Top Hdpe Pex Pe rt Ppr Reviews

SharkBite 1/2-Inch Tee, 1/2 Inch, Push-to-Connect, PEX, Copper, CPVC

  • INSTALLS IN SECONDS: 1/2-inch tee pipe connector requires no soldering, crimping, or glue–just push to create a watertight seal.
  • VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination.
  • COMPATABILITY: Same as part numbers U362LFZ and U362LF.
  • QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections.
  • SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check Stock

SharkBite 22187-0000LFA Ball Valve 1 Inch x 1 Inch, Water Valve Shut Off, Female, FNPT, Push-to-Connect, PEX, Copper, CPVC, PE-RT

  • INSTALLS IN SECONDS: 1 inch ball water valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
  • PERFORMANCE: 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating Applications..
  • COPPER, PEX, CPVC, PE-RT: SharkBite Ball Valve plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All SharkBite PEX pipe tubing meets the same standards for commercial and residential plumbing applications.
Check Stock

Sharkbite 24632LF 45° Hose Bibb 1/2" x 3/4" Multi Turn

  • INSTALLS IN SECONDS: 1/2 inch x 3/4 inch threaded hose bibb valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
  • PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications.
  • COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

SharkBite 1 Inch Ball Valve, Push to Connect Brass Fitting, Water Shut Off, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 22223-0000LFA

  • INSTALLS IN SECONDS: Requires no special tools, no soldering, no crimping or glue.
  • COPPER, PEX, CPVC, PE-RT: Brass SharkBite Ball Valve plumbing fittings fit Copper, plastic PEX tubing, CPVC and PE-RT Pipe and connects them in any combination.
  • PERFORMANCE: SharkBite shutoff valves are are heavy duty and certified to sustain a pressure of 200 PSI and 200 degrees Fahrenheit.
  • QUALITY: Only SharkBite's quality and performance is field-proven.
  • PREFERRED BY THE PRO: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

SharkBite 1 Inch Tee, Pack of 3, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U374LF

  • SHARKBITE BRASS PUSH TEE: This push-to-connect fitting can be used when joining pipes of the same sizes quickly and easily.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass push tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • approved for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this push tee can withstand 200 degrees F and 200 PSI.
Check Stock

SharkBite U3088FLEX18LF Flexible Water Heater Connector, 3/4-Inch x 3/4-Inch x 18-Inch length

  • INSTALLS IN SECONDS: Water hose connectors require no special tools, no soldering, or glue. Just push to create a watertight seal.
  • COPPER, PEX, CPVC or PE-RT: SharkBite water heater plumbing fittings fit OD controlled copper, PEX, CPVC and PE-RT. Use for both hot and cold water supply lines.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F and can be reused up to four times.
  • RESIDENTIAL and COMMERCIAL: SharkBite Water Heater Supply Connectors meet the same standards for commercial and residential plumbing applications. Inspector friendly for a peace of mind..
Check Stock

SharkBite 3/4 x 3/4 Inch Ball Valve with FNPT Connector, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 22186-0000LF

  • INSTALLS IN SECONDS: Requires no special tools, no soldering, no crimping or glue.
  • COPPER, PEX, CPVC, PE-RT: Brass SharkBite Ball Valve plumbing fittings fit Copper, plastic PEX tubing, CPVC and PE-RT Pipe and connects them in any combination.
  • PERFORMANCE: SharkBite shutoff valves are are heavy duty and certified to sustain a pressure of 200 PSI and 200 degrees Fahrenheit.
  • QUALITY: Only SharkBite's quality and performance is field-proven.
  • PREFERRED BY THE PRO: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

SharkBite 3/4 Inch x 1/2 Inch Reducing Coupling, Pack of 12, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U058LF

  • SHARKBITE BRASS PUSH REDUCING COUPLING: This push-to-connect fitting allows you to make a connection between two different-sized pipes in any combination.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The SharkBite brass reducing couplers allow for easy installation, with no tools, crimping, glue, or soldering required.
  • can be installed in wet lines and approved for underground and behind-the-wall applications with no access panels.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • SPECS: Made with DZR forged brass, this brass reducing coupling can withstand 200 degrees F and 200 PSI.
Check Stock

SharkBite 25087 Faucet Installation Kit, Angle Stop, Plumbing Fitting Quarter Turn, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT

  • INSTALLS IN SECONDS: Shark Bite Faucet Installation Kit requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
  • PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications.
  • COPPER, PEX, CPVC, PE-RT: Shark Bite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
  • QUALITY: Only Shark Bite’s quality and performance is field-proven with more than 550 million connections. Shark Bite is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All Shark Bite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

SharkBite 3/4 Inch x 3/4 Inch x 1/2 Inch Reducing Tee, Pack of 6, Push To Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U412LF

  • SHARKBITE BRASS PUSH REDUCING TEE: This push-to-connect fitting can be used when joining two different-sized pipes quickly and easily.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing tees work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass reducing tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this reducing tee can withstand 200 degrees F and 200 PSI.
Check Stock

SharkBite 1 Inch x 3/4 Inch MNPT Reducing Adapter, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U142LF

  • SHARKBITE BRASS PUSH MALE REDUCING ADAPTER: This push-to-connect fitting allows you to make a transition between a pipe and an FNPT thread quickly and easily.
  • ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**.
  • VERSATILE: Pushfit male reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite push male reducing adapters allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • approved for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this reducing adapter can withstand 200 degrees F and 200 PSI.
Check Stock

SharkBite 1/4 Inch to 1 Inch Depth Gauge and Pipe Deburring Tool, Copper, PEX, CPVC, PE-RT, HDPE, U702A

  • SHARKBITE BRASS PUSH DEPTH GAUGE AND DEBURRING TOOL: SharkBite depth gauge and pipe deburring tool is ideal for deburring the outside of a copper pipe to remove any sharp sections or burrs.
  • marks the proper insertion depth for SharkBite plumbing fittings.
  • COMPATIBILITY: Deburring tool is compatible with 1/4 to 1-inch-sized PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • DURABLE: PVC deburring tool is composed of lightweight and durable plastic.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

SharkBite 1/2 Inch Ball Valve, Push to Connect Brass Plumbing Fitting, Water Shut Off, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 22222-0000LFA

  • INSTALLS IN SECONDS: 1/2 Inch ball water valve requires no special tools, no soldering, no crimping or glue.
  • push-to-connect design provides an efficient application that saves time and money.
  • VERSATILE: Shark Bite Ball Valve plumbing fittings fit Copper, PEX, CPVC, PE-RT, and HDPE Pipe and connects them in any combination.
  • PERFORMANCE: SharkBite shutoff valves are are heavy duty and certified to sustain a pressure of 200 PSI and 200 degrees Fahrenheit.
  • QUALITY: Only SharkBite's quality and performance is field-proven.
  • PREFERRED BY THE PRO: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock