Top High Accuracy Molding Reviews

DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)

POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.

Check Stock

GemRed 82305 Digital Angle Finder Protractor Stainless Steel 7inch/200mm Black Button

【Patented measuring technology】Ruler and protractor combination for easy measuring inside and outside angles. 【Digital Display】Easy to read..
【Durable Rulers】Well-made stainless steel rulers and laser etched measurements offer clear reading and years' usage..
【High Accuracy】Accuracy of this protractor is ±0.3 degree. It is a good choice for most projects like woodworking, crown molding and daily use. Folded length: about 7.5 inch/220mm.Total length 400mm..
【Locking Function】For read it easily, GemRed angle finder could be locked at any angle. *NO REVERSE ANGLE/DISPLAY FUNCTION..
【Battery】CR2032 battery. Package contains battery..

Check Stock

ZL-166 Handheld GPS Navigation Track Land Area Measure Calculation Meter TFT 2.4in Display Measuring Tool 100-240V

LED BACKLIGHT DISPLAY: Handheld GPS navigator has high definition LED backlight display, with laser module, can easily measure and read even in dark environment.
COMFORTABLE GRIP: Land area measurer adopts insulating rubber, cushioning and anti-skid, double-layer protection, the design conforms to ergonomics, comfortable grip, and more convenient measurement.
HIGH ACCURACY: Land navigation land area meter equipped for u-blox chip, with GPS positioning system, accurate measurement, small error, supports data export function, with voice broadcast, without looking at the screen to know the measurement results.
WATERPROOF: GPS land area meter has good waterproof and dustproof performance, IP class waterproof, easy to use even in harsh working environment, no need to worry about water and dust problems.
GOOD DURABILITY: GPS navigator adopts two color mold is one-piece molding, sturdy and durable, double injection molding shell, made of high-quality ABS material, corrosion-resistant and wear-resistant.

Check Stock

ALVIN ALT24 Aluminum Graduated T Square, Drawing and Design Tool for Students and Professionals, Great for Carpentry, Drafting, Architecture, Engineering, and Art - 24 Inches

A professional's choice - alvin has been the professional's choice for drafting tools and drawing supplies for over half a century. since 1950, we have brought quality and value to our customers..
Grade a materials - the blade is made of grade a aluminum and is 1.5 inches wide and 1.6mm thick and you'll feel safe knowing that the head molding will be tough. 24 inches in length..
Graduated with 16th on both side - you won't have a hard time with measuring any side or angle..
Made for accuracy and longevity - your measurement will be accurate and the instrument made to last..
High contrast visibility - the 1/16ths white on the head molding will make the numbers visible to anyone who uses it..

Check Stock

Windshield A-Pillar Molding Trim Kit Driver Front Outer Side | Compatible with 2011-2019 Ford Explorer | Replaces 926-450, BB5Z7803137AA, BB5Z7803145AA

【Easy Installation】This replacement A pillar molding outside trim set is manufactured to the OE specification to provide factory appearance and direct-fit, just takes 15 minutes to replace the old windshield trim..
【Premium Quality】Long life-span matters, that is why our window trim molding is builted to strict ABS quality control standards, ensures the accuracy of size matching, and durable..
【Fit For】2011-2019 Ford Explorer. The front left side windshield trim has went through vehicle try-on testing, means you will get a fairly reliable auto trim. Our windshield trim molding works just like OEM, half the price..
【Replace OE NUMBER】926 450, BB5Z7803137AA, BB5Z-7803137-AB, BB5Z7803137BA, BB5Z7803145AA. It comes in two assemblies, the outer part and the inner part which is the bracket that attaches to the vehicle..
【24-Month Warranty】If for any reason at all, you are not satisfied with the Ford Explorer driver side windshield trim molding, you can contact us through amazon message to apply the service of carefree REPLACEMENT or REFUND..

Check Stock

Windshield A-Pillar Molding Trim Kit Passenger Front Outer Side | Compatible with 2011-2019 Ford Explorer | Replaces 926-451, BB5Z7803136AA, BB5Z7803144AA

【Easy Installation】This replacement A pillar molding outside trim set is manufactured to the OE specification to provide factory appearance and direct-fit, just takes 15 minutes to replace the old windshield trim..
【Premium Quality】Long life-span matters, that is why our window trim molding is builted to strict ABS quality control standards, ensures the accuracy of size matching, and durable..
【Fit For】2011-2019 Ford Explorer. The front right side windshield trim has went through vehicle try-on testing, means you will get a fairly reliable auto trim. Our windshield trim molding works just like OEM, half the price..
【Replace OE NUMBER】926 451, BB5Z-7803136-AA, BB5Z7803136AB, BB5Z7803136BA, BB5Z7803144AA. It comes in two assemblies, the outer part and the inner part which is the bracket that attaches to the vehicle..
【24-Month Warranty】If for any reason at all, you are not satisfied with the Ford Explorer passenger side windshield trim molding, you can contact us through amazon message to apply the service of carefree REPLACEMENT or REFUND..

Check Stock

DEWALT 12-Inch Sliding Compound Miter Saw, Double Bevel (DWS780) , Black

Integrated CUTLINE Blade Positioning System provides adjustment free cut line indication for better accuracy and visibility for the 12-inch miter saw blade.
XPS technology uses an LED to project light down either side of the blade, creating a shadow on the cutline once the saw arm is lowered.
Super-efficient dust collection system of DEWALT miter saw captures over 75% of dust generated.
Tall sliding fences support crown molding up to 7-1/2-inch nested and base molding up to 6-3/4-inch vertically against the fence while easily sliding out of the way for bevel cuts.
Exclusive back fence design cuts up to 2x14 dimensional lumber at 90 degree and 2x10 at 45 degree.

