Top Heavy Duty Large Head Rivets Reviews

Louisville Ladder FS1508 Ladder, 8-Foot, Orange

  • ...NDUSTRY STANDARDS: Louisville Ladder is committed to meet or exceed all safety standards set by ANSI and OSHA.
  • Molded top with handyman’s tool slots, molded-in slots help keep tools close at hand.
  • 300-pound load capacity, includes weight of user and tools.
  • Each step secured with six large-head semi-tubular steel rivets for maximum strength.
  • Non-conductive full-channel rails are covered with a polyester veil for years of durable service.
  • Heavy-duty bottom back brace provides additional strength to the bottom of the ladder.
Check Stock

CRAFTSMAN Pop Rivet Tool, Swivel Head Gun (CMHT82674)

  • The pop rivet tool head rotates 360 degree for hard to reach spots and overhead use..
  • Detachable container of the riveter tool collects mandrels for safety and easy disposal..
  • The heavy-duty rivet gun has rugged die cast housing..
  • Rated for use with aluminum and steel rivets..
  • Uses 1/8-inch, 3/32-inch, 5/32-inch & 3/16-inch diameter steel & aluminum rivets..
Check Stock

Keadic 120Pcs 3/16 x 1/2 4.8x13 mm Aluminum Large Flange Blind Rivet Flange Diameter 5/8 16 mm Round Dome Open Head Blinds Pop Rivets for Joining Metal Plate Pipe Automotive

  • 【Popular Size Rivet】 The large flange blind rivets kit contains 120 pcs 3/16" x 1/2"( 4.8 x 13mm) pop rivets, the flange diameter is about 5/8" (16mm). Standard size will meet your demands. Pls refer to the picture for more size detail..
  • 【Premium Aluminum Material】 Blind pop rivets have high-quality aluminum body and steel mandrel for corrosion and rust resistance. It does not deform surfaces after the riveting process is finished. Smooth and burr-free surface can be well matched with the rivet gun..
  • 【Provide A Strong Grip】The heavy duty material and thick shaft design offers a strong grip, prevent stripping effectively and a lasting connection without corrosion or popping. The large flange design can increase the connection area with the plat to expand force-bearing area and stable holding..
  • 【Easy to Use】 Simply drill a suitable hole and insert the blind rivet head into it and use rivet gun to pull the mandrel through. Then, you can lock the rivet in place and get a strong fastening..
  • 【Multipurpose Fastener】Our aluminum large flange rivet is corrosion and rust resistant so that they are works great on indoor and outdoor. Ideal for joining sheet metal, plastics, rubber, wood, grip and laminates. Widely applied in caravans, trailers, f....
Check Stock

Louisville Ladder FS1504 Ladder Step FBRGLS TYPE1A 4FT, 4-Feet, Orange (Renewed)

  • The product is 4 foot fiberglass type 1A stepladder.
  • Molded top with handyman’s tool slots, molded-in slots help keep tools close at hand.
  • 300 pound load capacity, includes weight of user and tools.
  • Each step secured with six, large headed, semi-tubular steel rivets for maximum strength.
  • Nonconductive full channel rails are covered with a polyester veil for years of durable service.
  • Heavy duty bottom back brace provides additional strength to the bottom of the ladder.
  • 300 Lbs, load capacity, includes weight of user and tools. Multifunctional Raptor Top With Multiple Tool Slots And Magnet.
Check Stock

JUNESunShine 84Pcs, Copper Rivets and Burrs, 9 and #12 Burrs Setter, Leather Rivets Fastener Install Setting Tool with 4mm Leather Hole Punch Cutter for Belts Wallets Collars Leather Working Supplies

