeps, ATV's, UTV's, and more..

Check Stock

Jack Boss 3 ton Hydraulic Aluminum car Floor Jack,6600 lbs Capacity,Low Profile Lightweight Quick Lift Trolley Jack with Dual Piston

[Capacity]Aluminum and steel floor jack can lift up to 3 tons 6600 lbs with a lifting range height of 3-15/16" min to 18-5/16" max.Dimensions:28.3" L x 13.7"W x 7.8"H.Floor jack is used for most Sedans,SUV,MPV,travel trailer,station wagon,mini bus.Package contains rubber saddle and two piece handle.
[Low Profile]The high performance floor jack with low profile design of 3-15/16" min.lifting height allow you to get underneath a low vehicle,suitable for low ground clearance vehicle.
[Quick lifting]Heavy duty jack with dual piston enable you to easily pump the jack to the desired height.Large rubber saddle also help protect your vehicle.
[Durable Material and Easy Operation]Floor jack constructed of aluminum billet and welded steel frame assures high strength and duablility. Steel casters and swivel front casters for easy maneuverability, sturdy handle for convinient carrying.
[Safety and After-sales]Our floor jacks are professionally tested to fully ensure the safety of each user and can be used at ease.Meets ANSI/ASME PASE safety standards.Includes a limited 1 year manufacturer warranty.If you have any questions, please feel free to contact us,we will be the first time to solve for you.

Check Stock

CURT 28112 Marine Boat Trailer Jack with 6-Inch Wheel 1,200 lbs 11 Inches Vertical Travel

DEPENDABLE STRENGTH. This boat trailer jack is rated to support up to 1,200 lbs. trailer tongue weight, and it comes with bolt-on mounting hardware to....
CONVENIENT MOBILITY. For easier coupling and positioning of your boat trailer, this jack comes with a 6-inch diameter trailer jack wheel.
EASY OPERATION. This trailer tongue jack allows for 11 inches of vertical movement and operates using a side-wind handle (12-1/2-inch retracted....
SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up....
CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this marine boat trailer jack is protected in a....

Check Stock

Arcan 2 Ton Extra Long Reach Low Profile Steel Floor Jack A20016 / XL2T Black

LIFT RANGE Provides the lowest low height (2 75”) and the highest high height (24”) compared to the average jack.
LOW PROFILE FRAME For easy access under low ground clearance vehicles.
DUAL PUMP PISTONS Quickly raises the floor jack saddle to load.

Check Stock

FEANISIFEI Electric Car Jack Kit 3 Ton 12V Electric Car Jack with Impact Wrench Electric Jack for Car SUV Car Emergency Repair Kit

ALL-IN-ONE KIT: This electric jack kit comes in an electric car jack which has a 3-ton capacity and a lift range from 5.5 to 16.5 inches, which means it is able fit under cars that have less than 6" of ground clearance . The kit it also includes a high-speed wrench for quick removal of your car’s lug nuts..
HEAVY-DUTY & SAFE :The electric jack is made out of high-grade steel and coated for corrosion resistance. By the way, this electric scissor jack has a large footprint, which provides a sturdier platform to raise your car..
BEST CHOICE FOR TIRE CHANGES: If you're not a fan of crawling on the ground to change a tire, then this electric jack kit for car is going to be an ideal choice for you. When it comes to roadside emergencies, a portable electric jack is a good choice..
POWERED BY TWO WAYS: Not only can you plug this car jack electric into the cigarette lighter in your car, but it can also use the battery power directly. Plus, the jack comes with extra fuses, so if your car can't handle the power demands, you're not left with a blown fuse..

Check Stock

BAOSHISHAN 6 Ton Double Ram Bottle Jack 6-1/4\ to 15-3/4\ Lifting Range Hydraulic Welded Bottle Jack Car Jack

[DOUBLE RAM] - The double-ram design plus extension screw top means you have 3 stages of lifting stroke, which has a better range of motion than a traditional single ram 6 ton bottle jack..
[BETTER RANGE OF MOTION] - The 6-1/4" starting height allows stubby bottle jack to fit most car clearance, and it has a double ram design with extension screw, which would fully extend up to 15-3/4"..
[SAFETY VAVLUE] - Each jack is tested for safety. The secure valve will automatically protect jack hydraulic system when overload. Equipped with a high-quality, glide-action pressure pump which is designed to lift with min effort..
[SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 6 ton jack. It allows the hydraulic jack to be adjusted to accommodate desired work height while X-shaped top adds versatility. Thickened steel base increases stability and strength..
[PARAMETER] - Rated capacity: 6 ton (12,000 lbs) | Max height: 400mm/15.75" | Min height: 160mm/6.30" | Total lift: 9.45" | Adjustable height: 60mm/2.36" (extension screw top) | Net Weight: 4.9kg/10.8lbs.
[WARRANTY] - BAOSHISHAN provides ONE-year Warranty for the double ram jack. If there is any oil leakage, damage or malfunction of the bottle jacks, please do not hesitate to contact the after-....

