Top Hdpe Pipe Line Reviews

Premium USA Made 6' Inch Outdoor Round Atrium Drain Grate Cover - Fits All 6' Inch Sewer & Drain Pipe / Fittings, Also Fits Triple Wall Pipe & Corrugated Landscape Pipe 6' (Black)

  • FIT : Fits All 6" Inch Sewer & Drain Pipe / Fittings, Also Fits Triple Wall Pipe & Corrugated Pipe 6".
  • PREMIUM QUALITY - manufactured from a structurally foamed High Density Polyethylene (HDPE) with a UV inhibitor to reduce sun damage. This grate is designed with large opening slots for maximum flow while still preventing large debris from entering the drainage system. Capable of withstanding pedestrian, bicycle and wheelchair traffic..
  • EASY INSTALL - Precision engineered and manufactured to attach directly to Sewer and Drain Pipe and Fittings, Triple Wall Pipe and Corrugated Pipe. Easy to use, installs in minutes and blends well with the landscape..
  • FITS MOST BRANDS - COMPATIBLE WITH NDS, DURA, ETC..
  • APPLICATION - Typical application would be for direct attachment to Drainage Pipe where a catch basin is not appropriate or feasible. Available in 3″, 4″ and 6″ diameters..
  • ADA compliant - recommended for pedestrians, bicycles, and wheelchair traffic.
  • EXACT FIT: 6” Sewer Pipe (ASTM D3034, SDR 35), 6” S and D Pipe (ASTM D2729), 6” Corrugated Pipe, 6” S and D Fittings (SDR 35), 6” Round Catch Basin..
Check Stock

Car Hose Removal Plier Tool, Fuel Vacuum Tube Pliers Hose Removal Tool, Fuel and Vacuum Line Remover Separator Pliers Pipe Repairing Tool

  • Hose Removal: This line and pipe separator pliers is mainly used to remove stubborn hoses on heater water tanks, radiators, pumps, air filters, etc..
  • Durable Material: This line and pipe separator pliers are made of steel, sturdy and durable, not easy to damage.
  • Strong Practicability: This line pipe separator pliers has a compact design and strong practicability.
  • Comfortable Handle: This line pipe separator pliers is designed according to ergonomic principles, and the rubber-coated handle is labor-saving and comfortable to use.
  • Applicable Size: This line and pipe separator is suitable for removing fuel, vacuum or heater hoses with a diameter of 5/32 inches to 1/2 inches (4mm to 14mm).
Check Stock

Disconnect Tongs Tool with Depth Gauge and Pipe Deburring Tool Combination Set for Push to Connect Fittings Removal Tool for Disconnect Clamp for 1/2",3/4",1" Plastic PEX CPVC Copper Pipe Fittings

  • 【Package Includes】1 pcs disconnect tongs tool.
  • 1 pcs deburr &gauge tool .the disconnect tongs have 3 size teeth available, can easily remove the push fit fitting from pex, cpvc or copper pipe of 1/2 inch, 3/4 inch or 1 inch.it can deburr the cut end of the pipe & bevel the cut edge, ensure complete seal and smooth connection..
  • 【Quality Material】the push to connect fittings removal tool is made of 40cr steel and tpr coated grips prevent slippage in wet conditions and one-handed operation for in-tight situations.good grips, hefty build to allow your free hand the ability to assist in the removal of fittings..
  • 【Deburr and Gauge Tool】 deburring tool is made of lightweight and durable pvc.ideal for marking pipe depth and deburring..deburring tool is compatible with 1/4 to 1 inch sized pex, copper, cpvc, pe-rt and sdr-9 hdpe pipe.
  • 【Fast Disconnection】 simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly. deburring pipe and depth gauge tool, easy measure insertion depth and deburring pipe after pipe is inserted..
Check Stock

LFS Sport Netting #42 HDPE Batting Cage Net - 12' x 12' x 70'

  • Exceptional quality baseball or softball batting cage nets for use in all environments, indoors or out, nets will give you years of enjoyment..
  • #42 HDPE knotted netting with 218 LB. break strength..
  • Made with twisted knotted #42 HDPE netting for maximum UV and abrasion resistance..
  • A 3/8” HDPE over lock stitched border rope on all edges, and center roof support line, with convenient 6’ rope tails on each end for easier suspending..
  • All cages have a 4 ft. overlapping entry door with rope borders on one end for easy entry..
Check Stock

SharkBite 3/4-Inch Tee, Push-to-Connect, PEX, Copper, CPVC

  • INSTALLS IN SECONDS: 3/4-inch tee pipe connector requires no soldering, crimping, or glue–just push to create a watertight seal.
  • VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination.
  • COMPATABILITY: Same as part numbers U370LFZ and U370LF.
  • QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections.
  • SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check Stock

MECCANIXITY Petrol Fuel Line Hose 3/16\ x 5/16\ 3.3ft Blue for Chainsaws Lawn Mower String Trimmer Blowers Small Engines

  • Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for chainsaws, string trimmers, blowers, lawnmowers, etc..
  • Fuel line hose, is in size of : 3.3ft long, 3/16-inch x 5/16-inch(5mm x 8mm)(ID. x OD.), 1/16-inch(1.5mm) wall thickness.
  • The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment. It is a good replacement for the fuel pipe on the engine.
  • Steps of installation: 1.Prepare a fuel line hose.
  • Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.
Check Stock