Check Stock

Gledewen Windshield A-Pillar Molding Front Outer Trim Inner W/Side Tape Compatible with 2011-2019 Ford Explorer Replaces #BB5Z7803137AB,BB5Z7803136AA, Left + Right

【Easy Installation】This replacement A-pillar molding outside trim set is manufactured to the OE specification to provide factory appearance and direct-fit, just takes 15 minutes to replace the old windshield trim..
【Premium Quality】Long life-span matters, that is why our window trim molding is builted to strict ABS quality control standards, ensures the accuracy of size matching, and durable..
【Fit For】2011-2019 Ford Explorer. The Ford Explorer windshield trim has went through vehicle try-on testing, means you will get a fairly reliable auto trim. Our windshield trim molding works just like OEM, half the price..
【Replace OE NUMBER】Driver Side: 926-450, BB5Z7803137AA, BB5Z-7803137-AB, BB5Z7803137BA, BB5Z7803145AA.
Passenger Side: 926-451, BB5Z-7803136-AA, BB5Z7803136AB, BB5Z7803136BA, BB5Z7803144AA..
【24-Month Warranty】If for any reason at all, you are not satisfied with the Ford Explorer windshield trim molding, you can contact us through amazon message to apply the service of carefree REPLACEMENT or REFUND..

Check Stock

DEWALT 12-Inch Miter Saw, 15-Amp, Single Bevel, Compound (DWS715) & Miter Saw Stand, Compact (DWX724)

Product 1: Power and Durability: 15 Amp, 4,000 Rpm Motor.
Product 1: Miter Detent Plate Improves Productivity and Ensures Cutting Accuracy: Adjustable Stainless Steel Miter Detent Plate with 14 Positive Stops.
Product 1: Miter Dentent Override That Allows You to Override the Miter Stops and Adjust to the Desired Setting Without the Saw Slipping into the Miter Detents. Arbor Size Is 5/8 Inches.
Product 1: TALL SLIDING FENCES that support crown molding up to 5 1/4 Inch nested and base molding up to 6 1/2 Inch vertically against the fence while easily sliding out of the way for bevel cuts.
Product 2: Universal design works with all brands of miter saws.

Check Stock

Seymour STR-662 1\ STA-LOK Repair Kit

Easy to use,convenient to operate,saves effort and time in use..
Using thread insert to convert mm---inch screw hole, it is convenient and fast..
The steel wire screw sleeve is assembled in the screw hole of aluminum alloy and other materials, which can form standard internal thread with high strength, wear resistance and high accuracy..
When there is thread machining error or repair of damaged internal thread hole, using steel wire screw sleeve as repair means, it can be used to repair the thread hole economically and effectively.You can also use the same screw after repair..
Typical applications: high-voltage switchgear, microwave communication, auto parts, air separation equipment, radiator, etc.
Parts thread hole repair, such as injection molding machine template thread hole repair.
Imported equipment or machinery thread dam.

Check Stock

MulWark 26ft Measuring Tape Measure by Imperial Inch Metric Scale with Both-Side Metal Blade,Magnetic Tip Hook and Shock Absorbent Case-for Construction,Contractor,Carpenter,Architect,Woodworking

【Patented measuring technology】Ruler and protractor combination for easy measuring inside and outside angles. 【Digital Display】Easy to read..
【Durable Rulers】Well-made stainless steel rulers and laser etched measurements offer clear reading and years' usage..
【High Accuracy】Accuracy of this protractor is ±0.3 degree. It is a good choice for most projects like woodworking, crown molding and daily use. Folded length: about 7.5 inch/220mm.Total length 400mm..
【Locking Function】For read it easily, GemRed angle finder could be locked at any angle. *NO REVERSE ANGLE/DISPLAY FUNCTION..
【Battery】CR2032 battery. Package contains battery..

Check Stock

ZXMOTO K0208RED ABS Motorcycle Bodywork Fairing Kit for Kawasaki NINJA 250R EX250 2008 2009 2010 2011 2012 Red - (Pieces/kit: 15)

Fairing Kit fits: Kawasaki NINJA 250R EX250 2008 2009 2010 2011 2012.
ABS Injection Molded, hole-in-one molding, Installation accuracy is higher than 98%.
high grade ABS plastic,Good elasticity and heat tolerance, not easy to be cracked .heat-shield technology adopted.

Check Stock

Xuesong Digital Angle Finder Protractor, 2 in 1 Digital Level and Angle Gauge, 7 Inch / 200mm Stainless Steel Measuring Ruler with Large LCD Display for Woodworking, Crown Molding and Daily Use

2-in-1 electronic digital protractor ruler for measuring lengths and angles, both internal and external. Made with high quality stainless steel and with durable etched measurements..
【Digital Display】Large LCD Display easy to read..
【High Accuracy】 Measuring Range: 0~999.9°.
Accuracy ±0.3°, 360-degree measurement of internal and reverse angles. It is a good choice for most projects like woodworking, crown molding and daily use..
【Button Function】Short press ON/OFF to turn on 2 in 1. short press ON/OFF to shut off the LCD. Long press ON/OFF for more thane 3 seconds to shut off the whole system. *NO REVERSE ANGLE/DISPLAY FUNCTION..
With hold function to store measured angle in memory and zeroing button to reset angle finder tool at any time. Automatic power off after 5 minutes. Clear operating instructions provided on the package..

Check Stock