Top Hardened Pushrods Sbc Reviews

Push Rods Pushrods & Non Roller Flat Lifters Kit set compatible with Chevy GM SBC V8 283 305 327 350 7.794\ Over all Length

  • Includes Everything To Convert Stock Pushrods To Adjustable.
  • Kits Includes Pushrods, Covers, Retainer Clips, Gaskets And O-rings.
  • Pushrods Are Manufactured From Rigid Chrome Moly Steel Tubing.
Check Stock

COMP Cams 4840-1 Flat 1 Piece Guide Plate for GM LS3 w/ 5/16\ Pushrod and 8mm Stud

  • A Performance Necessity - Guide plates are necessary for high lift/spring pressure environments of performance engines.
  • Precision - COMP Cams guideplates feature exact stud placement and rounded contact points.
  • Perfect Fit, High Durability - Designed using rapid prototype techniques for accurate fit.
  • Fits GM LS3/L92 engines with 8mm studs and 5/16" pushrods.
Check Stock

COMP Cams 4839-1 Flat 2 Piece Adjustable Guide Plate for SBC/289-351W w/ 3/8\ Pushrod 7/16\ Stud

  • A Performance Necessity - Guide plates are necessary for high lift/spring pressure environments of performance engines.
  • Precision - COMP Cams guideplates feature exact stud placement and rounded contact points.
  • Perfect Fit, High Durability - Designed using rapid prototype techniques for accurate fit.
  • Fits Chevrolet 265-400 Small Block and Ford 289-351W engines with 7/16" studs and 3/8" pushrods.
Check Stock

Comp Cams\4825-8 Flat 1 Piece Guide Plate Set for Dodge Magnum V8 w/ 5/16\\\ Pushrod and 5/16\\\ Stud\

  • A Performance Necessity - Guide plates are necessary for high lift/spring pressure environments of performance engines.
  • Precision - COMP Cams guideplates feature exact stud placement and rounded contact points.
  • Perfect Fit, High Durability - Designed using rapid prototype techniques for accurate fit.
  • Fits Dodge Magnum V8 engines with 5/16" studs and 5/16" pushrods.
Check Stock

YESHMA Cylinder Head Stud Kit Compatible with Chevy Small Block SBC 265 267 283 302 305 307 327 350 383 400 Head Studs

  • 【Compatibility】:Compatible With the SBC Engine.Compatible With Chevy Small Block SBC 265 267 283 302 305 307 327 350 383 400 Head Studs..
  • 【Quality Standard】:Each cylinder head screw set is strictly manufactured to ensure zero defects-hardened and parallel ground washers are included with zero failures to ensure uniform load distribution and accurate torque readings..
  • 【Forging Process】:The Cylinder Head Stud Kit are cold forged to ensure molecular integrity and heat treated before thread rolling and machining..
  • 【Installation Suggestions】:Product installation involves the engine, the internal structure of the engine is complex, Professional Installation is Highly Recommended..
  • 【Packing Include】:One set of Cylinder Head Stud Kit.As Shown in the Pictures.If you have any questions, please feel free to contact us, we will reply you within 24 hours.​​.
Check Stock

Brian Tooley Racing BTR Stage 3 Turbo Camshaft for Chevrolet GM Gen III LS1 LS2 LQ4 LQ9 Engines (Cam, Springs, Pushrods, & Install Kit)

  • BTR CAMSHAFT - LS - TURBOCHARGED STAGE 3 - 33035144R1.
  • Camshaft Specs: 230/235 .616"/.614" 114+4.
  • Add a BTR Dual Springs Kit with Steel Retainers, Hardened Pushrods, or an install kit that includes a GM crank bolts and front cover gasket set..
Check Stock

JEGS Pushrod Guide Plates | Fits Big Block Chevy | Made In USA | For 3/8 “ Diameter Push Rods | Steel | Black Oxide Finish | Raised | Heat Treated | 8 Plates Per Package For One Engine

  • DESIGNED AND MANUFACTURED FOR precise fit and function.
  • MADE IN USA with high quality components and assembly.
  • NOTE: cylinder head machining and screw-in rocker arm studs may be required for installation.
Check Stock

