Top Hdd Installation Kit Reviews

SSD Metal Mounting Bracket Kit, 2.5 to 3.5 Hard Drive Adapter, Compatible with Any 2.5 to 3.5 Drive Bay, with SATA Data Transfer Cable and SATA Power Cable

  • Features: For 2.5" to 3.5" Mounting Bracket Kit, mounts 2 x 2.5" drives simultaneously, Compatible with all types of 2.5" Hard Disk Drives (HDD/SSD) and fits all PC enclosures..
  • Expand space: Convert 2 x 2.5" hard drives to 3.5" drive bays with this bracket, take advantage of the extra space inside the PC case..
  • Included gifts: 1 screwdriver, 18 screws, 14-pin to dual 15-pin SATA power cable, 1 15-pin to dual 15-pin SATA power cable, 2 SATA data cables as a warm gift for you..
  • backward compatible with SATA I & II for fast, glitch-free data and power transfer..
  • Easy to install: Precise mounting holes, easy installation make the inside of the computer more tidy, SHY SPRUCES SSD/HDD Bracket Kit comes with a 2-year quality guarantee and 24-hour friendly customer service..
Check Stock

Geekworm T300 2.5 inch SATA SSD/HDD Shield Storage Expansion Board+T300 Metal Case Compatible with NVIDIA Jetson Nano Developer Kit(A02&B01)

  • Geekworm 2.5" SATA HDD/SSD storage board compatible NVIDIA Jetson Nano A02/B01/2GB/4GB that supports up to 4TB 2.5-inch SATA hard disk drives (HDD) or solid-state drive (SSD), User manual, refer to Geekworm WiKi search T300..
  • T300 Metal Case with Power & Reset Switch & Camera Holder Compatible with NVIDIA Jetson Nano Developer Kit (A02 & B01) and T300 2.5 inch SATA SSD/HDD Shield.
  • WiKi for reference: wiki.geekworm.com/T300.
  • A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down. THIS IS VERY IMPORTANT!! Strongly recommend ASIN: B07413Q5Y4.
  • Equipped with power switch and reset switch, and it's reserve the GPIO hole and the installation space of the fan, recommend to use this Noctua NF-A4x20 5V PWM fan, refer to ASIN: B071FNHVXN, you can also use this 5V 4007 cooling fan (ASIN: B07WNH6Y8Y ).
Check Stock

Phanteks PH-ES813P_WT Enthoo Series Primo Aluminum ATX Ultimate Full Tower Computer Case White

  • Enthoo Primo includes 1x140mm fan on top, 2x140mm LED fans in front, 1x140mm fan in the rear, & 1x140mm fan on the bottom. Ability to upgrade to....
  • Dual repositionable and removable HDD cages (support up to 6 HDD's) for more installation flexibility or unrestricted airflow.
  • Closed HDD panel strengthens the chassis' rigidity, even when both HDD cages are removed..
  • Removable Drop-n-Lock Doublestack SSD brackets that can be installed on 3 different locations. (2 brackets incl.).
  • Removable front and top covers for easy installation of cooling components and easy dust filter removal..
Check Stock

Reletech 2.5\ External Hard Drive Enclosure, SATA to USB 3.1 Tool-Free Clear for 2.5 Inch SSD & HDD 9.5mm 7mm External Hard Drive Case Supports UASP SATA

  • 2.5" External Hard Drive Enclousre: Easily connects your 2.5 inch SSD & HDD to PC, laptop, PS4, Xbox for data transfer or expanding storage. It protects the hard disk from outside scratches and makes SATA hard drive portable for data store. It is awsome for booting up old hdd/ssd and recovering important files of broken PC..
  • Universal Compatibility: Supports Windows, LINUX, Mac OS 8.0 and above systems. Designed for 2.5 inch 7mm/9.5mm SATA HDD & SSD up to 2TB..
  • Easy Installation: Tool free installation. Plug & Play, No driver needed for this SATA enclosure. Just push out the cover, plug in the drive, close the cover and go. Hot-swap supported. No request for extra power supply.( Note: Some 2.5-inch HDD require 12v voltage input, this product only supports 5v output to the HDD, please check before using.).
  • 5Gbps UASP Fast Speed: The Reletech ssd/hdd drive enclosure is design with SATA to USB3.0 protocol with the maximum transfer rate can reach up to 5Gbps, at the same time, the external hdd enclosure can support UASP accelerated transmission protocol to greatly improving the storage or backup efficiency of the devices..
  • Package included: 1*2.5 inch hard drive enclosure, 1* micro B to usb 3.0 cable..
Check Stock

