Top Hatchetman Pin Reviews

D'Addario Accessories IEC to NEMA Plug Power Cable, 10FT (North America)

【8 Pin to 6 Pin adapter】Connected 8 Pin power supply to 8 Pin & 6 Pin graphics card, The 6+2-pin male connectors offer maximum versatility..
【8 Pin to 2 X 8 (6+2) Pin】One end is PCIe 8 Pin female port, the other end is PCIe 2 X 8(6+2) Pin male port..
【PCI Express power cable】8 Pin female port connecting to PSU, the other 2 X 8(6+2) Pin male port connecting to GPUs..
【Widely compatible】Compatible with 6 Pin & 8 Pin graphics cards from popular manufacturers ASUS, ASRock, Radeon, Sapphire, EVGA and Gigabyte..
【Solution】Provide additional power demand, Provide convenient solution for supplying video graphics card power with an 8 pin & 6 pin connector for GPU cards that require more power..

Check Stock

Genuine Dell Optiplex 980 Small Form Factor (SFF) System Motherboard Mainboard Systemboard, Compatible Part Number: C522T

...- 1 GB, 2 GB, or 4 GB, Minimum memory - 1 GB, Maximum memory - 16 GB, Audio: integrated.
Video: Integrated Intel graphics media accelerator HD, Peripheral Interfaces: Back panel -two connectors for line-in/ microphone and line-out, Front panel - two front-panel connectors for headphones and microphone, eSATA - one 7-pin connector, Network -one RJ45 connector, Parallel -one 25-pin connector (bidirectional), Serial -one 9-pin connector.
16550C-compatible, USB - Front panel - two connectors, USB - Back panel -six connectors, Video - one 15-hole VGA connector one 20-pin DisplayPort connector.
System Board Connections: one 120-pin connector PCI Express x16 data width (maximum), one 164-pin connector Express Lane, Serial ATA - three 7-pin connectors, Memory - four 240-pin connectors, Internal USB - one 10-pin connector (supports two USB ports), Processor fan - one 5-pin connector, Front I/O - one 26-pin connector, Front panel control - one 14-pin connector, Processor - one 1156-pin connector, Power 12V - one 4-pin connector, Power - one 24-pin connector, Internal serial card - one 14-pin connector, Internal speaker - one 5-pin connector, PCI Express x1 (wireless card) - one 36-pin connector, Thermal sensor - one 2-pin connector, Intruder connector - one 3-pi....

Check Stock

TAYCCEU CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard, 9.5 inch/24cm

【CPU Power Cable】EPS 12V CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable for Motherboard..
【Easy to Install】EPS 12V CPU 8 Pin Female end to plug into 8 pin male to 8 pin male cable of power supply, CPU 8 pin and ATX 4 pin male ends to plug into the motherboard..
【Compatibility】Compatible with all PSUs - ATX, SFX, Fanless PSU. Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket. It is availble to use the single CPU 8pin, single ATX 4 pin or both of CPU 8 pin + ATX 4 pin..
【Specification】Length: 9.5 inch/24cm, Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs..
【Note】This cable is a common power supply Y-splitter extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output. It needs to be connected to CPU 8 pin Male to Male Power Cable of PSU. Please use it correctly..

Check Stock

Amangny GPU VGA PCI-e 8 Pin Female to Dual 8(6+2) Pin Male PCI Express Adapter Braided Sleeved Splitter Power Cable 9 inch (6 Pack)

8 PIN to 2 X 8 (6+2) PIN: One end is PCIe 8 Pin female port, the other end is PCIe 2 X 8(6+2) Pin male port..
PCI EXPRESS POWER CABLE: 8 Pin female port connecting to PSU, the other 2 X 8(6+2) Pin male port connecting to GPUs..
8 PIN to 6 PIN ADAPTER: Connected 8 Pin power supply to 8 Pin & 6 Pin graphics card..
PROVIDE EXTRA POWER REQUIREMENT: Provide convenient solution for supplying video graphics card power with an 8 pin & 6 pin connector for GPU cards that require more power..
WIDELY COMPATIBLE: Compatible with 6 Pin & 8 Pin graphics cards from popular manufacturers ASUS, ASRock, Radeon, Sapphire, EVGA and Gigabyte..

