Top Headphone Jack Removal Tool Reviews

Headphone Jack Removal Tool, Tube Grip Stick Puller, Jack Remover ，Headphone Plug Extraction Tool- Remove Broken Headphone Plug from Headphone Jack of Mobile Devices 6 PCS

Applicable To :all models of mobile phones, pads and computers headphone jack, built to easily remove broken 3.5mm headphone plugs from jacks..
Instructions: Insert the steel tube between the headphone jack and a broken plug. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the steel tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with another one headphone jack remover..
Before you use this tool: please read the instructions carefully. because the gap between the earphone plug and the earphone hole is very small,You need to plug it in deep enough..
Tep: This set of headphone jack remover tool is considered a single-use tool..
If you have any question, please feel free to contact us by email..

Check Stock

GripperX Headphone Plug Extraction Tool with Key Ring and Cleaning Brush - Remove Broken Headphone Plug from Headphone Jack of Mobile Devices

NO GUARANTEES: This tool comes with no guarantees implied or expressed and should be considered a single-use tool..
PURPOSE: GripperX is designed for the purpose of extracting a headphone plug that has broken apart, leaving the tip of the plug lodged inside the headphone jack of a mobile device..
HEADPHONE JACKS: Designed to be used on 3.5mm jacks found on phones, laptops and smaller devices..
HOW TO USE: Insert GripperX between headphone jack housing and broken plug. You may need to lightly tap it in. It should go in about the same length of the headphone plug. Pinch with fingers or pliers for better grip. With broken plug enclosed, pull to remove. Restore functionality to your device's headphone jack..
USE WITH CAUTION: Rotating or inserting too far may damage the device. The opening is sharp and may cause harm to your fingers. We recommend using gloves and pliers when handling this tool..

Check Stock

CoverON® BlackBerry Q5 Hard Silicone Hybrid Kickstand Case - Hot Pink

Made with a High Quality shatter-proof hard plastic and a soft flexible silicone skin for maximum protection.
Precisely engineered to preserve full use of volume buttons, charger, camera, microphone, headphone jack, and all other ports.
A pop-out kickstand is attached on the back of the case for hands-free viewing of your device.
Includes case removal pry tool - 90 Day Warranty on CoverON cases.

Check Stock

Okyfree Car Lockout Kit, Car Door Opener Kit Include Air Wedge Bag Pump Professional Automotive Trim Removal Tool Suitable Car Unlock Set Kit for Most Cars.

【Car Lockout Kit】: Lockout kits for vehicles include 1pcs expert long reach grabber, 1pcs red non marring wedge, 2pcs airbag jack, 4pcs car panel door audio trim removal tool, 2pcs fastener remover pry tool..
【Long Reach Grabber】: The product is made of high quality solid stainless steel, sturdy and resistant to oxidation, the surface is smooth and not easy to curve. After assembly, fix one end and the other end will be tightened by turning clockwise, so that it will not loosen.The long reach tool car lockout helps you to open the car door and get the keys..
【Airbag Jack】: Airjack car opening kit contains two different sizes of products. It uses a double TPU reinforced airbag that can withstand high pressure. The air jack lockout kit ensures no damage to the door and is versatile.It will be a good help for you when you renovate your house.
【Trim Removal Tools】: Includes 4pcs car panel door audio trim removal tool, made of thick hard plastic, so that the removal will not pose harm to your car. 2pcs fastener remover pry tool, made of carbon steel design ergonomic, labor-saving and comfortable.Trim removal tools will not cause damage when removing car dashboards, stereos, etc..
【Ease of Use】: Lockout kits for vehicles are quick to assemb....

Check Stock

CoverON® Hard Rubberized Slim Case for Nokia Lumia 1520 – with Cover Removal Pry Tool – Hot Pink

Custom molded phone case to perfectly fit your device.
Made with High Quality shatter-proof hard plastic with a thin rubberized texture coating for improved grip and feel.
Precisely engineered to preserve full use of volume buttons, charger, camera, microphone, headphone jack, and all other ports.
under 2mm thick and weighs less than an ounce.
Includes CoverON case removal triangle pry tool.
easy to remove the case from your device – 90 Day Warrantee Included.

Check Stock

SOSS GAMING 2022 Headphone Jack Plug Port 3.5mm Headset Connector Port Socket for Xbox One Controllers - for Both Standard and S Models 1708 4 Pack

MONEY SAVER: Broken headphone jack? Don't worry! This kit is the perfect solution to make your Xbox One Controller working like new again. No need to....
EASY INSTALLATION - Replacement of your headphone jack could have never been easier. With so many YouTube tutorial videos out there, practically....
COMPATIBILITY - These bumpers are compatible with Xbox One Controllers Models 1708 that have the 3.5mm headphone jack equipped which includes the S....
PACKAGE INCLUDES - 4X Headphone Jacks, 1X T8 Torx Screwdriver, 1x T6 Torx Screwdriver, and 1X Prying Tool. All parts are high quality to get you back....
100% SATISFACTION GUARANTEE - We back our products! If you are not 100% satisfied with your purchase within 90 days, we will refund or send you a....

Check Stock

CoverON® Slim Hard Case for LG Optimus L70 Exceed 2 Realm Pulse Ultimate 2 L41C (Butterfly Heart)

Hybrid rugged heavy duty case is perfectly molded to fit snugly on your device.
made with a High Quality shatter-proof hard outer plastic shell and a semi-hard semi-flexible thermoplastic polyurethane (TPU) inner skin for the maximum protection you can give your phone.
Precisely engineered to preserve full use of volume buttons, charger, camera, microphone, headphone jack, and all other ports.
Easy installation, just attach the first layer then the second layer to your device.
Includes CoverON case removal triangle pry tool.
easily remove the case from your device – 90 Day Warrantee Included.

