Top Hardened Pipe Reviews

Reed Tool DEB4 Deburring Tool for Plastic 1-1/4 to 4-Inch

One easy revolution of the DEB4 Deburring Tool produces a 3/32-Inch 15-Degree chamfer in seconds.
Creates a smooth pipe end so solvent spreads evenly as pipe is joined.
Reversible, sharpenable, hardened steel blade for two cutting edges.
Deburrs six pipe sizes: 1 1/4-Inch - 4-Inch.

Check Stock

Wheeler Rex 4908 Ratchet Pipe Cutter, 1/2\-6\ Standard, 5\ XH Soil, 6\ No-Hub and 8\ Tile

No vise required - Cutter does not rotate around pipe.
Ratchet action cleanly cuts pipe in tight quarters (490).
Hardened deep penetrating cutter wheels make fast clean cuts.

Check Stock

Yost Vises 34C Combination Vise | 6 Inch Jaw Width Heavy-Duty Utility Pipe and Bench Vise |Secure Grip with Swivel Base and Large Pipe Jaw Capacity | Made with Ductile Iron | Blue

COMBINATION VISE: The Yost Vises 34C 6-inch utility combination pipe and bench vise are made from 65,000 PSI Tensile Ductile Iron body parts. It has hardened, replaceable steel pipe jaws as well as hardened steel flat serrated jaws and continuous rolled thread on the main screw. The pipe jaws are set back to allow for the machinist's vise use..
TECHNICAL SPECS: Jaw Width 6" (15.24 cm), Jaw Opening 10" (25.4 cm), Throat Depth 7.5" (19.05 cm), Min Pipe Capacity 0.25" (0.635 cm), Max Pipe Capacity 6" (15.24 cm)..
SWIVEL BASE: Interlocking swivel base with 360-degree motion and 2 lockdowns..
HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that ....

Check Stock

Armour Line RP77171 Internal Plastic Pipe Cutter, 1-1/4 in Or Larger Diameter (Single Pack)

PLASTIC PIPE CUTTER – Resists rust, corrosion and streaking and comes in a beautiful chrome plated finish..
STEEL CUTTER BLADE – Saw tooth hardened steel cutter blade cuts plastic pipe from 1-1/4 in. in diameter..
ATTACHES TO POWER DRILL – Steel shaft attaches to power drill..
FLUSH CUT – Allows for a flush cut to the ground..
REQUIRES – Use on plastic pipe only. Requires a power drill for use..

Check Stock

General Tools 127 Iron Pipe Cutter

Cuts up to 2-5/8-Inch copper and iron pipe.
Grooved rollers accept flared pipe ends to provide cuts directly below the flare. Solid frame for greater strength.
Cutting wheel is made from bearing tool steel for maximum durability. Includes fold-out deburrer with positive lock and two cutting edges.
Hardened Acme threads for greater cutting strength.

Check Stock

Stanley Proto J140SET Proto 4 Piece Internal Pipe Wrench

Ideal for removing broken threaded pipe ends, plugs and fittings.
Installation and removal without thread damage.
Eccentric cam action engages wrench against the walls of the pipe.
Hex body allows for use of adjustable wrench for added torque.
Made from hardened steel and plated to help prevent rust, Made in USA.

Check Stock

Mophorn 460-6 Tripod Pipe Chain Vise 1/8 -6 Capacity,Pipe Stand Portable Foldable Steel Legs,Pipe Jack Stands w/ Tool Tray Tripod Stand Chain Vise Ideal for a Variety of Pipe Materials

1/8"-6" Pipe Capacity: This tripod stand chain vise features a large pipe capacity from 1/8 to 6 inches. The tool with hardened teeth is designed to....
Compact & Portable: This chain vise stand's flat-folding design enables briefcase-style transportation and compact storage in job boxes. Perfect for....
Two-in-One Tool: Our pipe vise tripod is also equipped with three pipe benders. The tube bending feature provides you with remarkable convenience....
Stable & Skid-proof: The steel legs of the tripod pipe vise are designed with rubber mounts to eliminate sliding. And the heavy-duty tray under the....
Versatile Use: Our pipe stand for welding is suitable for all pipe-related home improvement repairs that need a tight grip. Chain Vise delivers....

