Top Hdpe Pipe Extrusion Lines Reviews

Hromee Compressed Air Piping System with 3\\/4 inch x 100 feet HDPE Tubing and Aluminum Outlet Blocks for Garage Connect Air Compressor Hose Accessories 37 Pieces

  • FAST INSTALL - Plan to locate your air compressor and compressed air outlets before installtion. The tubing is can be installed in the wall or hanging from the ceiling with tubing clips. A cutter and fittings are ready. Only a wrench is needed to tight the connection..
  • LEAK-LESS - High-density polyethylene(HDPE), a layer of aluminum is sandwiched between layers of HDPE, is extremely ductile, lightweight and corrosion resistant. And it has a smooth surface, which reduces the energy to push compressed air through the compressed air system. Above of all, it will keep pressure while running for long time. Operating Pressure: 200PSI at 73℉and 160PSI at 140℉..
  • EASY TO CONNECT - No glue, soldering or crimping needed. L-shaped and T-shaped fittings are equipped in the kit for different tubing extending directions. Double O-ring compression style ensures 100% sealing in high working pressure..
  • FLEXIBLE - Do not need to worry about elbows because HDPE tubing is flexible enough to be bent to any shape. The 3/4-inch inside diameter of the pipe has a bend radius of 6-8 inches. 100 Feet continuous pipe lengths which means less leak points. Inner Diameter: 3/4”.
  • EASY TO MODIFY - It’s convenient and low-cost to expand or make anoth....
Check Stock

Premium USA Made 6' Inch Outdoor Round Atrium Drain Grate Cover - Fits All 6' Inch Sewer & Drain Pipe / Fittings, Also Fits Triple Wall Pipe & Corrugated Landscape Pipe 6' (Black)

  • FIT : Fits All 6" Inch Sewer & Drain Pipe / Fittings, Also Fits Triple Wall Pipe & Corrugated Pipe 6".
  • PREMIUM QUALITY - manufactured from a structurally foamed High Density Polyethylene (HDPE) with a UV inhibitor to reduce sun damage. This grate is designed with large opening slots for maximum flow while still preventing large debris from entering the drainage system. Capable of withstanding pedestrian, bicycle and wheelchair traffic..
  • EASY INSTALL - Precision engineered and manufactured to attach directly to Sewer and Drain Pipe and Fittings, Triple Wall Pipe and Corrugated Pipe. Easy to use, installs in minutes and blends well with the landscape..
  • FITS MOST BRANDS - COMPATIBLE WITH NDS, DURA, ETC..
  • APPLICATION - Typical application would be for direct attachment to Drainage Pipe where a catch basin is not appropriate or feasible. Available in 3″, 4″ and 6″ diameters..
  • ADA compliant - recommended for pedestrians, bicycles, and wheelchair traffic.
  • EXACT FIT: 6” Sewer Pipe (ASTM D3034, SDR 35), 6” S and D Pipe (ASTM D2729), 6” Corrugated Pipe, 6” S and D Fittings (SDR 35), 6” Round Catch Basin..
Check Stock

Bar5F Empty Spray Bottle, 16 Ounces, Pack of 2

  • Our trigger sprayer is made from plastic resin that’s both stiff and flexible, with high impact strength.
  • Patented no leak venting system provides tight and secure closure for both cap and spray head, dip tube filter comes standard to prevent clogs.
  • The nozzle is designed to give you an extra grip and easily adjusts to the needed output, from the finest mist to a stream.
  • The trigger is ergonomically designed, it practically becomes an extension of your hand, which makes your job easier.
  • The bottle is heavy-duty HDPE resin, extra thick wall extrusion process suitable and chemically resistant to harsh chemicals and solvents.
Check Stock

SharkBite 1 Inch Tee, Pack of 3, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U374LF

  • SHARKBITE BRASS PUSH TEE: This push-to-connect fitting can be used when joining pipes of the same sizes quickly and easily.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass push tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • approved for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this push tee can withstand 200 degrees F and 200 PSI.
Check Stock

