Top Hidden Fastener Decking Reviews

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (50-Pack)

▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..

Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (100-Pack)

▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..

Check Stock

DeckWise (Black) Ipe Clip EXTREMEKD Hidden Deck Fasteners, 1/4' Spacing, Stainless Steel Black #8x2' Trim-Head Screws for 600 Sq. Ft. of KD Hardwood, Thermal or Composite Decks (1050 Bucket)

Kit includes 1050 BLACK hidden deck clips, 1140 #8×2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
1050 count kits will fasten 600 Sq. Ft. of decking (16″ on Center).
Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
Spacer leg automatically sets the gap between boards for consistent spacing.

Check Stock

Start Clips - Universal Starter Deck Clips, Start Clips for Decking, Hidden Fasteners & Deck Starter Clips with Decking Screws (36 Pack, Black)

【Characteristic】 Start clips are specially used to install perimeter deck boards to make the installation of grooved composite deck easier. Hidden starter clips provide you a high-quality solution and a clean and fastener-free deck appearance..
【Material】 The start hidden fasteners made of high-quality stainless steel have strong corrosion resistance and are very suitable for indoor and outdoor use. The starter clips have high strength and perfect toughness, which can improve the installation efficiency greatly and have a better fastening effect on the deck..
【Contents】 You will get 36 high-quality start clips, 38 stainless screws and 1 drive bit. Adjust the installation method according to actual usage requirements, and place a decking clip every 12 to 16 inches..
【Application】 It is recommended to install the universal starter deck clips on the center edge of the joists, align the back of the deck starter clips on the same edge and fix them with screws, and then you can push the first board into the starter clips gently..
【Service】 We provide you with 100% return and 24-hour friendly customer service. If you are disappointed with this start clips, we can exchange them for free or give you a full refund..

Check Stock

DeckWise (Brown) Ipe Clip Extreme Hidden Deck Fasteners, 3/32' Spacing, Includes Stainless Steel Black #8x2' Trim-Head Screws for 600 Sq. Ft. of AD Hardwood or Thermal Wood Decks (1050 Bucket)

Kit includes 1050 BROWN hidden deck clips, 1140 #8×2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
1050 count kits will fasten 600 Sq. Ft. of decking (16″ on Center).
Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
Spacer leg automatically sets the gap between boards for consistent spacing.

Check Stock

DeckWise (Brown) Ipe Clip Extreme Hidden Deck Fasteners, 3/32\ Spacing, Includes Stainless Steel Black #8x2\ Trim-Head Screws for 300 Sq. Ft. of AD Hardwood or Thermal Wood Decks (525 Bucket)

Kit includes 525 BROWN hidden deck clips, 570 #8x2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
525 count kits will fasten 300 Sq. Ft. of decking (16" on Center).
Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
Spacer leg automatically sets the gap between boards for consistent spacing.

Check Stock

DeckWise (Black) Ipe Clip Extreme S Hidden Deck Fasteners, 5/32' Gap, Stainless Steel Black #8x2' Trim-Head Screws for 300 Sq.Ft. of AD and KD Hardwood, Thermal or Composite Decks (525 Bucket)

(570) #8×2″ T15 Stainless Steel Screws.
Automatically spaces deck boards at 5/32″ (4mm).
Manufactured from polyethylene with stainless steel black oxide insert.
Reduces fastener tilting during installation improving gap consistency.
For use with air/kiln dried hardwood, composite, or PVC decking.

Check Stock

304 Stainless Steel Start Clips Black Deck Clips Universal Decking Clips with Decking Screws for Composite Deck Boards, Hidden Fasteners (40)

Stainless Steel Material: starter clips are made of quality 304 stainless steel, strong texture, corrosion resistance, not easy to fade or break, suitable for outdoor installation, can play a nice fastening effect, to provide you with long term service.
Use Occasion: composite decking starter clips are applied to install composite decking with grooves on the sides, which conceal themselves while holding the deck in place, making them practical and attractive.
Installation Method: place the hidden deck fasteners for composite on the floor joists and fix them with screws, one every 12 to 16 inches, then push the floor into the card, easy to apply, will not waste a lot of your time and effort.
Rich Quantity to Meet Your Needs: the package includes 40 pieces of hidden deck clips, plenty quantity to meet your use demands, replacement demands and sharing demands, can give you a nice shopping experience.
Equipped with Screws: each starter clips for composite decking comes with a suitable stainless steel screw, easy to install, which can save you the trouble of buying screws and bring you a nice use experience.

