Top Helm Seat Reviews

Pyle PLMRW8 8-Inch Outdoor Marine Audio Subwoofer - 400 Watt Single White Waterproof Bass Loud Speaker For Marine Stereo Sound System Under Helm or Box Case Mount in Small Boat Water Vehicle

400 WATT POWER: Pyle’s 8 Inch Marine Subwoofer offers a peak power of 400 watts w/ 4ohm impedance. It lets you pump out some great low frequency....
FOR ENHANCED SOUND: The Hydra subwoofer is a great addition to your marine stereo sound system. No sound system is complete without the perfect....
WATER-RESISTANT: The professional compact loud speaker system features a marine grade waterproof plastic case construction making it safe to be....
SUPERIOR POWERFUL SOUND: The white outdoor bass speaker features an 8” high quality polypropylene cone. The 40 oz. magnetic structure and 1.5”....
8” SINGLE SUBWOOFER: The boat subwoofer can be installed under or in front of the compartment or helm, behind the helm seat or you can mount them....

Check Stock

Wise 8WD375 Fore & AFT Seat Slide with Locking Seat Mount, for 2 3/8\ Seat Pedestal Post

Mounts to most boat seats and Helm seats.
Pre-Drilled hole pattern to mount seat or hardware.

Check Stock

Wise 8WD115-1012 Deluxe Pontoon Steering Console, Grey/Red/Charcoal

Deluxe Series Steering Console with 2 Cup Holders.
Helm/Console Dimensions - Height: 29.25", Width: 26", Depth: 18".
Injection Molded Plastic Construction, Marine Grade Vinyl.
Reinforced Helm Dash Panel ready for custom installation of steering helm mechanism and gauge cluster.

Check Stock

Bennett FO4322 Complete Kit Bolt Electric Trim Tab BOLT129 with Integrated Helm Control OBI9000E 12 x 9 inches

FEATURES BENNETT BOLT Trim Tab (BOLT129) BENETT BOLT Control with NEW 2020 Integrated Helm Control (OBI9000E) COMPATIBILITY: Boats up to 22 ft long.
TWO (2) Stainless steel trim planes (tabs) and mounting plates (12 x 9 inches) / TWO (2) 20ft. harnesses with waterproof connectors (BAW2020) / BENETT....
TWO (2) 12-volt actuators with 6ft. wire harnesses and waterproof connectors (BEA3000) / Mounting Hardware Included.
The NEW 2020 Integrated Helm Control is Attractive and user-friendly, stand-alone helm control without the need for an external control unit as was in....
The functionality and "brains" of the Integrated Helm control unit are engineered directly into a single, space-saving, and simple-to-install keypad.....

Check Stock

SeaDek 5mm Foam | Embossed Anti- Fatigue Helm Station Pad | Non Slip Boat Standing Mat | 3M Adhesive Backing Cool Gray Large

SeaDek FOAM: Enjoy the quality that you've come to know and love with our authentic Seadek Foam helm pad..
NON SKID SURFACE: Our brushed pattern is made from closed-cell PE/EVA blended foam material. SeaDek Helm Station Pads provide the utmost comfort while....
COMFORT: Our softest, most comfortable SeaDek pad featuring an ultra-comfortable low-density 17mm foundation with our legendary standard 3mm top layer....
EASY APPLICATION: Each helm pad features a 3M adhesive backing. Clean the desired surface, and then peel and stick..

Check Stock

SeaDek Pad | Realtree Helm Pads | Anti-Fatigue | Anti Slip | 20mm Thickness | Brushed Texture | Storm Gray/Black - Timber Pattern Large

SeaDek FOAM: Enjoy the quality that you've come to know and love with our authentic Seadek Foam helm pad..
NON SKID SURFACE: Our brushed pattern is made from closed-cell PE/EVA blended foam material. SeaDek Helm Station Pads provide the utmost comfort while....
COMFORT: Our softest, most comfortable SeaDek pad featuring an ultra-comfortable low-density 17mm foundation with our legendary standard 3mm top layer....
EASY APPLICATION: Each helm pad features a 3M adhesive backing. Clean the desired surface, and then peel and stick..

Check Stock

SeaDek Pad | Dual Density Helm Pads | Anti-Fatigue | Anti Slip | 20mm Thickness | Brushed Texture | Storm Gray Over Black Large

SeaDek FOAM: Enjoy the quality that you've come to know and love with our authentic Seadek Foam helm pad..
NON SKID SURFACE: Our brushed pattern is made from closed-cell PE/EVA blended foam material. SeaDek Helm Station Pads provide the utmost comfort while....
COMFORT: Our softest, most comfortable SeaDek pad featuring an ultra-comfortable low-density 17mm foundation with our legendary standard 3mm top layer....
EASY APPLICATION: Each helm pad features a 3M adhesive backing. Clean the desired surface, and then peel and stick..

