Top Heat treated Rivets Reviews

TEKTON Cold Chisel Set, 3-Piece (1/4, 3/8, 1/2 in.) | PNC91002

  • Includes 3-pc. cold chisels: 1/4, 3/8, 1/2 in..
  • Cuts bolts, rods, and rivets, cleans off waste and slag, and shapes cast iron, steel, brass, bronze, copper, and aluminum.
  • Forged and machined from premium, high carbon steel.
  • Rough ground after forging, a second sharpening after heat treating produces a high-performance cutting edge.
  • Individual heat treatment allows the right balance of a hardened edge with a softer striking end.
Check Stock

TEKTON Long Cold Chisel Set 3-Piece 1/2 3/4 1 in | 66506

  • Cuts bolts, rods, and rivets, cleans off waste and slag, and shapes cast iron, steel, brass, bronze, copper, and aluminum.
  • Forged and machined from premium high-carbon steel.
  • Rough ground after forging, a second sharpening after heat treating produces a high-performance cutting edge.
  • Individual heat treatment allows the right balance of a hardened edge with a softer striking end.
  • Classic natural finish has a dry-touch rust-preventative coating.
Check Stock

2006 Kawasaki KFX700 Oil Change Kit

  • 250 pieces of original factory fit flange bolts, nuts, and fender washers.
  • Strong heat treated 8.8 & 10.9 grade bolts.
  • Generous selection of the correct Nylon Push Rivets.
  • Used for maintenance, repair, and or restoration of Kawasaki KFX450 KFX700 KFX400.
  • Complete and organized in a tough 18 compartment poly storage box.
Check Stock

4 Pack 18 Inch Chainsaw Chain 3/8 LP Pitch .050 Gauge 62 Drive Links Fits Husqvarna Echo Poulan Craftsman and more

  • Chain Specifications: 4 Pack 18 Inch Chainsaw Chain 3/8" LP Pitch .050'' Gauge 62 Drive Links..
  • Compatible Brands: Fits most chainsaws brands that run 3/8 Inch Pitch, .050 Inch (1.3 mm) gauge, 62 drive links. Craftsman, Echo, Homelite, Husqvarna, Kobalt, McCulloch, Poulan, Remington, etc..
  • Smooth Cutting: High toughness, heat-treated semi-chisel chain cuts smoothly with a higher tolerance for debris. Durable, low-kickback, low-vibration chain helps reduce user fatigue and allows consistent cuts..
  • Wear Resistant: Premium industrial hard chrome outer layer and hardened rivets help reduce wear and chain adjustments. Hardened rivets provide a stronger connection between chain links, adding strength and withstanding loads..
  • Note: Please verify your parameters to ensure this chain fits your chainsaw. If you have any questions or concerns about compatible chainsaw models, please feel free to contact us..
Check Stock

HORUSDY 3-Piece Heavy Duty Cold Chisels Set 3/8 in 1/2 in 5/8 in

  • Available in 3 different shapes and designs..
  • Includes 3PC Cold Chisels: 3/8" , 1/2" , 5/8" ..
  • Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel..
  • For cutting rivets, rods and bolts, removing slag and waste, forming steel, brass, bronze, cast iron and aluminum..
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC..
Check Stock

HORUSDY 3-Pieces Heavy Duty Cold Chisels Set, Long 8\

  • Available in 3 different shapes and designs. From chipping away masonry, concrete, metal and stone to carving wood and masonry works to meet all your needs..
  • Includes 3PC Octagonal Cold Chisels: L12" x 1" , L10" x 7/8" , L8" x 25/32" ..
  • Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel..
  • For cutting rivets, rods and bolts, removing slag and waste, forming steel, brass, bronze, cast iron and aluminum..
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC..
Check Stock

Oregon S62 AdvanceCut Chainsaw Chain for 18-Inch Bar -62 Drive Links – low-kickback chain fits Husqvarna, Echo, Poulan, Craftsman, Echo and more

  • Durable, low-kickback, low-vibration chain helps reduce user fatigue for increased periods of work- For all chainsaws brands that run 3/8 Inch Pitch, .050 Inch (1.3 mm) gauge, 62 drive links.
  • Fits these chainsaw models: Craftsman/Sears 316.38090, 358.34118, 358.34190, Homelite 23AV, 3300, UT10580, UT10582, UT10588, UT10589, Kobalt KCS180B and KCS 4080-06.
  • McCulloch CS340, CS380 and other similar models.
  • Precision, heat-treated semi-chisel chain cuts smoothly with a higher tolerance for debris. Tough, long-lasting chrome outer layer and hardened rivets help reduce wear and chain adjustments.
  • Tough, long-lasting chrome outer layer and hardened rivets help reduce wear and allow for fewer chain adjustments.
  • Built-in Lubri-Tec automatic oiling system extends the life of your chain by delivering oil to key parts of the chain so you can work smarter with less downtime and maintenance.
Check Stock