JOR Aquarium Siphon, Fish Tank Gravel Cleaner Kit, for Small Fish Tanks and Aquarium, 65-inches

  • ✔【Multifunctional Fish Tank Cleaner】This aquarium gravel cleaner integrates gravel cleaning, sand washing, water changer, and dirt suction functions. Composed of excellent PVC water pipe and ABS siphon head, it is resistant to extrusion, not easy to scratch and damage, and can be used for a long time. It can help you to achieve efficient cleaning of the fish tank, and there is no need to immerse your hands in water when using it!.
  • ✔【Safe Manual Design】Compared with most electric fish tank cleaning tools, this manual fish tank gravel cleaner is not electrified and will not harm your beloved fish during use. The manual design can also help you better control the pressure and water flow , So it is simpler, safer, and noiseless. In addition, the built-in 3D filter plug can effectively prevent your small fish, gravel and water plants from being sucked out..
  • ✔【Simple Working Principle】The principle of this aquarium siphon gravel cleaner is gravity, so the water outlet must be at least 19.7 inches lower than the water inlet when in use. The air-pressing button can produce a strong siphon after being pressed, so press the button several times until the water fills the entire inlet pipe, then release the button, and the water will flow out aut....
Check Stock

Disconnect Tongs Tool with Depth Gauge and Pipe Deburring Tool Combination Set for Push to Connect Fittings Removal Tool for Disconnect Clamp for 1/2",3/4",1" Plastic PEX CPVC Copper Pipe Fittings

  • 【Package Includes】1 pcs disconnect tongs tool.
  • 1 pcs deburr &gauge tool .the disconnect tongs have 3 size teeth available, can easily remove the push fit fitting from pex, cpvc or copper pipe of 1/2 inch, 3/4 inch or 1 inch.it can deburr the cut end of the pipe & bevel the cut edge, ensure complete seal and smooth connection..
  • 【Quality Material】the push to connect fittings removal tool is made of 40cr steel and tpr coated grips prevent slippage in wet conditions and one-handed operation for in-tight situations.good grips, hefty build to allow your free hand the ability to assist in the removal of fittings..
  • 【Deburr and Gauge Tool】 deburring tool is made of lightweight and durable pvc.ideal for marking pipe depth and deburring..deburring tool is compatible with 1/4 to 1 inch sized pex, copper, cpvc, pe-rt and sdr-9 hdpe pipe.
  • 【Fast Disconnection】 simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly. deburring pipe and depth gauge tool, easy measure insertion depth and deburring pipe after pipe is inserted..
Check Stock

SharkBite 3/4-Inch Tee, Push-to-Connect, PEX, Copper, CPVC

  • INSTALLS IN SECONDS: 3/4-inch tee pipe connector requires no soldering, crimping, or glue–just push to create a watertight seal.
  • VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination.
  • COMPATABILITY: Same as part numbers U370LFZ and U370LF.
  • QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections.
  • SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check Stock

Pipe Center Finder, Pipefitter Tools w/Centering Head, Pipe Fitting Tools Center Finder Tool to Measure Pipe Diameter Over 0.5" and Up, 4" Y-Type Base Fitted with Adjustable Dial Bubble Protractor.

  • 【Economical Measuring Tool】This Pipe Marker Centering Tool is efficient and useful for setting center lines, determining angles and marks for butt-ins and locating points inside pipes or tanks, arranging keyways and calculating declivity. It can measure tanks or pipes with a diameter of at least 1/2" or larger..
  • 【Easy to Operate】Step1.Loosen or tighten the hexagonal nut with the included hex key allen wrench. Step2.Place the pipe marker tool on the pipe and find the angle you want. Step3.Push the center column down to the fixed point position. Step4.Tap with a hammer to leave a fixed point mark on the pipe..
  • 【Durable and Sturdy Material】The pipe fitter tool can wrap around the circumference of pipes to measure and mark, and it is made of a highly flexible, heat-resistant gasket material. This Pipe Center Finder Tool is easy to use for pipe fitters and welders as a must have tool..
  • 【Y-Head Shape Base with a DSL】This safety pipe center finder has a 4 inch Y-type base fitted with an adjustable dial bubble protractor (DSL). You could push the center column down to the fixed point position as you want. It is a must have on your list of pipe welding tools..
  • 【Adjustable Dial Bubble Protractor】Printed with a scale in inches, an inch chart and....
Check Stock