Check Stock

OBDII 6Pin 9Pin J1708 J1939 Cable for Truck

OBDII female to 6pin+9Pin truck diagnositc connect cable.This cable is compatible with many of Heavy Duty turck diagnostic tools..
OBD 6+9Pin Heavy Duty Truck diagnostic cable is in 6Pin+9pin Male(J1978+J1739) to OBDII 16Pin Female. This OBD 6pin+9pin truck cable is ok for most....
This OBD 6pin+9pin Heavy Duty Truck diagnostic cable is used for connecting your OBDII scanner to heavy duty truck with J1708 6Pin and J1939 9Pin....
Tips:Please make sure your device or scanner must have 16 pin MALE plug and MUST be able to read J1708 or CAN/J1939 and detailed (PINOUT) in picture....
Quality:Cables tested 100%. If anything, please contact with us priority and then have a further discussion. Thanks..

Check Stock

BEADNOVA Pin Keeper with Allen Wrench Pin Back for Backpack Enamel Pins Label Pins Locking (50pcs, Allen Wrench Included)

PIN KEEPER SIZE: Our pin keepers are 5.5 mm/ 0.2 inch in diameter, 9 mm/ 0.35 inch in height. Come with the pack 2pcs Allen wrench approximately 4.5 cm/ 1.8 inch in length. All our pin locks are well made with smooth surface. Work well with most of the pins to secure it from falling off or losing..
STRONG PIN LOCK: The pin lock is made of nickel-plated brass material which is strong and high resistant to rust and fade. You can use the pin locking clasp in a period of time..
PACK INCLUDES: 50pcs pin keepers and 5pcs Allen wrench. You get all you need to keep you pins in place..
WIDE USEAGE: Our pin keeper is suitable for locking pin backs, Disney locking pin, as pin back for insignia, name tag, lanyards, bags, hats, badge. Use pin keeper to secure pins on leather, vest, jacket, cap, work uniform and cards..
EASY TO USE: Put a pin keeper in the back of the pin. Use the provided Allen wrench to secure the pin and pin back tight. Just two easy steps to attach the pin lock, and you never have to worry losing your loving pins..

Check Stock

2 Pack 4-Pin Molex (Actual 2-Pin) to 2 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to Molex Computer Cooler Cooling Fan Splitter Y Power Cable

Please note this 4-Pin Molex is actual 2-Pin but it still works fine on your computer.
4 Pin Molex (Actual 2-Pin) to 2 x 3 pin / 4 Pin 12V PC case fan splitter Y power adapter cable.
Power two 3pin or 4pin (PWM Connector) PC case fan with a 4pin molex connector.
High density black sleeving cable, 10 inch length, cable is backwards compatible with standard 3-pin fans, Fans will be operated at the fixed Molex voltage of 12V.
2 Pack 4-Pin Molex to 2 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to Molex Computer Cooler Cooling Fan Splitter Y Power (Molex-3Pin/4Pin Cable (Splitter)).

Check Stock

OwlTree 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard 10.6 inch

Compatible: work with motherboard with ATX 4 pin, 8 pin or 8+4 pin ports.
Connector A: EPS 12V 8 Pin CPU Female Connector. Connector B: ATX 12V 8 Pin (4+4 Detachable) Male Connector. Connector C: ATX 12V 4 Pin Male Connector.
Length: 10.6inch/27cm, UL1007 18AWG, 34*0.178TS Tinned Copper Wire, Higher Quality than Regular Cable.
Solution: The CPU 8 Pin Female to CPU 8 Pin (4+4) +4 Pin Male Cables provide a good solution for the motherboard required 8+4 pin ATX ports,Compatibility: Compatible with all PSUs - ATX, SFX, Fanless PSU.Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket..
This cable only works with motherboard, not PCI-Express video cards. Serious damage can be caused if your use it in place of PCI-Express video cards..
Package: 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male CPU Power Adapter (10.6in).

Check Stock

Lapel Pin Backings,Butterfly Clutch Pin Backings PVC Rubber Pin Backs Pin Keepers for Replacement Uniform Badge (Black, Pack of 50)

Nice packing-Rubber backs are packed in a transparent plastic box,Each box contains 50pcs rubber pin backers. Pin Locks suits for lapel pins, badges, hat, tie tacks, name tag, toy pins, citation bars,etc..
Super practical-These PVC rubber pin backs are totally awesome! because they keep the pin from moving around.The soft rubber pin back effectively isolate sharp metal pins and ensure they remain in place，Great replacement for pin clutch backs..
If you wear lapel pins on the reg. Throw away the metal backs that don't grip and replace them all with these rubber backs that won't fall off, leaving your pin lost on the ground somewhere. They have great grip, and don't loosen with time..
the PVC pin back is tight and they are not easy to fall off.
Each pin back has a hole which is compatible with the tie tack pin，The rubber pin backs are only compatible with the pin 1-1.2 mm in thickness, it can't fasten if the pin is too slim..
Put the pin in the rubber pin backing, your items will keep pinned securely. With smooth opening and closing, yet the pin back clasp is well secured because of the pin backs locking feature.If there is any problem or these Pin backings does not fit your, just contact we will return full refund to you..