  • [Unbelievable! 40 Set Solid Copper Rivets and Burrs for Leather] Totally 40 rivets and burrs set: 15 x copper rivets and burrs(11mm x 4mm x 19 mm), 15 x copper rivets and burrs(11mm x 4mm x 14.5 mm), 10 x copper rivets and burrs(10mm x 3.4mm x 19 mm), 1 x 2 IN 1 rivet and burr setter is used for both size 9 and size 12 burrs rivet. 2 x leather hole punch cutters(Dia. 3.5mm and Dia. 4mm)..
  • [Stunning Size 9 and Size 12 Copper Rivet Fastener Install Setting Tool and Extra Dia. 3.5mm and Dia. 4mm Precision Round Leather Hole Punch] 2 IN 1 Stainless steel heavy duty setter, one tool can install the rivets in No. 9 Size, No. 12 Size. Bigger convenient and higher efficient. Size: 4.7"x 0.79" x 0.43"(L x W x H).
  • 2Pcs Heavy-duty permanent round hollow hole punch cutters, quenching treatment, more rigid and durable..
  • [In Less Than Few Mintues, Make A Nice Finished Rivet, Enjoyed The Happiness Brought By Leather Craftsmanship] Whether you are a hobbyist of leather crafts or a professional, it is worth having the copper rivets kit, which is EASY to operate and QUICK to install. Don't worry about installation failure..
  • [More Quantity & It Is Far More Cost-effective, 40 Set, 2 Lengths, 2 Sizes Copper Rivets for Leather] 40 x Rivet and burr set, more quantity tha....
Check Stock

Louisville 6' Fiberglass Step Ladder

  • WORK BECOMES EASIER: Molded Top With Handyman's Tool Slots.
  • STURDY AND STRONG: With its 300-Pound capacity, elegant design and smooth finish, you won’t find a more durable, reliable ladder..
  • DESIGNED FOR YOUR NEEDS: Molded top with recessed tray, nonconductive structural molded top.
  • PROTECTED: Inside spreader braces keep your ladder protected while in transport as well as provide as safe and stable ladder.
  • 300-POUND LOAD CAPACITY, includes weight of user and tools.
  • Molded top with handyman's tool slots, molded-in slots help keep tools close at hand.
  • 300-pound load capacity, includes weight of user and tools.
  • Each step secured with six large-head semi-tubular steel rivets for maximum strength.
  • Non-conductive full-channel rails are covered with a polyester veil for years of durable service.
  • Heavy-duty bottom back brace provides additional strength to the bottom of the ladder.
Check Stock

Style n Craft 98-437 Pocket Top Grain 3\ Tapered Work Belt

  • Heavy Duty Top Grain Oiled Leather In Brown Color With Contrast Stitching In Heavy Duty Nylon Thread.
  • Heavy top grain leather in dark tan color.
  • 3 piece construction with joints reinforced with stitching & rivets.
  • ront taper/cut down design for bending comfort.
Check Stock

3/8\ Dia. X 3/8\ Length Steel Solid Round Head Rivet, Plain Finish, (Pack of 1 lb - Approximately 30 Pieces)

  • INCLUDE 50PCS SOLID BRASS 3/4" LONG SIZE 12 RIVETS AND 50PCS BURRS WASHERS.
  • HEAD CAP DIAMETER 0.38"(9.5mm),RIVETS OVERALL LENGTH IS 3/4"(19MM),SHAFT DIAMETER IS 3.4MM.
  • COULD USE SIZE 12 BURRS SETTER TO INSTALL,YOU COULD FIND THIS TOOL BY SEARCHING ASIN "B07Y7QK82R " IN OUR AMAZON STORE"DGOL".
  • THIS TYPE BRASS ARE SHINNING AND STRONG,HEAVY DUTY,EVERY CRAFTMEN SHOULD HAVE.
Check Stock

Style n Craft 70-603 10 Pocket Heavy Duty Oiled Top Grain Leather Electrician s/Contractor s Tool Pouch

  • Stitching with heavy duty nylon thread in contrast color.
  • Rivets with caps for safety in antique finish.
Check Stock