Check Stock

WEEMS & PLATH Man Overboard Wheel

1. Turn dial on wheel to match vessel’s current heading..
2. Turn helm hard to port until compass heading has changed 60 degrees. See B on device for compass position that matches this 60 degree turn..
3. Turn helm hard to starboard to come around 240 degrees to reach reciprocal course as indicated at C on tool..
4. When vessel reaches reciprocal heading, straighten helm. This will bring the vessel back onto its original wake, traveling in the opposite direction..
5. Slow down and look for man overboard. Follow steps indicated for recovery on wheel..

Check Stock

Dometic SeaStar 1.7 Helm, HH5271-3, Front Mount

Convenient front of dash fill which can be retrofitted into an old SeaStar 4.5" hole cutout.
Positionable Stainless Steel O-Ring (ORB) Fittings for easy hose routing.
Compact helm has only a 4-7/16" footprint and needs only a 3” dash hole.
4.9 turns lock-to-lock in most typical single cylinder outboard applications.
INSTALLATION NOTE: Do NOT attempt to install an NPT pipe fitting into a -3 helm hose fitting port. Doing so will lead to irreparable damage to the helm.

Check Stock

Castaway Customs | SeaDek 13mm Foam | Teak Anti- Fatigue Helm Station Pad | Non Slip Boat Standing Mat | 3M Adhesive Backing (Mocha/Black, Large)

SeaDek FOAM: Enjoy the quality that you've come to know and love with our authentic Seadek Foam helm pad..
NON SKID SURFACE: Our Teak pattern is made from closed-cell PE/EVA blended foam material. SeaDek Helm Station Pads provide the utmost comfort while standing for long hours on the water..
COMFORT: Our 13mm shock absorbing mat is designed for comfort. Do your knees and feet a favor on your long drives and buy a SeaDek helm Pad..
EASY APPLICATION: Each helm pad features a 3M adhesive backing. Clean the desired surface, and then peel and stick..
EASY TO CLEAN: Our durable foam allows these pads to be wiped down and cleaned easily for continued use. These UV protected bolsters are also stain and fade resistant..

Check Stock

Millennium Marine SW-300 Palma Horse Seat, Gray

ELEVATED VIEW – Helm seating provides leg and back support when standing for extended periods, while the elevated perch helps you navigate to the best locations. Industry leading 2.25” tubing handle rigorous offshore water conditions..
DELUXE BACKREST – A high-quality backrest provides additional support while you’re moving across the water at highspeed or relaxing while fishing. Four rod holders and three stainless steel cup holders organize everything you need safely at arm’s reach..
STORAGE – Below seat storage for fishing supplies, tools or valuables. The base is designed to accommodate a large cooler or livewell for storing bait. The footrest unfolds for support and stability, then folds back up for safety..
HIGH-QUALITY MATERIALS – Constructed with machined 6061 marine grade aluminum for lightweight durability. A bright-dipped anodized or power coated finish ensures a corrosion resistant finish. Marine grade vinyl (ASTM G21 tested) protects your seat from weather and decay, while high-density foam with flow-through technology keeps your seat dry in the toughest conditions..

Check Stock

DS18 CF10SUB Black 10 Inch 10" Hydro Marine/ATV/UTV Weather Proof Subwoofer (with Integrated RGB Lights-600W Max/300W RMS)

WATT POWER - 10-Inch Marine Subwoofer offers a peak power of 600 watts w/ 4ohm impedance. It lets you pump out some great low-frequency bass volume to enhance the party vibe making it a great addition to your Marine / ATV / UTV music audio system.
FOR ENHANCED SOUND - The Hydro subwoofer is a great addition to your marine stereo sound system. No sound system is complete without the perfect subwoofer for complimentary bass so don't deprive your boat from the absolute best sound you can get.
WATERPROOF - The professional loud speaker system features IP65 Marine grade Compliant - 100% UV stable case construction making it safe to be installed and used in places where moderate water splashes occur such as in marine vehicles.
SUPERIOR POWERFUL SOUND - The white outdoor bass speaker features a 10-inch high-quality polypropylene cone. The 40 oz magnetic structure and 2-inch high-temperature voice coil boom w/ power and achieve a frequency response of 25 Hz to 2 kHz.
INSTALLATION/PLACEMENT - The boat subwoofer can be installed under or in front of the compartment or helm, behind the helm seat or you can mount them inside a box. The sub has an overall diameter 10. 76", Cutout Diameter 8. 78", and 5" mounting depth.

Check Stock

Oceansouth T-Top Console Cover Extra Large Width 58" Length 94" Height 72"

T-Top Console Cover 100% solution-dyed polyester fabric 7.6 oz/yd.
UV Resistant, Breathable and weatherproof.
Full-length Size #8 Delrin zipper allows easy fitting.
1″ Webbing & Nylon adjustment buckles ensures a tight fit..
Elasticised band across helm seat, top and bottom of the cover ensure a snug fit.

Check Stock