Top Hardener Booster Reviews

TotalBoat 5 1 Epoxy Resin Kit Quart Fast Hardener Marine Grade Epoxy for Fiberglass and Wood Boat Building and Repair

  • PREMIUM EPOXY KITS include enough 5:1 marine epoxy resin and hardener to complete a variety of boat building, composite construction, and epoxy repair....
  • IDEAL VISCOSITY for wetting out fiberglass cloth and other reinforcement fabrics. Self-leveling properties are ideal for coating and laminating.....
  • CHOOSE FAST OR SLOW HARDENER: Pot life ranges from 12 minutes @ 75°F for Fast Hardener, to 20 minutes @ 75°F for Slow Hardener. Minimum recommended....
  • CHOOSE FROM THREE EPOXY KIT SIZES: Quart, Gallon, and 4.5 Gallon, with your choice of TotalBoat 5:1 Fast or Slow Hardener. Kits include resin,....
  • PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 5 parts resin to 1 part hardener ratio for a proper cure every time. Easy-to-use....
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • BUNDLE INCLUDES: West System 105A Epoxy Resin (32 fl oz), 205A Fast Epoxy Hardener (7 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • BUNDLE INCLUDES: West System 105B Epoxy Resin (126.6 fl oz), 205B Fast Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
Check Stock

TotalBoat 5 1 Epoxy Resin Kit Gallon Slow Hardener Marine Grade Epoxy for Fiberglass and Wood Boat Building and Repair

  • Premium Epoxy Kits Include Enough 5:1 Marine Epoxy Resin And Hardener To Complete A Variety Of Boat Building, Composite Construction, And Epoxy Repair....
  • Ideal Viscosity For Wetting Out Fiberglass Cloth And Other Reinforcement Fabrics. Self-Leveling Properties Are Ideal For Coating And Laminating.....
  • Choose Fast Or Slow Hardener: Pot Life Ranges From 12 Minutes @ 75°F For Fast Hardener, To 20 Minutes @ 75°F For Slow Hardener.
  • Choose From Three Epoxy Kit Sizes: Quart, Gallon, And 4.5 Gallon, With Your Choice Of Totalboat 5:1 Fast Or Slow Hardener. Kits Include Resin,....
Check Stock

TotalBoat-510822 High Performance Epoxy Kit Crystal Clear Marine Grade Resin and Hardener for Woodworking Fiberglass and Wood Boat Building and Repair Quart Medium

  • EPOXY KITS include low-viscosity resin and clear, non-blushing hardener for woodworking, boat building, laminating and repair projects. Ideal for....
  • NON-BLUSHING EPOXY system means no time-consuming washdowns to remove surface blush between coats, so projects get finished faster. Low odor and low....
  • CHOOSE SLOW, MEDIUM, OR FAST HARDENER to control working properties and cure times. Slow Hardener has the longest working and cure times. Medium....
  • CHOOSE EPOXY KIT SIZE: Pint, Quart, Gallon or 2 Gallon. All TotalBoat Epoxy Kits come with calibrated pumps, mixing sticks and mixing cups. Compatible....
  • PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 2 parts resin to 1 part hardener ratio for a proper cure every time.
Check Stock

TotalBoat Thickset Deep Pour Epoxy Resin Kit (8 Gallon) - Crystal Clear Thick Pour Resin for Art, Casting, Epoxy River Tables, Live Edge Slabs, Molds, Wood

  • DEEP POUR EPOXY RESIN AND HARDENER KITS for river tables, live-edge slabs, casting, deep resin molds, art, embedding, encapsulating and filling deep voids in wood.
  • waterproof resin cures without shrinkage, cracking or yellowing.
  • CRYSTAL CLEAR EPOXY RESIN self-levels to creates a high-gloss, glass-like finish on prepared wood, concrete, stone, ceramic and metal surfaces.
  • great for deep casting and molding projects to create unique sculptures, figurines, jewelry and more.
  • POUR EPOXY UP TO 1″ THICK PER SINGLE LAYER: Pour single layers of resin up to 1/2″ thick for larger casting applications such as slab and river table pours, and up to 1″ thick for smaller molds.
  • for even deeper pours per layer, try Total Boat ThickSet Fathom (sold separately).
  • EASY TO USE, EASY TO TINT: Simple mix ratio of 3 parts epoxy resin to 1 part hardener, and long working time make it easy to use.
  • to add interest, tint mixed liquid epoxy with mica powder, universal tints, alcohol ink pigments and other epoxy-safe colorants.
  • LOW VOC, LOW ODOR RESIN IS AVAILABLE IN FOUR SIZES: 1.3 Quart Kit (1 qt resin, 1/3 qt hardener), 1.3 Gallon Kit (1 gal resin, 1/3 gal hardener), 4 Gallon Kit (3 gal resin, 1 gal hardener) and 8 Gallon Kit (6 gal resin, 2 gal hardener).
Check Stock

TotalBoat DIY Epoxy Italian White Marble Effect Countertop Project Kit | Includes Resin, Pigments & Tools | Make Faux Marble Kitchen Countertops, Bathroom Counters & Coffee Tables (Gallon Kit)