Cooler Master RC-130-KKN1 Elite 130 - Mini-ITX Computer Case with Mesh Front Panel and Water Cooling Support

  • Meshed front panel for increased intake of ambient cool air.
  • Supports Mini-ITX motherboards for small profile builds.
  • Unique HDD/SSD mounting bracket positioning allows more space inside.
  • Supports 120 mm water cooling kit at the front of the case.
  • Supports 120 mm water cooling kit at the front of the case thanks to HDD/SSD mounting style.
  • Supports standard ATX PS2 sized power supplies.
Check Stock

Yottamaster Aluminum Alloy 2 Bay 3.5 inch USB3.0 Hard Drive RAID External Array Enclosure for SATA HDD 2 x 10TB Support & UASP,Mac Style Designed for Personal Storage at Home&Office- [PS200RU3]

  • ...te】This dual bay hdd enclosure adopt USB3.0 protocol, transfer rate up to 6Gbps (MAX). Equipped with a versatile USB3.0 Type-B interface to connect other peripheral devices. Compatible with most Windows, Mac and Linux systems..
  • 【For 2,5/3,5-inch Hard Drives】It comes with two removeable trays, allowing for easy installation and replacement of either the large desktop hard disk drives or the portable laptop drives and SSD's. Note: Spare trays are sold separately in a set of six trays, extra screws are provided, Get it at ASIN:B083S8VDQK. Two indicator lights help you to monitor the working status of your hard drives whenever..
  • 【What you will get】 1x 2 bay USB3.0 RAID hdd enclosure.
Check Stock

Geekworm X832-C1 Metal Case Compatible with Raspberry Pi 4 & X832 V1.2 3.5 SATA Storage Board & X735 Power Management Board Not Support X832 V1.0/X835

  • [HDD thickness]Support Max. 26.1mm thickness 3.5" SATA HDD installation, support 17.8mm & 26.1mm 3.5" SATA HDD.
  • Case Dimensions(Installation): 168x104x75mm / 6.61x4.09x2.95(inch).
  • We do not open the TF card slot on the front for....
  • When use with X735 board, the power supply MUST only be connected to X832 DC5521 12V IN port NOT X735..
  • Packing List: 1x X832-C1 metal case for X832 V1.2, 1x power control switch,1x cooling fan, 1x Installation screws pack.
Check Stock

Phanteks Enthoo Series Primo Aluminum ATX Ultimate Full Tower Computer Case PH-ES813P_BL,Black/Blue

  • Enthoo Primo includes 1x140mm fan on top, 2x40mm LED fans in front, 1x140mm fan in the rear, and 1x140mm fan on the bottom. Ability to upgrade to additional fans are possible. All fans included are Phanteks' new redesigned and better performing PH-F140SP..
  • Clean & elegant design that can be recognized by the refined aluminum front & top panels. Controllable LED lighting (LED strip & Fan LED)..
  • Dual repositionable and removable HDD cages (support up to 6 HDD's) for more installation flexibility or unrestricted airflow. Closed HDD panel strengthens the chassis' rigidity, even when both HDD cages are removed..
  • Removable Drop-n-Lock Double stack SSD brackets that can be installed on 3 different locations. (2 brackets incl.) Removable front and top covers for easy installation of cooling components and easy dust filter removal..
  • Other removable dust filters r located in the bottom(2x) & side panel(2x). Pre-installed cable management tools behind the motherboard tray that can be fastened & released..
Check Stock

FIDECO Hard Drive Docking Station, USB 3.0 SATA HDD Docking Station for 2.5 & 3.5 inch SATA HDD/SSD, Dual Bay, Support Offline Clone and 2X 16TB Hard Drives

  • 【Universal Compatibility】FIDECO SATA HDD docking station is universally compatible with Windows XP/ Vista/ 7/ 8 /8.1/ 10/ Mac OS/ Linux. Please note that it only supports SATA HDD/SSD..
  • 【USB 3.0 Super Speed】FIDECO hard drive docking station supports USB3.0 super fast data transfer speed with rates up to 5Gbps..
  • 【Offline Clone】FIDECO docking station supports offline clone! You just need to insert 2 HDDs into the respective station bays and press the “Clone” button for 5 seconds until the LED indicator flashes. The clone can be completed with no computer needed!.
  • 【32TB Capacity】FIDECO HDD docking station can support 2x 16TB hard drive simultaneously for 2.5/3.5 inch SATA I/II/III HDD/SSD with exquisite design. Absolutely no driver needed and tool-free installation..
  • 【FIDECO HDD Docking Station】FIDECO docking station provides an easy way to add HDD/SSD to your computer. It offers you the flexibility of connecting two 2.5″/3.5″ SATA HDD/SSD to your computer. Plug and play!.
Check Stock