Check Stock

Mini Copper Pipe Tubing Cutter - Adjustable Mini Tube Cutter for Copper Metal, Plastic, Brass, Thin Stainless Steel for （1/8 inch -7/8 inch）/ (3-22mm) OD Pipes)

【Size】the mini pipe cutter is small, with a size of about 40 to 60 mm, suitable for construction sites, HVAC and refrigeration, plumbing, manufacturing, heating, decoration and even garage maintenance shops..
【Material】the mini pipe cutter is made of high-quality zinc alloy material, which is strong and durable and has a long service life.
【Advantage】the hardened cutting steel blade made of high quality material can easily cut the pipe and the blade can be disassembled and replaced..
【Easy to use】it is easy to operate and adjustable, and can be rotated and cut on pipes with an outer diameter of 3-22 mm (1-8 inch to 7-inch)..
【Application】it is suitable for cutting copper pipe, aluminum pipe, plastic pipe and other thin pipes or tubes. it is easy to use and improve work efficiency..

Check Stock

Mini Copper Pipe Tubing Cutter - Adjustable Mini Tube Cutter for Copper Metal, Plastic, Brass, Thin Stainless Steel for （1/8 inch -7/8 inch）/ (3-22mm) OD Pipes)

【Size】the mini pipe cutter is small, with a size of about 40 to 60 mm, suitable for construction sites, HVAC and refrigeration, plumbing, manufacturing, heating, decoration and even garage maintenance shops..
【Advantage】the hardened cutting steel blade made of high quality material can easily cut the pipe and the blade can be disassembled and replaced..
【Material】the mini pipe cutter is made of high-quality zinc alloy material, which is strong and durable and has a long service life.
【Easy to use】it is easy to operate and adjustable, and can be rotated and cut on pipes with an outer diameter of 3-22 mm (1-8 inch to 7-inch)..
【Application】it is suitable for cutting copper pipe, aluminum pipe, plastic pipe and other thin pipes or tubes. it is easy to use and improve work efficiency..

Check Stock

Durable Universal Hydraulic Pipe Expander Fuel Line Flaring Tool Set Dilator Scraper Cutter Hole Splint

Expanding & Flaring Functions: This hydraulic flare tool features 2-in-1 tube expanding and flaring functions with eight expanding dies(3/16", 1/4",....
Manual Hydraulic Mechanism: This flaring tool set achieves the pipe expanding and flaring with a hydraulic mechanism. The hydraulic tool is designed....
Pipe Cutting & Deburring: This flaring tool comes with one pipe cutter and one deburring tool, both of which are easy to use with the handwheel....
Durability & Portability: The flaring tool is made of durable hardened steel, which is reliable and built to last, saving your money. Besides, the....
Wide Application: This hydraulic flaring tool kit is suitable for expanding and flaring soft metal tubing and piping, such as copper and aluminum....

Check Stock

DURATECH 14-inch Heavy Duty Aluminum Offset Pipe Wrench, 2\ Jaw Capacity, Adjustable Plumbing Wrench, Drop Forged, Exceed GGG standard

...rop-forged jaw is heat-treated to resist distortion or breakage.Fully forged CR-MO steel floating jaw allows for quick adjustments and provides outstanding strength..
Large Jaw Capacity: Ideal for 3/4” to 2” Pipe. Ergonomic handle form has been designed for maximum comfort and won’t dig into the palms. Through hardened jaws deliver increased grip. Standard handle lengths with wide gripping surface for increased comfort and one hand operation..
Widely Application: Suitable for all pipe related home improvement repairs that need a tight grip, such as gas tank repair or household plumbing. For home improvement workshops, a hole is located at the base of the handle allowing operators to hang on hooks or on a peg board for quick access..

Check Stock

Wilton 4650R Reversible Bench Vise, 6-1/2' Jaw Width, 7-1/4' & 12-3/4' Jaw Opening (28822)

IDEAL POSITIONING: 360° swivel base has double lockdowns..
VERSATILE FORMING: Two large anvil work surfaces for forming and shaping materials..
ADAPTABLE GRIPPING: Built-in pipe jaws handle a range of pipe sizes (1/4" to 3")..
PLENTY OF CAPACITY: Jaw opening expands from 7-1/4" to 12-3/4" when reversed..
LONG LIFE: Replaceable hardened steel jaws with a serrated pattern ensure grip and a long life..

Check Stock

Reed 03507 Set of (4) Hardened Steel HSI6-8 Wheels Fits SDT-H6 4'-6', SDT-H8 6'-8' Cutter & SDT-1224 Pipe Threader

Set of Four Hardened Steel REED HSI6-8 Cutting Wheels.
Fits SDT-H6 4"-6" Heavy Duty Hinged Pipe Cutter, SDT-H8 6"-8" Pipe Cutter.

Check Stock