Gatorback B102 Professional Carpenters 7 Pocket Fastener Pouch. Tool Belt Ready

  • Main compartment, 1 upper pocket, 1 interior speed square pocket, 2 large hanging pockets, 1 exterior slot, 1 exterior strap for add-on pouches..
  • Made from ultra durable 1250 denier DuraTek fabric..
  • High density nylon webbing is sewn around the pouch and pockets. The heavy duty nylon adds to the durability of the pouch and prevents fraying from constant use..
  • Inside of the pouch is a heavy duty plastic insert sewn in between the 1250 denier DuraTek nylon. This insert keeps the pouches from ever losing its shape and prevents tools from poking through..
  • Every stress point is reinforced with extremely strong bar-tack stitching and heavy duty metal rivets to ensure that the pockets won't ever tear out.
Check Stock

Ultimate Heavy Duty Pond Care Interchangeable Net System for Water Garden Ponds, Includes Sludge Net Head, Fish Catching Nets and 2 Poles

  • Pond H2o's Ultimate Heavy Duty Pond Care Interchangeable Net System for Water gardens includes a variety of Three (3) different Water Garden Pond Net Heads and Two (2) Poles. All pieces are interchangeable, each head will work on each pole..
  • One (1) Heavy Duty Sludge Pond Net Head, 18 Inch Head, 16 Inch Deep with Fish Safe Half Inch with fine Mesh. Has a protective guard to prevent the net from fraying and causing damage to the liner. One (1) Heavy Duty Fish Net Head, 16 Inch Head, 16 Inch Deep with Fish Safe Mesh. The fish catching Net has a protective guard to prevent the net from fraying and protect your fish, perfect for skimming leaves and removing bottom sludge or catching and transporting small and large fish..
  • One (1) Heavy Duty Skimmer Net Head, Size of Head is 21 Inch Long and 10 Inch Wide. Optimum Skimmer surface length is 12 inch. Fine black mesh netting is on a net zipper system and can be replaced if damaged or snagged on rocks, plants etc making this a truly heavy duty and life time pond skimmer net..
  • One (1) Heavy Duty Telescopic Pole, sturdy, aluminum handle with two soft neoprene grips, extends to 10 Ft in length (stores at 44 Inches). The Click to lock design makes switching between net heads fast and easy. One (1) Heavy Duty 39 Inch ....
Check Stock

No Kidding Around

  • ...snacks, drinks and fruits in one bag. Powerful organization ability to carry more foods easily to improve your daily life. Lunch bags for women, large lunch bags..
  • Heavy Duty and Durable-High quality tear and water resistant oxford fabric, heavy duty metal zippers and 8pcs rivets for handle position. Double sewing around the connection and rivets design will improve the bearing capacity, 5000+ shaking with 25lbs load, let the bag extremely durable. Lunch bags for work..
  • Wide Open Design Convenient-Top of the lunch bag can be opened up to 10.5"L x 6.5"W by zipper closure, that means your lunch container can be put into the bag and taken out of the bag horizontally and quickly. Wide open design is for easy accessing and it can prevent the liquid from leaking out of the container and soiling inside of the bag. Save your cleaning time- Insulated lunch bags..
  • Comfortable Carrying-The fashionable reusable lunch box comes with a detachable shoulder strap. Which makes it easy to carry by hand or greatly tied to your backpack or along side a briefcase. Soft handle is comfortable for you hands.Great valentines day gifts for....
Check Stock

JBZD Rivet 15Pcs M5 6-50mm Steel Flat Round Double Caps Studs Rivets Stud Fastener Set Bolts and Nuts Metic nut and Bolt Assortment Fasteners That Meet Daily Needs (Stem Length : M5X12MM)

  • High quality Solid Brass rivets &burrs12leathercraft belt luggage rivets studs Permanent Tack Fasteners.
  • For Use In Saddlery, Harness, Tack Repair. Will Not Rust, Heavy Duty Permanent Fasteners..
  • The Size Of The Head Of The Rivet And The Washer (Burr) Is 7/16" And The Thickness Of The Shaft Of The Rivet Is Just Over 1/8"..
Check Stock