  • DIY EPOXY WHITE ITALIAN MARBLE EFFECT COUNTERTOP KITS come with just about everything needed to create a beautiful faux Italian marble countertop that looks just like the real thing!.
  • AVAILABLE IN FOUR SIZES FOR LARGE AND SMALL PROJECTS, kits include clear TotalBoat TableTop Epoxy Resin and Hardener, mica powder marbling pigments, liquid white epoxy pigment, prep & mixing tools, and heat gun..
  • SIMPLE STEP-BY-STEP INSTRUCTIONS make this 1-day project fun, fast, and easy! Make your own marbled epoxy countertop, serving tray, kitchen island top, shelves, and more..
  • TOTALBOAT TABLETOP EPOXY HAS AN EASY 1:1 MIX RATIO BY VOLUME, and self-levels as it cures. Included heat gun makes it easy to prevent bubbles & enhance the marbling effect..
  • CHOOSE KIT SIZE: 2 Quart Kit (1 QT TableTop Epoxy Resin and 1 QT TableTop Hardener).
  • Gallon Kit (½ GAL TableTop Epoxy Resin and ½ GAL TableTop Hardener.
  • 2 Gallon Kit (1 GAL TableTop Epoxy Resin and 1 Gal TableTop Hardener.
  • 4 Gallon Kit (2 GAL TableTop Epoxy Resin and 2 GAL TableTop Hardener).
Check Stock

TotalBoat DIY Epoxy Italian White Marble Effect Countertop Project Kit | Includes Resin, Pigments & Tools | Make Faux Marble Kitchen Countertops, Bathroom Counters & Coffee Tables (2 Gallon Kit)

  • DIY EPOXY WHITE ITALIAN MARBLE EFFECT COUNTERTOP KITS come with just about everything needed to create a beautiful faux Italian marble countertop that looks just like the real thing!.
  • AVAILABLE IN FOUR SIZES FOR LARGE AND SMALL PROJECTS, kits include clear TotalBoat TableTop Epoxy Resin and Hardener, mica powder marbling pigments, liquid white epoxy pigment, prep & mixing tools, and heat gun..
  • SIMPLE STEP-BY-STEP INSTRUCTIONS make this 1-day project fun, fast, and easy! Make your own marbled epoxy countertop, serving tray, kitchen island top, shelves, and more..
  • TOTALBOAT TABLETOP EPOXY HAS AN EASY 1:1 MIX RATIO BY VOLUME, and self-levels as it cures. Included heat gun makes it easy to prevent bubbles & enhance the marbling effect..
  • CHOOSE KIT SIZE: 2 Quart Kit (1 QT TableTop Epoxy Resin and 1 QT TableTop Hardener).
  • Gallon Kit (½ GAL TableTop Epoxy Resin and ½ GAL TableTop Hardener.
  • 2 Gallon Kit (1 GAL TableTop Epoxy Resin and 1 Gal TableTop Hardener.
  • 4 Gallon Kit (2 GAL TableTop Epoxy Resin and 2 GAL TableTop Hardener).
Check Stock

TotalBoat DIY Epoxy Italian White Marble Effect Countertop Project Kit | Includes Resin, Pigments & Tools | Make Faux Marble Kitchen Countertops, Bathroom Counters & Coffee Tables (2-Quart Kit)

  • DIY EPOXY WHITE ITALIAN MARBLE EFFECT COUNTERTOP KITS come with just about everything needed to create a beautiful faux Italian marble countertop that looks just like the real thing!.
  • AVAILABLE IN FOUR SIZES FOR LARGE AND SMALL PROJECTS, kits include clear TotalBoat TableTop Epoxy Resin and Hardener, mica powder marbling pigments, liquid white epoxy pigment, prep & mixing tools, and heat gun..
  • SIMPLE STEP-BY-STEP INSTRUCTIONS make this 1-day project fun, fast, and easy! Make your own marbled epoxy countertop, serving tray, kitchen island top, shelves, and more..
  • TOTALBOAT TABLETOP EPOXY HAS AN EASY 1:1 MIX RATIO BY VOLUME, and self-levels as it cures. Included heat gun makes it easy to prevent bubbles & enhance the marbling effect..
  • CHOOSE KIT SIZE: 2 Quart Kit (1 QT TableTop Epoxy Resin and 1 QT TableTop Hardener).
  • Gallon Kit (½ GAL TableTop Epoxy Resin and ½ GAL TableTop Hardener.
  • 2 Gallon Kit (1 GAL TableTop Epoxy Resin and 1 Gal TableTop Hardener.
  • 4 Gallon Kit (2 GAL TableTop Epoxy Resin and 2 GAL TableTop Hardener).
Check Stock