Yottamaster Aluminum Alloy 3.5 USB3.0 2 Bay External Hard Drive Enclosure for 3.5 Inch SATA HDD Support 2 x 10TB & UASP -Silver,Mac Style Designed for Personal Storage at Home&Office- [PS200U3]

  • 【Reliable External Storage System for Individuals】This 2 bay hdd enclosure support up to 20TB external expanded storage. The front door adopt....
  • 【6Gbps Transfer Rate】This dual bay hdd enclosure adopt SATA III protocol, transfer rate up to 6Gbps (MAX). Equipped with a versatile USB3.0 Type-B....
  • 【For 2,5/3,5-inch Hard Drives】It comes with two removeable trays, allowing for easy installation and replacement of either the large desktop hard....
  • 【20TB Storage Capacity 】The dual bay hard drive enclosure can house up to 2 hard drives, single disk support up to 10TB. It supported to let you....
  • 【What you will get】 1x 2 bay USB3.0 hard drive enclosure.
Check Stock

Geekworm NASPi Gemini Dual 2.5'' SATA HDD/SSD NAS Storage Kit with Safe Shutdown & Auto Power On & RAID Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)

  • 【NASPi Gemini Overview】Geekworm NASPi Gemini offering an easy and fast way to create your home media center and building NAS or Web server for your Raspberry Pi 4 with dual 2.5 inch SATA HDD/SSDs..
  • 【What's Included】NASPi Gemini is composed of three parts: X882 dual 2.5" sata hdd storage shield, NASPi Gemini metal case, heat dissipation system(include a 4010 PWM fan with metal fan bracket), and they will be packed into NASPi Gemini metal case to get a complete NASPi Gemini.
  • 【How to Power NASPi Gemini】5Vdc +/-5% , ≥4A (Via USB C or DC jack of X882).
  • Recommend to power via DC jack if meet any I/O error. DO NOT power via the USB C of Raspberry Pi 4!!!.
  • 【HDD/SSD Thickness Supported】NASPi Gemini supports HDD/SSD with a thickness not exceeding 16mm, 2.5" HDD/SSD on the market are 7mm, 9.5mm, 12mm and 15mm thickness.(Recommend to use HDD.).
  • 【Function】Raspberry Pi 4 Dual SATA SSD Case Kit With safe shutdown, auto power on and RAID function. With 4010 PWM cooling fan, UASP supported Only..
  • 【Wifi Description】Because the shielding of the metal cases will cause the loss of 2.4G wifi signal, only recommend to use Ethernet or 5G WiFi..
  • 【Button Switch Operation】Press to turn on.
  • Press and hold for 1~2 seconds to reboot.
Check Stock

ICY DOCK Dual 2.5\ HDD/SSD & One 3.5\ HDD/Device Front Bay to External 5.25\ Bay SSD Mounting Bracket | Flex-FIT Trio MB343SP

  • Fits 1 x 3.5” device / hard drive & 2 x 2.5” HDD/SSD.
  • Compatible with any standard external 5.25” bay.
  • Screw-less installation design for 2.5” HDD/SSD slots.
  • Smart-Tip locking mechanism for screwless 3.5” device installation.
  • Side screw holes for 3.5” hard drive installation . Material Plastic.
Check Stock

UniLink TM 2nd SATA 2.5 HDD Hard Drive Caddy Bay for Apple MacBook Pro Unibody SuperDrive

  • HDD Interface: SATA. HDD/SSD Size: 2.5" or less than 9.5mm thinkness. Unibody Macbook machine interface: SATA..
  • Special designed for Macbook/Macbook Pro unibody models. Enhance the storager capacity of your MacBook, Macbook Pro unibody..
  • Plug & Play, Only fits unibody models, non_uniboday model are NOT suitable..
  • Fit for SATA 2.5" hard drive, SSD (less than 9.5mm on thickness).
  • Dual boot, Support installation of 2nd operating system on the 2nd HDD and boot selection..
Check Stock