Check Stock

BAOSHISHAN 4 Ton Bottle Jack Double Ram 6-1/4\ to 15-3/8\ Lifting Range Hydraulic Jack Car Jack Portable with Carrying Case

[DOUBLE RAM] - The double-ram design plus extension screw top means you have 3 stages of lifting stroke, which has a better range of motion than a traditional single ram 4 ton bottle jack..
[BETTER RANGE OF MOTION] - The 6-1/4" starting height allows stubby bottle jack to fit most car clearance, and it has a double ram design with extension screw, which would fully extend up to 15-3/8"..
[WITH CARRYING CASE] - The double ram bottle jack with case is easy enough to store away in the vehicle or garage. And the color of the compact box is random, BLACK or GRAY. If the box you received is damaged, please do not hesitate to contact after-sales service to replace it..
[SAFETY VAVLUE] - Each jack is tested for safety. The secure valve will automatically protect jack hydraulic system when overload. Equipped with a high-quality, glide-action pressure pump which is designed to lift with min effort..
[SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 4 ton jack. It allows the hydraulic jack to be adjusted to accommodate desired work height while X-shaped top adds versatility. Thickened steel base increases stability and strength..
[WARRANTY] - BAOSHISHAN provides ONE-year Warranty for the double ram jack. If there is any oil leakage, damage or ma....

Check Stock

CURT 28156 Marine Boat Trailer Jack with 6-Inch Wheels, 1,500 lbs. 10-3/8 Inches Vertical Travel

DEPENDABLE STRENGTH. This boat trailer jack is rated to support up to 1,500 lbs. trailer tongue weight, and it comes with bolt-on mounting hardware to readily attach to the trailer tongue.
CONVENIENT MOBILITY. For easier coupling and positioning of your boat trailer, this jack comes with dual 6-inch diameter trailer jack wheels.
EASY OPERATION. This trailer tongue jack allows for 10-3/8 inches of vertical movement and operates using a side-wind handle (12-5/8-inch retracted height, 23-inch extended height).
SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a heavy-duty pull pin to securely lock into place.
CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this marine boat trailer jack is protected in a durable zinc-plated finish.

Check Stock

ABN 5-½in Large Jack Pad Universal Fit Cross Slotted Frame Rail Protector

...has 5.5-inch (14cm) top diameter and 4-inch (10.2cm) bottom diameter, 1.75-inch height (4.4cm), 4 slots have approx. 0.4-inch width and 0.75-inch depth (1cm x 1.9cm).
To ensure fitment, measure ID of your jack and compare to 5.5-inch diameter of this jack rubber stabilizer pad while ensuring your vehicle has enough clearance – this jack stands pad adds 1 inch (2.5cm) to height.
PACKAGE CONTENTS: Stabilizing jack pads package includes (1) 5.5-inch pinch weld protector slotted jack pad to best suit your needs – Jack rubber pad only – jack not included.

Check Stock

BAOSHISHAN 3 Ton Bottle Jack Double Ram 6-1/2\ to 16-1/2\ Lifting Range Hydraulic Jack Car Jack Welded Bottle Jack Portable with Carrying Case

..., which has a better range of motion than a traditional single ram 3 ton bottle jack. You have almost TWICE the lifting height since the second tube does not start extending until the first one reaches its maximum height..
[BETTER RANGE OF MOTION] - The 6-1/2" starting height allows small bottle jack to fit most car clearance, and it has a double ram design with extension screw, which would fully extend up to 16-1/2"..
[WITH CARRYING CASE] - The double ram bottle jack with case is easy enough to store away in the vehicle or garage. And the color of the compact box is random, BLACK or GRAY. If the box you received is damaged, please do not hesitate to contact after-sales service to replace it..
[SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 3 ton jack. It allows the hydraulic jack to be adjusted to accommodate desired work height while X-shaped top adds versatility. Thickened steel base increases stability and strength..
[STURDY STRUCTURE] - Although the main bottle is only slightly larger than a 12oz soda can, and the overall weight is about 5.5 pounds, the compact bottle jack with high-quality alloy steel structure to ensure quality and durability. BAOSHISHAN provides ONE-year Warranty for the double ram jack..

Check Stock

OEMTOOLS 24835 Hydraulic Floor Jack, 2.5 Ton Low Profile Automotive Jack, Quick Vehicle Lift Up to 14 Inches, Portable Hydraulic Lift, Fits Under Nearly Any Vehicle

HYDRAULIC CAR LIFT: The hydraulic jack is designed to lift 2.5 ton vehicles with minimal effort when performing services or maintenance work.
Hydraulic jack lift is built for performance and ease of use.
Valuable shop floor jack or garage floor jack.
LOW PROFILE FLOOR JACK: Our low profile car jack makes working with low-clearance vehicles much easier, getting under vehicles that standard hydraulic car jacks cannot fit.
These low profile floor jacks have a maximum lifting height of 14 inches.
SAFE TO USE: These floor jacks for cars, trucks, SUVs, and many other vehicles feature an overload system that prevents use beyond the rated capacity of 2.5 tons.
2.5 ton floor jack can safely fit under and lift nearly any vehicle within its capacity.
PORTABLE CAR JACK: This car lifter jack comes with floor jack casters for convenient portability.
Heavy duty floor jack features (2) 360 degree rear swivel casters for easy maneuvering.
Easily transport this portable car lift around your garage.
PRODUCT SPECIFICATIONS: (1) Vehicle Hydraulic Jack.
(2) 360 Degree Rear Swivel Casters and (2) Large Front Casters.

Check Stock

Pro Series A-Frame Round Trailer Jack 5000 lbs 15 Lift W/Footplate & 6 Wheel

2 1/4" Diameter jack , Travel 15in, Retracted 10.8.
Extended 25.8" Clearance 14.55" Capacity 5K Lbs.

Check Stock