Check Stock

2 Pack 4-Pin Molex to 3 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin / 4-Pin (PWM Connector) to Molex Computer Cooler Cooling Fan Splitter Y Power, Molex-3Pin/4Pin Cable Splitter

Please note this 4-Pin Molex is actual 2-Pin but it still works fine on your computer.
4 Pin Molex to 3 x 3 pin / 4 Pin 12V PC case fan splitter Y power adapter cable.
Power three 3pin or 4pin (PWM Connector) PC case fan with a 4pin molex connector.
Fans will be operated at the fixed Molex voltage of 12V. High density black sleeving cable, 10.6 inch length, cable is backwards compatible with standard 3-pin fans.
2 Pack 4-Pin Molex to 3 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin / 4-Pin (PWM Connector) to Molex Computer Cooler Cooling Fan Splitter Y Power, Molex-3Pin/4Pin Cable Splitter.

Check Stock

Rubber Pin Backs, 100PCS Lapel Pin Backs, Pin Safety Backs for Brooch Tie Hat Badge Insignia, Black

PIN RUBBER BACKS: pin backings made of PVC rubber, durable for long time use.
PIN SECURE BACKS: pin backs lock pins firmly and secure pins in place, no worry about losing your meaningful pins.
PIN BACKS SIZE: locking pin backs are 11mm in diameter and 7mm in height, great pin clutch backs replacement, compatible with pins 1-1.2mm in thickness, it cannot fasten if the pin is too slim.
WIDE APPLICATION: idea use as lapel pin backs, brooch pin backs, tie pin backs hat pin backs, fits on tie tacks, badge insignia, name tag, toy pins, citation bars, jewelries and other homemade craft pins.
PACKAGE INCLUDES: 100PCS black pin backs and 1-year warranty. If you have any questions, please do not hesitate to contact us.

Check Stock

SinLoon SCA 80 Pin to 68 50 Pin SCSI Adapter SCSI 68 Female Adapter SCSI 80 Male Adapter for Data Transfer (50/68/80)

Product Name: SCSI three card 68-80-50 ide SCSI hard disk adapter 68 Pin Female to 80 Pin Male to 50 pin IDE (SCSI 80 pin, 68 pin, 50 pin adapter).
SCSI 68 Female Adapter card is used to convert these interfaces. For example, some adapter cards can convert male to female, and some can convert 50 pin interface to 68 pin interface. In this way, 50 pin low-speed SCSI devices can be connected to 68 pin SCSI interface..
SCSI Three Turn Card. Jumper setting for 16 SCSI IDs. Spindle synchronous, delay start & remote start..
The main function of the adapter card is to convert different SCSI interfaces, for data transfer between 2 SCSI drives..
Note: It's a 50 pin IDE,Only available on industrial server IDE 50-pin motherboards. not a 40 pin or 44 pin ide of an ordinary computer. It can't be used on an ordinary computer. Please pay attention!.

Check Stock

SUBANG 40 Pieces Metal Pin Backs Locking Pin Keepers Locking Clasp with Storage Case

Package Contents: 40 pieces pin back locks with small clear storage case packed to avoid locking pin backs losing.
each pin sizes is approx. 1 cm in diameter and 0.7 cm in height..
Quality Material: pin backings are made of quality nickel-plated copper, small and sturdy.
The metal material makes it durable and colorfast, giving you an incredibly sturdy and safe experience.
The small size makes it unobtrusive while maintaining stability..
Delicate Design: the pin back match for most metal pin.
Metal pin backs provides good grip of pin to keep it stay in place.
Its firm and protective grip assures that you will never lose another pin..
Easy Use: these pin keepers are easy to put on and take off without a tool.
Simply push to secure onto pin post while holding onto your pin to release.
These locking pin backs are very smooth..
Wide Applications: the metal pin back can be applied when tie tacks and lapel pins lose their back, or for homemade craft pins, suitable for brooches, name tags, display books, hanging ropes, bags, vests, hats, badges, collections, etc.

Check Stock