Top Header Gaskets Sbc Reviews

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

1-1/8 inch width x 1-1/2" height Stock Square Port.
Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
Remflex exhaust gaskets fill those gaps permanently.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

Ultra 40 Custom Fit Wire Set, Blue Wire, Sleeved, SBC, Under Header/HEI.
8. 65mm diameter wire with 40 ohms of resistance per foot.
Sleeving adds extra dielectric strength which is wire’s ability to not be affected by outside electrical pulses.
Sleeving extends spark plug wire life and protects against exhaust header heat, chaffing and contaminants.

【Fitment】 Exhaust Collector Gaskets are especially designed for SBC BBC 302 350 454 383, and Fits all 3inch collector with Triangle (3 Bolt Pattern).
【Easy Installation】 Come with two gaskets for easy to install and operate, direct replacement for your old or broken one.
【Long-Lasting & Durable】 Exhaust Gaskets are made with top quality solid copper material for maximum durability, not easy to crack.
【Good Performance】 Reusable, no sealant required, good performance.
【Good After-Sales Service】 If you have any questions, please contact us in time, we will reply you and solve the problem within 24 hours.

1-1/4 inch width x 1-5/8 inch height Oval Port.
Chevy V8 -Small Block 262 - 400, 1-1/4" x 1-5/8" Oval Port, For Raised Weld Bead Headers , 2/Set.
additional sealing material is provided around the weld bead to provide a better seal.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
Port configuration comparable to Fel-Pro 1440.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, ('55 - '00), Round Port, Headers, 2/Set.
Port configuration comparable to Fel-Pro 1426.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.

1-3/8 inch width x 1-1/2 inch width Square Port - Matches the Stock cast iron Head Port.
Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Port, Manifold or Headers, 2/Set.
Port configuration comparable to Fel-Pro 1404.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.

Ultra 40 Custom Fit Wire Sets Red Wire, Unsleeved, SBC, Under Header/Non-HEI.
Cost-effective version of our race proven Ultra 40 Race Wire, without heat sleeving.
7mm or 8. 65mm diameter wire with 40 ohms of resistance per foot.
Complete, ready-to-install sets available for specific engines.

Ultra 40 Custom Fit Wire Set, Blue Wire, Sleeved, SBC, Over VC/HEI.
8. 65mm diameter wire with 40 ohms of resistance per foot.
Sleeving adds extra dielectric strength which is wire’s ability to not be affected by outside electrical pulses.
Sleeving extends spark plug wire life and protects against exhaust header heat, chaffing and contaminants.

Dynatech header flanges are of the highest quality for a great start to your exhaust header.
1/4 thick and CNC laser cut for a clean transition from the cylinder head port to the header tube.
This is made of mild steel for a strong long-lasting construction.
A great exhaust system starts at the beginning - the flange and gaskets.
A big Dynatech advantage is the wide selection of port matched flanges.

Available with 1-3/4” or 1-7/8” mandrel bent primary tubes and 2.50” collectors with merge spears for increased exhaust velocity.
3/8” thick header flanges for a leak-free seal.
2.50” V-band flanges and clamps for superior seal and even pressure at the flange.
Premium header gaskets and bolts included.
Designed for a variety of configurations (Up and Forward, Down and Forward, or Down and Back).

1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not.
Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent.

1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not.
Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent.