Top Hex Threaded Rods Reviews

Otis Patriot Series FG-701-40 .40 cal Pistol Kit

100% cotton 3” patches, .40 caliber mop, square patches, long slotted tip and two rods.
8” aircraft grade Memory-Flex cables with large slotted tip for proper Breech-to-Muzzle cleaning.
Multi-purpose tool functions as a t-handle, rod handle (attach a rod to the 8-32 threaded insert) and bit driver (insert selected bit into bit holder). Four bits included: 5/32” hex, T20 hex, Phillips #0, Phillips #2.

Check Stock

5pcs M8 x 1.25 x 35mm Stainless steel Long Coupling Hex Nut Connector

1/4-28 X 7/8" long, fine threads, 3/8" across the flats steel coupling nut with zinc finish.
Coupling nuts are threaded fasteners for joining two male threads, most commonly threaded rod.
Zinc plate over steel - more rust resistant.
Coupling Nuts are used to make up long rod assemblies from shorter lengths of rods.

Check Stock

NICEYRIG 15mm Rail Riser Rig System Quick Release Base Kit with QR Plate 15mm Rod Riser Clamp Short Rods Applicable DSLR Camera

...ont and back. The wingnut of 15mm rod clamp allows the adjustment of the rods easily..
Two short rods (2.5inch length) with 15mm riser rod clamp are attached on this easy cheese plate to used for DSLR camera baseplate lifting system. The Easy plate is equipped with various threaded holes(1/4" 3/8" screw threaded) in 9mm spacing..
Made of aluminum alloy, lightweight and durable. Package Includes: 1x 15mm rail riser kit, 1x hex spanner, 1x 1/4 tripod screw, 1x 3/8 tripod screw.

Check Stock

Masmoc 10Pack M8 x 80mm Fully Threaded Rod Stud 304 Stainless Steel Threaded Screw Right Hand Threads M8-1.25 Thread Pitch with 20PCS Hex Nuts and 20pcs Washers

Package :M8 x 80mm right hand full threaded rod 10PCS, M8 hex nuts 20PCS, M8 washer 20PCS..
Thread rod Dia.: M8, Thread Pitch: 1.25mm,total length: 80mm made of 304 stainless steel, provides great corrosion resistance and anti-rust ability for long service life, thread direction: right-hand thread..
These threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
These threaded studs can be drilled, cut, heated and shaped and widely applied in many occasions: anchor bolts, clamps, hangers and U-bolts and many more projects..

Check Stock

Murtenze 2Pcs M5 x 250mm Fully Threaded Rod, 304 Stainless Steel Long Threaded Screw Right Hand Threads (Silver)

Package & Size - You will get 2 pcs 5mm x 250mm threaded rods worth of.
Total length: 251 mm/9.84 inches. Fully threaded rods and studs can be drilled, cut, heated and formed.
Durable Material - These m5 threaded rods are made of 304 stainless steel, with excellent corrosion resistance and rust resistance, and long service life.
How to Use - Our stainless steel threaded rods can be used for assembly and fastening, screwed into nuts or threaded holes, and cut to the length you want.
Widely Application - These threaded rods and studs m5 are suitable for various applications, such as anchor bolts, fixtures, hangers, U-bolts, welding protrusions, and even model building, etc..
Satisfied Service - 100% Satisfaction If there is any quality problem with our product, we will reply within 24 hours. And you can return the product and get a refund within 30 days from receiving. You have no risk of trying, please order with confidence and no hesitate..

Check Stock

uxcell Hex Socket Self Tapping Screws M4 x 30mm Carbon Steel Wood Screw 50pcs

Made of carbon steel, which has higher hardness, corrosion resistance and rust resistance..
The self-drilling screws can drill well into the wood, sheet metal and other surfaces. The thread can reduce the resistance when screwing in and prevent cracking..
It can also connect metal hardware to the wood well because the threaded rods provide good retention in the wood..
Widely used in various industries such as manufacturing, construction, engineering, and assembly..

Check Stock

uxcell Hex Socket Self Tapping Screws M3 x 8mm Carbon Steel Wood Screw 400pcs

Made of carbon steel, which has higher hardness, corrosion resistance and rust resistance..
The self-drilling screws can drill well into the wood, sheet metal and other surfaces. The thread can reduce the resistance when screwing in and prevent cracking..
It can also connect metal hardware to the wood well because the threaded rods provide good retention in the wood..
Widely used in various industries such as manufacturing, construction, engineering, and assembly..