Check Stock

JUYEER Headphone Plug Extraction Tool - Customized Metal Tube Grip Stick Puller, Headphone Tip Removal Tool with Headphone Hole Cleaning Brush

✔️If this doesn't solve your problem, please feel free to contact us by email. You don't need to return the product, we can give you a full refund..
✔️PURPOSE: JUYEER headphone plug extraction tool is built specifically to easily remove broken 3.5mm headphone plugs from jacks. It can be used on 3.5mm jacks found on phones, laptops and any other devices. You can solve your problem within 20 seconds..
✔️HOW TO USE: Insert the steel tube between the headphone jack and a broken plug. You may need to lightly tap it in. It should go in about the same length as the headphone plug. Normally 0.55inch. Pinch with fingers or pliers for better grip. With broken plug enclosed, pull to remove..
✔️GUARANTEES: This tool considered to be a single-use tool. But if you can’t solve your problem with this tool, you can take a picture and send that to us. And then you can get a full refund without a return..
✔️Dear customers, the breakage of each earphone plug is different. We can't guarantee that this tool is suitable for all cases. Before you use this tool, please read the instructions carefully. Because the gap between the earphone plug and the earphone hole is very small, we have made the wall thickness of the tool as thin as we can. You need to plug....

Check Stock

CoverON® Hybrid Dual Layer Kickstand Case for LG Google Nexus 5 – with Cover Removal Pry Tool – Black Hard White Soft Silicone

Hard cover and soft flexible silicone skin hybrid dual layer case is custom molded to perfectly fit your device.
Made with a High Quality shatter-proof hard plastic shell and a soft flexible silicone skin for the maximum protection you can give your phone.
Precisely engineered to preserve full use of volume buttons, charger, camera, microphone, headphone jack, and all other ports.
A pop-out kickstand is attached on the back of the case for hands-free viewing of your device.
Includes CoverON case removal triangle pry tool.
easy to remove the case from your device – 90 Day Warrantee Included.

Check Stock

CoverON® Hard Slim Design Case for LG Optimus L70 Exceed 2 Realm Pulse Ultimate 2 L41C with Cover Removal Pry Tool - Teal Panda Polka Dot

Custom molded phone case to perfectly fit your device.
Made with High Quality shatter-proof hard plastic with a distinctive custom design.
Precisely engineered to preserve full use of volume buttons, charger, camera, microphone, headphone jack, and all other ports.
under 2mm thick and weighs less than an ounce.
Includes CoverON case removal triangle pry tool.
easy to remove the case from your device – 90 Day Warrantee Included.

Check Stock

Gold Plated Airplane Flight Headphone Adapters (Pack of 2) | Allows you to use your Earphones with all In-Flight Media Systems | This Airline Plane Headset Converter Enables Great Sound on all Planes

✅ The headphones dual adapter is versatile and functional since this audio cable adapter airplane is used as CONVERTER for your EARPHONES to let you CONNECT your own HEADSET to the IN-FLIGHT ENTERTAINMENT SYSTEM while on board. These flight adapters separate R and L sound channel and will make your trip more enjoyable because this headphone jack adapter airplane enables perfect audio quality for both music and movies. Quality wise, this headphone jack for airplane will never let you down..
✅ Do you want to USE YOUR OWN HEADSET IN FLIGHT but the audio sockets does not match? These AIRPLANE AUDIO CONVERTERS from Mobi Lock are perfect solution for you. These airline headphone socket adaptors is a functional audio adapter for airplanes and are designed with smaller rounded base to fit the 2-prong airline jack. Since MOST AIRCRAFTS DO NOT ACCEPT the standard headphone plug, YOU NEED an AIRLINE AUDIO ADAPTER and the two female headphone adapter to make your earpieces fit perfectly!.
✅ This headphone jack adapter has gold-plated sockets and the earphone headphone adaptor will provide you with perfect sound transfer. This adapter plug and double headphone plug CONVERT....

Check Stock

CoverON Sharp Aquos Crystal Premium Durable Rugged Shell Hybrid Protective Phone Case Cover with Built in Kickstand - Black Neon Green

Hard cover and soft flexible silicone skin hybrid dual layer case is custom molded to perfectly fit your device.
Made with a High Quality shatter-proof hard plastic shell and a soft flexible silicone skin for the maximum protection you can give your phone.
Precisely engineered to preserve full use of volume buttons, charger, camera, microphone, headphone jack, and all other ports.
A pop-out kickstand is attached on the back of the case for hands-free viewing of your device.
Includes CoverON case removal triangle pry tool.
easy to remove the case from your device û 90 Day Warranty Included - Compatible with Sharp Aquos....

Check Stock

PortPlugs Sim Card Removal Tool, Sim Card Ejection Tool Compatible with All iPhone, iPad, Samsung Galaxy and Android Brands, Universal Sim Tray Pin Tool Includes Free Cleaning Brush | 6 Pack, Silver

...ctor tools easily get lost, ours are 2.08” long.
small and lightweight enough for easy portability, but still large enough for quick location.
Bonus Cleaning Brush: Get our best-selling port cleaning brush without having to pay extra. The cleaning brush helps you get gunk and dust out of your charging port or headphone jack that causes poor connections and compromised performance..
Universal Compatibility: We’ve sized our cell phone Sim card tray opening tool to work with most smartphones. The Sim ejector pin is compatible with all Android phones including Samsung Galaxy, and all iPhones.
11, XS Max, X, 8, 8 Plus, 7, 7 Plus, 6, 6s, and more..
Versatile Design: This is more than just a Sim card needle opener set.
it’s also great for jewelry making and repair. Use the pin to adjust chain links on your watch or bracelet with ease. Click ‘Add to Cart’ now and start enjoying hassle-free SIM removal!.

Check Stock