Dragon Classic Wide Santoku Chef s Knife 7.5 inch

  • PROFESSIONAL 7.5 IN CHEFS SANTOKU KNIFE - The Apogee Culinary Designs Dragon Extra Wide Santoku Knife works exceptionally well on vegetables,....
  • BD1N STEEL - Heat treated to 63 HRC, our steel gives excellent edge retention while staying relatively easy to sharpen..
  • EXTREME DURABILITY - Dragon knives are only made with BD1N Stainless Steel allows for traditional Japanese styling, sharpness, design and performance....
  • BEAUTIFUL HANDLE - The handle is made of black resin and linen canvas micarta with three stainless steel rivets. The canvas material is dyed black and....
Check Stock

Yoshimura RS-2 Slip-On Muffler Stainless/Alum/Stainless for Honda TRX400EX 99-09

  • 150 pieces of original factory fit flange bolts, lug nuts, and fender washers.
  • Strong heat treated 8.8 & 10.9 grade bolts.
  • Generous selection of the correct Nylon Push Rivets for fenders and bumper skid plate bolts.
  • Used for maintenance, repair, and or restoration of Honda 400EX 250EX and X models.
  • Complete and organized in a tough 6 compartment high impact poly storage box.
Check Stock

Pop Rivet With Large Flange Steel Mandrel/Aluminum Body 3/16 x3/8 Inch 4,8x10 mm Flange Diameter 5/8 15.5 mm Blind Rivet Grip Range 1/8-3/16 Inch 3-5 mm Qty 100 pcs

  • ⚙️ Rivet size: Hole size: 13/64" (4,9-5 mm), Diameter: 3/16" (4,8 mm), Lenght: 3/8" (10 mm), Flange diameter: 5/8" (15,5 mm), Grip range: 1/8" - 3/16" (3-5 mm).
  • ⚙️ A large flange aluminum blind rivet increases the contact with the board increasing the force area..
  • ⚙️ It does not deform surfaces after the riveting process is finished. good resistance to temperature variations. Fast simple and great quality assembly, requires simple and lightweight tools. The riveting process is environmentally friendly, free smoke, sparks, fumes..
  • ⚙️ Pop rivets with breaking steel mandrel, designed for fastening in a fast and simple way of all kinds of materials with different types of manufacturing: composites, laminate materials, heat-treated, etc..
  • ⚙️ Package: 100 pcs, 3/16"x3/8" (4,8x10 mm) pop rivets with aluminum large flange.
Check Stock

250pc Specbolt Yamaha Blaster Bolt Kit for Maintenance & Restoration OEM Spec Fasteners ATV Quad YFS200

  • 250 pieces of original factory fit flange bolts, nuts, special Yamaha fasteners, and fender washers.
  • Strong heat treated 8.8 & 10.9 grade bolts that meet and exceed original specs.
  • Generous selection of the correct Nylon Push Rivets, full set of lug nuts, bumper bolts, and more.
  • Used for maintenance, repair, and or restoration of Yamaha Blaster ATV YFS200 1988 TO 2006.
  • Complete and organized in a tough 18 compartment high impact poly storage box.
Check Stock

Veto MP1 (Multi-Purpose Small Pouch)

  • 11 vertical pockets, Electrical tape strap, Snap-over belt loop, Stainless tape clip, 2-D rings, Back pocket "stuffer blocker".
  • Waterproof Body Fabric: 1200 PVC Impregnated Denier Nylon, Waterproof Tool Pocket Fabric: 1200 PVC Impregnated Denier Nylon.
  • Treated Cow Leather, D-Rings: Powder Coated Steel.
  • Rivets: 38 zinc, marine grade rivets, Stitching: Industrial Strength Double Nylon Stitching.
  • Warranty: 5 Years (see Veto warranty terms and conditions).
Check Stock

Specbolt Fasteners Brand 150pc Bolt Kit. Fits: Yamaha Blaster YFS200 ATV Maintenance Body fenders lugs Motor Engine Exhaust

  • 150 pieces of original factory fit flange bolts, nuts, special Yamaha fasteners, and fender washers.
  • Strong heat treated 8.8 & 10.9 grade bolts that meet and exceed original specs.
  • Generous selection of the correct Nylon Push Rivets, full set of lug nuts, bumper bolts, and more.
  • Used for maintenance, repair, and or restoration of Yamaha Blaster ATV YFS200 1988 TO 2006.
  • Complete and organized in a tough 6 compartment high impact poly storage box.
Check Stock