Top Hidden Fastener Deck Reviews

Fastenmaster Cortex for Decks Hidden Fasteners - Trex Transcend Tiki Torch 100 Lin.ft

  • Kit includes 175 BLACK hidden deck clips, 190 #8x2” black T15 stainless steel screws,driver and drill bits plus gap spacer tools.
  • 175 count kits will fasten 100 Sq. Ft. of decking (16" on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

TigerClaw Phillips Flat Head Black Oxide Stainless Steel Scrails Collated Fasteners 930 per box

  • The fastest all stainless hidden deck fastener system.
  • Coated black to blend screw into black clips.
  • Stainless steel for extreme environments.
Check Stock

DeckWise (Black) Ipe Clip EXTREMEKD Hidden Deck Fasteners, 1/4' Spacing, Stainless Steel Black #8x2' Trim-Head Screws for 600 Sq. Ft. of KD Hardwood, Thermal or Composite Decks (1050 Bucket)

  • Kit includes 1050 BLACK hidden deck clips, 1140 #8×2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 1050 count kits will fasten 600 Sq. Ft. of decking (16″ on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

DeckWise (Brown) Ipe Clip Extreme Hidden Deck Fasteners, 3/32' Spacing, Includes Stainless Steel Black #8x2' Trim-Head Screws for 600 Sq. Ft. of AD Hardwood or Thermal Wood Decks (1050 Bucket)

  • Kit includes 1050 BROWN hidden deck clips, 1140 #8×2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 1050 count kits will fasten 600 Sq. Ft. of decking (16″ on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

DeckWise (Brown) Ipe Clip Extreme Hidden Deck Fasteners, 3/32\ Spacing, Includes Stainless Steel Black #8x2\ Trim-Head Screws for 300 Sq. Ft. of AD Hardwood or Thermal Wood Decks (525 Bucket)

  • Kit includes 525 BROWN hidden deck clips, 570 #8x2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 525 count kits will fasten 300 Sq. Ft. of decking (16" on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

Trex Hideaway Universal Hidden Deck Fastener Clip 500 SQFT Bucket

  • Self-gapping hardware is the main fastener component that attaches two Trex boards together..
  • Features a stainless steel deck screw already set in the fastener for increased durability and easier installation..
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (50-Pack)

  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (100-Pack)

  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Topdex Hidden Deck Fasteners - Strong Plastic Clips with Stainless Steel Screws Inserts 0.19' Gap Spacing Between Wood Flooring Boards - Outdoor Decking Hardware, (90 Clips - 50 sqft)

  • A Sleek-Looking Deck – Build your decking like a pro with the help of these plastic fasteners. These flooring spacers let you mount your boards to the joists while keeping the screws hidden from sight..
  • Consistent Gap Spacing – Maintain the streamlined look of your decking and balcony flooring with these clips. Each plastic clip is designed to create a 0.19″ gap in between your terrace boards..
  • Easy Installation – Save time, effort, and energy in building your deck. To mount, just insert the clip into the side groove of your decking board, drive the screw with your drill, and you’re all set..
  • Crafted To Last – The last thing you need are decking clips that easily break. Our clips are made of tough plastic, while the screws are made of stainless steel that withstands rust or corrosion..
  • Decking Tools With Unbeatable Value – Get the most out of your money whenever you purchase our decking fastener clips. Each pack comes with plastic fasteners and stainless steel mounting screws..
Check Stock

DEWALT Drywall Screw Gun, 6.2-Amp (DW257)

  • Drywall screw gun has helical-cut steel and heat-treated gears for long life and durability.
  • DEWALT drywall screw gun has a high torque for deck building, drywall and heavy gauge steel stud framing.
  • The drywall gun has a depth-sensitive, "set and forget" nosepiece for consistent fastener depth.
  • Two-finger trigger for increased comfort and ease of use.
  • Helical-cut steel, heat-treated steel gears for long life and durability.
  • High torque for deck building and for drywall and heavy-gauge steel stud framing.
  • Depth-sensitive, set and forget nose piece for consistent fastener depth.
  • Two-finger rubber trigger for increased comfort.
Check Stock

DeckWise (Black) Ipe Clip Extreme S Hidden Deck Fasteners, 5/32' Gap, Stainless Steel Black #8x2' Trim-Head Screws for 300 Sq.Ft. of AD and KD Hardwood, Thermal or Composite Decks (525 Bucket)

  • (570) #8×2″ T15 Stainless Steel Screws.
  • Automatically spaces deck boards at 5/32″ (4mm).
  • Manufactured from polyethylene with stainless steel black oxide insert.
  • Reduces fastener tilting during installation improving gap consistency.
  • For use with air/kiln dried hardwood, composite, or PVC decking.
Check Stock

3M Dual Lock Reclosable Fastener TB3561/TB3562, Clear, 1 in x 10 ft, Type 400/170

  • Trial bag version (1 in. x 10 ft.) of 3M Dual Lock Reclosable Fastener SJ3561 and 3M Dual Lock Reclosable Fastener SJ3562.
  • Great for small jobs, prototyping and design evaluation.
  • Clear, interlocking mushroom-shaped heads provide strong, reliable and durable fastening that can be opened and closed multiple times.
  • Clear, acrylic, tape bonds well to a variety of substrates including metals, glass and plastics such as acrylics, polycarbonate and ABS.
  • Strong fastener secures with an audible snap, verifying closure.
  • An alternative to screws and bolts, this hidden fastener provides a snug fit and smooth aesthetic appearance.
Check Stock

JIG-A-DECK Deck Spacer & Fastener Alignment Guide for Hardwood, Composite, PVC and Pressure Treated Decking (2 PACK)

  • Helps create a straight line of screws across your whole deck.
  • JIG-A-DECK allows you to professionally space & fasten deck boards in a fraction of the time.
  • Allows perfect fastener spacing for both 4" & 6" wide deck boards.
  • Excellent for use with hardwood, composite PVC & pressure treated decking.
Check Stock