Elgin Industries HP Hardened Pushrod Set 7.900\ +100 Longer compatible with sb Chevy 400 383 350 327 305 283

  • 5/16" diameter small block hardened push rods.
  • For '55-'94 262, 283, 302, 305, 307, 327, 350, and 400 non roller cam engines..
Check Stock

RJSPHH Pushrod Set 7.400\ Longx .080\

  • 7.400" One Piece Pushrods, 5/16" diameter, and .080" wall (set of 16).
  • made of 4130 Structural Steel material for premium quality and high performance.
  • Replacement pushrods for 1997-2012 GM LS-series GEN III and IV small block V-8 engines. Fits 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92.
  • Compatible with 99-02 Camaro & Firebird, 10-13 Camaro, 99-13 Corvette, 04-06 Pontiac GTO, 04-07 Cadillac CTS-V, 08-09 Pontiac G8, 00-13 Tahoe/Yukon/Escalade, 03-09 H2 , 01-13 Chevrol Avlanche, 99-13 Silverado & Sierra 4.8L/5.3L/6.0L.
  • High Quality, Long Lasting Finish - Pushrods are all finished with a black oxide coating, ensuring the the chromemoly steel will not rust or wear prematurely..
Check Stock

CHEVY GM LS Turbo Exhaust Hotparts T4 Kit Vortec V8 4.8 5.3 6.0 LSX Manifolds

  • Brian Tooley Camshaft, BTR Platinum dual springs with Steel Retainers, and 7.400 Chromoly Pushrods..
  • Cam specs are Specs: 226/231 .610"/.608" 113+4 and comes a 3 bolt timing gear pattern..
  • When you need a little more RPM than the stage 1 can give you. If you have a light car wanting to push the limits, then this is the go to cam for your 5.3/6.0 S400 equipped combination..
  • Springs: BTR Platinum Dual Spring Kit for LS engines using stock rocker arms. Includes dual polished springs, matching Steel Retainers (faster reving than steel), Locators for stock guides, locks and seals..
  • Pushrods: 7.400" Long 5/16 Chromoly .080 Wall Pushrods by Brian Tooley Racing. Highly recommended when upgrading Camshafts..
Check Stock

Michigan Motorsports 7.400 Pushrods Fits 4.8 5.3 5.7 6.0 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92

  • Fits 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92.
  • Set of sixteen (16) stock replacement pushrods for 1997-2012 GM LS-series GEN III and IV small block V-8 engines..
  • These are the stock length 7.400" Long 5/16" pushrods.
  • Pushrod specifications are as follows: OVERALL LENGTH: 7.400" TUBE SIZE: 5/16" x .075" (stock) MATERIAL: 1010 ENDS: 5/16" ball (drilled).
Check Stock

Hamilton Cams 24Valve Extreme Duty Pushrods for Dodge Cummins 5.9L/6.7L 98.5-17

  • Extreme Duty steel pushrods designed for over 750 HP.
  • Extreme duty pushrods consist of a 3/8? .095? wall intake pushrod and a 7/16? .120? exhaust pushrod.
  • Fit 24V Cummins 5.9L/6.7L through years 1998.5-2017.
Check Stock

Brian Tooley Racing BTR Turbo LS Stage 3 Cam, Spring Kit with Titanium Retainers and Chromoly Pushrods LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2

  • Brian Tooley Turbo LS Stage 3 Camshaft, BTR Platinum dual springs with Lightweight Titanium Retainers, and 7.400 Chromoly Pushrods..
  • Cam specs are:230/235 .616"/.614" 114+4 and comes a 3 bolt timing gear pattern..
  • When you need a little more RPM than the stage 2 can give you. If you have a light car wanting to push the limits, then this is the go to cam for your 5.3/6.0 S400 equipped combination..
  • Springs: BTR Platinum Dual Spring Kit for LS engines using stock rocker arms. Includes dual polished springs, matching lightweight Titanium Retainers (faster reving than steel), Locators for stock guides, locks and seals..
  • Pushrods: 7.400" Long 5/16 Chromoly .080 Wall Pushrods by Brian Tooley Racing. Highly recommended when upgrading Camshafts..
Check Stock