Check Stock

Max HN120 PowerLite Concrete Nailer

✅ Shoots 14 gauge T-nails from 5/8'' to 2-1/2'' long | Hardened driver | Convenient side-load magazine | Rubber hand grip for added comfort | Heavy-duty light weight aluminum body | Adjustable exhaust.
✅ Soft grip handle reduces fatigue | Touch-strike security system is safe for the operator | Available with either sequential and contact fire trigger | Quick-release nosepiece for fast clearing of jams | Rubber can protect the surface of the gun when the gun fall.
✅ Magazine Capacity: 100 | Operating Pressure: 80-100 PSI | Air Inlet: 1/4" | Fastener Size: 14 Gauges - 0.087" Diameter | Fastener Type: T-Nails (both hardened & galvanized) | Fastener Length: 5/8" - 2-1/2" Long Nails.
✅ Includes: Concrete T-Nailer | Cardboard box.
✅ Wood to concrete & masonry furring | Plywood to concrete nailing | Light gauge steel drywall track to concrete | Wire lath to masonry | Steel banding to wood | Wood to light gauge steel (up to 3/16") | Decking | Fencing | Sub flooring | General construction.

Check Stock

Zipbolt 17.800 XT Exterior Post Anchor - for Anchoring Surface Mount Exterior Posts to Decking Patios and Verandas - Durable Strength 4x4 Post Base Actual 3.5x3.5

QUICK INSTALLATION - The only hidden deck post anchor of its kind, the 17.800 XT is quick and easy to install. It's also highly secure and allows easy....
SUPERIOR STRENGTH - The post base 4x4 wood anchor is made from the highest quality material with a high strength design that allows anchoring the post....
DURABLE BAKED FINISH - The Zipbolt 17.800 XT post anchors are double epoxy coated for added durability and have an acrylic baked finish that gives the....
MULTI-PURPOSE - The 17.800 XT can be used to mount exterior posts to decking, patios, verandas, and stairs or as a mailbox or fence post anchor. For....
PACKAGE INCLUDES - Everything needed for effortless mounting. You get one (3.5x3.5) 4x4 anchor bracket (separate fastener and base) with four....

Check Stock

CAMO Marksman Pro Kit Deck Tool 1750 Edge Screws & Bits Edge Fastening Installation 3/16 Spacing Fits 5-1/4-5-3/4 Composite Decking 0345001 …

ALL IN ONE KIT - Marksman PRO Tool, (1750) 2-3/8" Edge Screws (covers approx 500 sqft) and 2 replacement driver bits..
FASTENER FREE DECK SURFACE - installs two patented CAMO Edge Deck Screws through the edge of the deck board—not the surface—for a beautiful deck top.
AUTOMATIC SPACING - creates automatic 3/16 in. (5mm) spacing - ideal for composite and PVC decking.
COMPOSITE AND PVC DECKING - Fits any 5-1/4 in. (133mm) to 5-3/4 in. (146mm) deck board.
REDUCE SPLITTING & CRACKING - For exclusive use with CAMO Edge Deck Screws that auger material out to reduce splitting and cracking.

Check Stock

Air Locker AL83V3 3-1/4 Inch Full Round Head Coil Framing Nailer

Side load pop-out magazine for fast and easy reloads | Cylinder valve drive system for rapid response and increased durability.
Tool-less depth or drive adjustment for flush fastening in varying materials | Open nose design for easy extraction of a jammed nail | Ergonomic non-slip rubber grip on handle helps maintain a secure hold and comfort during use.
Specification: | Nail Capacity: 225-300 | Fastener Length: 2" - 3-1/4" | Fastener Diameter: 0.099" - 0.131" | Magazine Angle: 16° +/- 1° | Collation: Wire | Operating Pressure: 70-120 PSI | Firing Mode: Contact Actuation Trigger.
Applications: | Wall sheathing | Roof decking | Subflooring.
Mobile and modular home construction | Making of wooden boxes | Pallets and drums | Packing operations.

Check Stock

Trex Hideaway Plastic Fasteners with Screws - Box of 90

Includes: (90) universal fasteners, (90) 1-5/8″ stainless steel screws, (1) star head bit, and complete instructions.
Provides a clean, fastener-free appearance across the entire surface.

Check Stock