Co-parts Black Carbon Fiber Cloth Fabric 200g 19.5\wide 3K Weave 78.5\ long

  • ✅ STRONG AND VERSATILE - This Carbon Fiber Kit is UV stable and chip resistant. Use it for hoods, custom gauges, marine application, and more! Great for home projects. Economical and simple to use..
  • ✅ CONTENTS - This kit includes an 8 oz bottle of Epoxy, a 4 oz bottle of Hardener, and a 36" x 14" Carbon Fiber Cloth. It is securely packaged in a strong cardboard roll..
  • ✅ MIXING - Mixed at 2 parts A (Epoxy) to 1 part B (Hardener). Thoroughly mix both the Epoxy and Hardener in a clean, new, container for 2 mins. Be sure to scoop the sides and bottom while mixing!.
  • ✅ APPLICATION - Apply all of the Epoxy and Hardener mix onto the carbon fiber cloth. Use a paint brush or roller. Once dry, the carbon fiber will not be flexible and it will have a shine to it..
  • ✅ 110% SATISFACTION GUARANTEE - Get a full refund if not fully satisfied. Contact us ANYTIME after purchase and we will make it right..
Check Stock

MAS Epoxies Deep Pour Epoxy Resin Kit - Crystal Clear, Slow Curing Epoxy Resin for Casting, River Tables, Encapsulating, Live Edge Slabs, Molds, Filling Voids, Cracks (4 Gallon)

  • DEEP POUR EPOXY RESIN AND HARDENER KITS for river tables, live-edge slabs, casting, deep resin molds, art, embedding, encapsulating and filling large voids and cracks in wood.
  • cures to a 100% solid and is sandable and machinable once fully cured..
  • CRYSTAL CLEAR EPOXY RESIN self-levels to creates a high-gloss, glass-like finish on prepared wood, concrete, stone, ceramic and metal surfaces.
  • great for deep casting and molding projects to create unique sculptures, figurines, jewelry and more.
  • MAX CASTING THICKNESS UP TO 1" THICK PER POUR: Pour single layers of resin up to 1/2” thick for larger casting applications such as slab and river table pours, and up to 1" thick for smaller molds.
  • for pours over 1” thick per layer, try MAS Epoxies Deep Pour X (sold separately).
  • EASY TO USE, EASY TO TINT: Simple mix ratio of 3 parts epoxy resin to 1 part hardener, and extended working time make it easy to use. Pour clear or add color, tint mixed liquid epoxy with mica powder, translucent dyes, alcohol ink pigments and other epoxy-safe colorants.
  • LOW VOC, LOW ODOR RESIN IS AVAILABLE I....
Check Stock

Seamax Commercial Grade 2 Part Marine Adhesive for All PVC and Hypalon Inflatable Boats, Sealed in Aluminum Bottles for Long Term Storage (PVC 250ml 2 Part Glue, Glue Only)

  • Mix 5% hardener (treatment) to the glue before use. Maximum add 10% hardener when in Cold Weather 10C-15C or High Humidity 50-75%. Do NOT exceed a mixture of 10% to the glue. M.E.K. is the thinner for PVC glue. If the glue hardens, you can add up to 10% MEK to the glue to reactivate the glue. Glue mixed with hardener can be kept for up to 6 hours..
  • Use a small painting brush to apply 1-3 layer(s) glue on both material surfaces. Wait 5 minutes between applications to allow glue to dry and then attach the two pieces of material together. Once you have applied the patch, work from the center out with something like a teaspoon to force out any air bubbles and then apply pressure to the repaired area for at least 24 hours. Wait 48 hours for the glue to cure before using..
  • PVC Glue can be used as one part. For a better result, please do 2 Part glue (glue and hardener) to ensure the overall quality of the repair and extend the life time of the bonding. For any repairs related to air leaks, please use 2 Part Glue. Glue and hardener sealed in the bottles can be kept up to 3 years.
  • Instruction of Glue Layer applied: 1-2 layers on new....
Check Stock

Seamax Commercial Grade 2 Part Marine Adhesive for All PVC and Hypalon Inflatable Boats, Sealed in Aluminum Bottles for Long Term Storage (Hypalon 250ml 2 Part Glue, Glue Only)

  • Mix 5% hardener (treatment) to the glue before use. Maximum add 10% hardener when in Cold Weather 10C-15C or High Humidity 50-75%. Do NOT exceed a mixture of 10% to the glue. M.E.K. is the thinner for PVC glue. If the glue hardens, you can add up to 10% MEK to the glue to reactivate the glue. Glue mixed with hardener can be kept for up to 6 hours..
  • Use a small painting brush to apply 1-3 layer(s) glue on both material surfaces. Wait 5 minutes between applications to allow glue to dry and then attach the two pieces of material together. Once you have applied the patch, work from the center out with something like a teaspoon to force out any air bubbles and then apply pressure to the repaired area for at least 24 hours. Wait 48 hours for the glue to cure before using..
  • PVC Glue can be used as one part. For a better result, please do 2 Part glue (glue and hardener) to ensure the overall quality of the repair and extend the life time of the bonding. For any repairs related to air leaks, please use 2 Part Glue. Glue and hardener sealed in the bottles can be kept up to 3 years.
  • Instruction of Glue Layer applied: 1-2 layers on new....
Check Stock