MECCANIXITY Petrol Fuel Line Hose 3/16\ x 3/8\ 3.3ft Yellow for Chainsaws Lawn Mower String Trimmer Blowers Small Engines

  • Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for chainsaws, string trimmers, blowers, lawnmowers, etc..
  • Fuel line hose, is in size of : 3.3ft long, 3/16-inch x 3/8-inch(4.5mm x 9.3mm)(ID. x OD.), 3/32-inch(2.4mm) wall thickness.
  • The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment. It is a good replacement for the fuel pipe on the engine.
  • Steps of installation: 1.Prepare a fuel line hose.
  • Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.
Check Stock

SharkBite 1/2-Inch Tee, 1/2 Inch, Push-to-Connect, PEX, Copper, CPVC

  • INSTALLS IN SECONDS: 1/2-inch tee pipe connector requires no soldering, crimping, or glue–just push to create a watertight seal.
  • VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination.
  • COMPATABILITY: Same as part numbers U362LFZ and U362LF.
  • QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections.
  • SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check Stock

RIDGID 19238 NaviTrack Scout Locator, Underground Pipe Locator and Underground Cable Location Device & 16728 Remote Transmitter (512 Hertz Sonde) for Underground Pipe Location,Red/Black,Small

  • Product 1: Multi-directional antenna technology sees the entire signal all of the time - maximize the signal strength to find the target pipe, sonde, or energized line.
  • Product 1: Underground pipe locator verifies position using a micro-mapping display to mark distinctive poles in front of and behind the target, ensuring an accurate locate.
  • Product 1: When using as underground cable locator or pipe locator, the Navitrack Scout automatically calculates and displays depth when oriented over the target..
  • Product 1: Meets FCC Class B and EN 55022 Class B - operates in these standard frequencies: Sonde - 16 Hz, 512 Hz, 640 Hz, 874 Hz and 33 kHz.
  • Line Trace - 128 Hz, 1 kHz, 8 kHz and 33 kHz.
  • Product 2: Attach remote transmitter to drain cleaning cable or a water jet hose to locate pipe underground.
  • Product 2: Flashing LED to indicate that sonde is transmitting and ready to operate as a beacon during underground pipe location.
  • Product 2: Meets FCC Class B and EN 55022 Class B requirements.
  • Product 2: Adapters (catalog # 19263, 19268, 19273, and 19258) attach transmitter to drum machine or sectional cables provide versatility in locating underground pipe and line detection.
Check Stock

MECCANIXITY PVC Petrol Fuel Line Hose 3/16 x 5/16 16ft Pink for Chainsaws Lawn Mower String Trimmer Blowers Small Engines

  • Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for....
  • Fuel line hose, is in size of : 5mm/0.2-inch inner dia, 8mm/0.31-inch outer dia, 1.5mm/0.06-inch wall thickness, 5m/16ft total length.
  • The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment.....
  • Steps of installation: 1.Prepare a fuel line hose.
  • Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.
Check Stock

10' x 10' x 55' Baseball Batting Cage Net - #42 Heavy Duty Net [Net World Sports] 24hr Shipping

  • Exceptional quality baseball or softball batting cage nets for use in all environments, indoors or out, nets will give you years of enjoyment..
  • #42 HDPE knotted netting with 218 LB. break strength..
  • Made with twisted knotted #42 HDPE netting for maximum UV and abrasion resistance..
  • A 3/8” HDPE over lock stitched border rope on all edges, and center roof support line, with convenient 6’ rope tails on each end for easier suspending..
  • All cages have a 4 ft. overlapping entry door with rope borders on one end for easy entry..
Check Stock

Genuine OEM Engine Coolant Thermostat Kit For BMW E60 E61 E82 E83 E85 E86 E88 E89 E90 E91 E92 E93 F30 1 3 5 X Z Series 3.0L L6

  • Fit for: BMW E46 E39 E36 E85 Z3 Z4 320i 323i 325i 328i 330i 525i 528i 530i. More detailed compatibilities please see Product Description..
  • A leaking heater pipe line is not only aA coolant pipe is a hard plastic line used to transport coolant between cooling system components. It is usually attached on both ends by coolant hoses, and the coolant pipe can, in some cases, act as a junction to split coolant to other parts. Often, a coolant pipe may be connected between the radiator and water pump, or between the water pump and the heater core..
  • A leaking heater pipe line is not only a waste of engine heat but also a cause of engine damage. Together with the heater hoses, this pipe line is where heated coolant passes through to eventually warm your cabin during winter months. If this pipe or tube is damaged, your coolant level will deplete quickly, thus resulting to heater malfunction and a steaming engine..
  • Please be sure to compare carefully with Pictures or OE number before buying items. If you are not s....
Check Stock

SharkBite 3/4 Inch Polybutylene Transition Coupling, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U4016LF

  • SHARKBITE BRASS PUSH POLYBUTYLENE TRANSITION COUPLING: Polybutylene transition couplings are used to perfectly transition from a polybutylene pipe to another pipe.
  • remove using a disconnect clip or disconnect tongs.
  • COMPATIBILITY: Color-coordinated collars on the ends of the fittings identify which side goes with which pipe.
  • gray collar end works with polybutylene pipe.
  • tan collar end is compatible with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • EASY TO INSTALL: The SharkBite brass transition coupling features a push-to-connect mechanism for a watertight union, and allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this transition coupling can withstand 200 degrees F and 200 PSI.
Check Stock