Check Stock

10Pcs M8 x 250mm 304 Stainless Steel Fully Threaded Rods, Threaded Rods Bar Studs, Right Hand Thread Long Threaded Screw, M8-1.25 Thread Pitch, Fits for Anchor Bolts, Hangers, U-Bolts (5/16\ x 10\)

【Quality Material】These m8 threaded rod made of 304 stainless steel, which provides excellent corrosion resistance and anti-rust ability for long service life.
【Package Content】You will get valued 10 pack of 8mm x 250mm threaded rods.
The fully threaded rods & studs can be drilled, cut, heated and shaped.
【All Threaded Rods】Our stainless steel thread rod can be used for assembly fastening, screw into threaded nuts or tapped holes, cut to your desired length.
【Wide Application】These 5/16 x 10 inches threaded rods are suitable for a wide variety of applications, such as anchor bolt, clamps, hangers, U-bolts, weld projections, even model building and more projects.

Check Stock

1/4-20 Threaded Insert Kit for Wood Furniture Screw Threaded Wood Insert Nut 10mm 15mm 20mm Length 61-Piece

20 pieces of 1/4-20 x 20 mm threaded inserts + 20 pieces of 1/4-20 x 15 mm threaded inserts + 20 pieces of 1/4-20 x 10 mm threaded inserts + 1 piece 6mm hex key..
Threaded inserts are made of carbon steel, they feature durable construction for a long-lasting hold..
Threads diameter of 1/4-20 x 20mm / 15mm: 0.410" / 10.4mm, threads diameter of 1/4-20 x 10mm: 0.389" / 9.9mm..
Threaded Inserts are best for composite materials, soft wood, plywood and hardwood, you just need to drill a hole that the size of the body into the wood for the threaded insert..
Hex Drive Threaded Insert with 1/4-20 Internal Thread Size, the hexagon drive allows for easy installation..

Check Stock

SMALLRIG Universal Lens Support Bracket Quick Release with Rod Clamp Lens - 2152

UNIVERSALITY: SmallRig 15mm LWS Rod Lens Support 2152 supports heavy lenses when using 15mm lightweight rods.
ADJUSTABILITY: 6mm Horizontal Adjustment, 22mm Vertical Adjustment to meet all kinds of lens height and position.
QUICK RELEASE: The half rod clamp structure allows to quick attachment/detachment without removing other rod-mount accessories.
STABLE: The lens support is one piece anti-off designed 1/4"-20 threaded rod and includes a Y-bracket support will be more stable to support the lens. And a hole on the rod to be secure again for a hex spanner.
PROTECTION: Lens support adapter comes with rubber pads to protect your lens from wear-and-tear.

Check Stock

uxcell Hex Socket Self Tapping Screws 1/4 x 1 410 Stainless Steel Sheet Metal Flat Head Drilling Screw 50pcs

Made of 410 stainless steel, which has higher hardness, corrosion resistance and rust resistance..
The self-drilling screws can drill well into the wood, sheet metal and other surfaces. The thread can reduce the resistance when screwing in and prevent cracking..
It can also connect metal hardware to the wood well because the threaded rods provide good retention in the wood..
Widely used in various industries such as manufacturing, construction, engineering, and assembly..

Check Stock

50 Pieces 1/4-20 Threaded Inserts for Wood Nutsert Furniture Screw-in Nut 15mm Length Hex Drive

1/4-20 threaded inserts for woodworking applications, 15mm length, hex drive Allen key included..
Threaded inserts are easy to install, simply drill the appropriately sized hole and Install the inserts with the hex key provided or other optional drive tools you have..
1/4-20 threaded inserts are the ideal solution for softwood, hardwood, plywood, MDF, and composition board..
Threaded inserts head diameter: 0.461″ / 11.7mm, body diameter: 0.315″ / 8mm, threads diameter: 0.410″ / 10.4mm..
In Softwood, recommended drill bits for these threaded inserts are 8.5mm, 9mm, 9.5mm / 3/8″. In hardwood such as white oak or maple, recommended drill bits are 9.5mm, 3/8 inch, or 10mm..

Check Stock

XINGYHENG 210pcs M3 M4 M 5 M6 M8 M10 M12 Wire Thread Inserts Steel Sheath Helicoil Type Screw Repair Sleeve Assortment Kit with Plastic Box

THREADED INSERT INSTALL TOOL – E-Z LOK Threaded Insert Drive Tool speeds up the installation of threaded inserts without engaging internal threads..
SPEEDS UP INSTALLATION – Quickly insert threaded inserts for soft wood with this optional threaded insert installation tool without time-consuming thread engagement..
FITS STANDARD POWER DRILLS – A standard hex shaft allows for the use of this threaded insert drill tool with standard power drills and drill presses..
FOR USE WITH THREAD INSERTS – This threaded insert tool is used exclusively to quickly drive in Hex Drive Inserts..
IT’S AS EASY AS 1-2-3 – Installation is easy. Simply drill a hole with a standard drill. Thread an E-Z LOK thread insert into place with this optional drive tool..

Check Stock