SharkBite 3/4 Inch x 1/2 Inch Reducing Coupling, Pack of 12, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U058LF

  • SHARKBITE BRASS PUSH REDUCING COUPLING: This push-to-connect fitting allows you to make a connection between two different-sized pipes in any combination.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The SharkBite brass reducing couplers allow for easy installation, with no tools, crimping, glue, or soldering required.
  • can be installed in wet lines and approved for underground and behind-the-wall applications with no access panels.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • SPECS: Made with DZR forged brass, this brass reducing coupling can withstand 200 degrees F and 200 PSI.
Check Stock

SharkBite 1/2-Inch Tee, 1/2 Inch, Push-to-Connect, PEX, Copper, CPVC

  • INSTALLS IN SECONDS: 1/2-inch tee pipe connector requires no soldering, crimping, or glue–just push to create a watertight seal.
  • VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination.
  • COMPATABILITY: Same as part numbers U362LFZ and U362LF.
  • QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections.
  • SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check Stock

SharkBite 3/4 Inch x 3/4 Inch x 1/2 Inch Reducing Tee, Pack of 6, Push To Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U412LF

  • SHARKBITE BRASS PUSH REDUCING TEE: This push-to-connect fitting can be used when joining two different-sized pipes quickly and easily.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing tees work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass reducing tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this reducing tee can withstand 200 degrees F and 200 PSI.
Check Stock

SharkBite 1 Inch x 300 Feet White PEX-B, PEX Pipe Flexible Water Tubing for Plumbing, U880W300

  • SHARKBITE WHITE PEX-B PIPE: This SharkBite white PEX-B pipe is available in coils up to 1,000 feet in length, allowing longer runs and fewer connections to save time, money, and potential leak points.
  • FREEZE RESISTANT: This flexible PEX tubing expands and contracts as water freezes and thaws within the pipe.
  • ideal for hot and cold potable water distribution, fire protection, and municipal water service lines.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass PEX water tubing offers faster installation compared to rigid pipe, six-month UV resistance, and the highest-rated chlorine resistance.
  • PREFERRED BY THE PRO: This portable PEX pipe is certified to meet ASTM F2023 oxidative-resistance requirements for continuous hot water recirculation.
  • approved for water service lines and burial applications including being buried under concrete.
  • SPECS: SharkBite water pipe tubing features a minimum working temperature of 33 degrees F at 160 PSI, a maximum working temperature of 200 degrees F at 80 PSI, and a maximum working pressure of 160 PSI at 33 to 70 degrees F.
Check Stock

HEATIT JHSF1 Self Regulating Pre-Assembled Heating Cable 75-feet 120V Roof deicing and Pipe freeze Protection

  • 6 ft. water pipe heating cable, 42 watt, black color.
  • Stops metal and rigid plastic pipes from freezing down to -40°F — built-in thermostat automatically turns heating on when pipe temperature is below 42.8° F (close to freezing) and turns heating off once pipe is warmed to 55.4° F (well above freezing).
  • A single 6 foot heating cable is suitable for 6 foot to 8 foot long pipes that are 3/8 inches to 3/4 inches in diameter, or for 6 foot long pipes that are 1 to 1-1/2" in diameter. NOTE: Use only for water filled plastic (including PEX) or metal pipes. Not for use with anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines, and so on..
  • Features grounded plug with indicator light.
  • Pre-assembled, easy to install using the included instructions. Materials required (not included) are: aluminum foil (recommended for plastic pipe), fiberglass plumbing pipe insulation, fiberglass tape or similar with temperature rating 175° F or higher..
Check Stock