Top Hardened Mold Reviews

Warner Pry Bar for Molding & Trim Removal Painter s Series 10350A

Polypropylene core with soft rubber over mold handle is molded to the hardened high carbon steel blade.
Comfortable, lightweight, solvent resistant handle to reduce hand fatigue.
Blade isn't painted, so no coating to scuff wall surface.

Check Stock

ATP 13 Piece Harmonic Balancer Steering Wheel Puller Kit

Includes the 1 center screw, 1 Floating swivel, 2 5/16 x 4 bolts, 2 1/4 x 3 bolts, 3 1/4 x 2 bolts, and 3 5/16 x 2 bolts..
All bits are machine precision, hardened, and tempered..
Tool allows for even pressure which prevents damage to parts, Yoke allows for either 2 or 3-hole application..
Center screw features a floating, removable swivel..

Check Stock

ReDo Skateboard 34.5\ x 8\ Longboard San Diego Umbrellas Complete Skateboard for Boys Girls Kids Teens

Complete high quality cruiser skateboard made from 8ply full sheet-rock hard maple.
Custom wheel wells increases maneuverability, Taco Mold provides a stable ride.
Carbon steel ReDo Abec 7 speed bearings, 5” Geo Full Aluminum trucks with hardened axle.
65MM 78A soft urethane wheels for a smooth.

Check Stock

Bestgle 10Pcs 1/8''(3mm) Shank Rotary Burr Rasp Set Carbon Steel Wood Carving File Rasp Drill Bits Fit for Dremel Rotary Tools for DIY Woodworking Wood Plastic Carving Polishing Grinding Engraving

Made of high-carbon steel tempered and hardened for long-life cutting power, makes all you’re grinding needs easier and more convenient.
High product processing quality, high finish, can process out a various of high-precision mold cavity.
Shank diameter: 3mm( 1/8"), Cutting edge diameter: 6mm-8mm, Total Length: 40mm-45mm, Fits for dremel and most small rotary tools.
Suitable for low hardness of the workpiece, such as soft wood,plastic,rubber, etc.| Note: Not suitable for hard wood, such as Walnut, Bodhi root, oak etc.

Check Stock

Hand Held Power Punch Sheet Metal Hole Punch Kit Compound Leverage

Included Dies: 3/32"(2mm), 1/8"(3mm), 5/32"(4mm), 3/16"(4.5mm), 7/32"(5.5mm), 1/4"(6mm), 9/32"(7mm).
Ideal for punching holes on a variety of materials and applications including aluminum, brass, steel sheet metal, leather, polyurethane, plastic, canvas, cardboard, paper, belt, shoes and etc..
Precisely machined chrome vanadium steel punches and dies hardened to 52 hardness creates clean holes through sheet metals up to 16 gauge.
Punches 7 Sizes of Precision Round Holes in Aluminum, Plastic, Brass, Even 16-Ga 1-1/2" Throat Includes Die Adjusting Key & Blow Mold Case.
SHIPPING-IT will be shipped within 24h, delivery in 7-12 days. Contact us if any problems..

Check Stock

5Pcs Premium Tungsten Steel Carbide Rotary Burr Set 1/4inch Shank Double Cut Carbide Burr Set 8MM Head Die Grinder Bits for Die Grinder Drill DIY Wood-Working Carving Metal Polishing Engraving

【5Pcs Solid Carbide Burr Bits】The grinder drill set is made of tungsten carbide, high sharpness and good toughness, machining hardness up to HRC70, great for carving, polishing, drilling.
【Metal Die Grinder Drill Bit】The rotary file is widely used for processing metal(include hardened steel) and non-metal( like wood, bone and marble), perfectly fits for die grinder and drill.
【1/4” Shank Rotary Burr】Size: Shank-1/4inch(6mm), Tip Head-5/16inch(8mm), Total Length 58-65mm, Cutting Burr Shape: Ball, Round Nose, Pointed Tree, Cylinder with End Cut and Cylinder with Round Head.
【Double Cut Head Design】The double burr can cut cleanly and quickly through hardened steel, with smoother surface and no dust pollution compared with grinding wheels or steel cutter.
【Wide Applications】The tungsten grinding bits are widely used in woodworking carving, mold processing, burr cleaning and impeller polishing.
Plus package comes with plastic case for safety storage and protection.

Check Stock

WBHome Hydraulic Wire Crimper Battery Lug Terminal Cable Crimping Tool, 8 Dies, 12 Ton

Made of hardened steel with chrome finish. It also provides greater stability and longer life..
Mold configuration: 8AWG, 6AWG, 4AWG, 2AWG, 1/0 AWG, 2/0 AWG, 3/0 AWG, 4/0-250 MCM (10,16,25,35,50,70,95,120mm2) cable and welding cable, Power cord, cable, etc..
With this powerful crimper, you can easily crimp wires and docking connectors. It is much easier than using a pair of manual crimpers. It provides a more convenient and safe crimping operation..
It is equipped with a safety valve. When the pressure reaches its maximum, the pressure is automatically released to prevent overpressure..
The product is equipped with a durable yellow plastic case for easy carrying and compact storage..

Check Stock

Shure KSM8/N Dualdyne Vocal Microphone

Patented cartridge design features two ultra-thin diaphragms (one active and one passive) and a groundbreaking inverted airflow system.
Exceptional control of proximity effect greatly increases working distance without on-axis coloration.
Neutral mid- and high-frequency reproduction due to controlled proximity effect results in the most natural-sounding dynamic microphone available.
Neodymium magnet resides in a micro-injection mold of aerospace SoftMag material, maximizing the magnetic field for the highest output level.
Re-imagined Shure Pumping Pneumatic Shock Mount features tuned cavities, specific resistances, and precisely machined components fully integrated into the cartridge’s acoustic properties, delivering exceptional rejection of handling noise without any loss of low-frequency response.
Patent-pending Diaphragm Stabilization System technology protects and stabilizes the active diaphragm from unwanted movement from plosives or impact.
Dent-resistant, hardened carbon-steel grille design lined with hydrophobic woven fabric provides exceptional water, plosive and wind protection.

Check Stock

TEMCo Lug Crimper Tool TH0012-8 AWG - 0000 AWG 4/0 DIELESS Indent Electrical Battery Terminal Cable Wire 5 YEAR WARRANTY

Made of hardened steel with chrome finish. It also provides greater stability and longer life..
Mold configuration: 8AWG, 6AWG, 4AWG, 2AWG, 1/0 AWG, 2/0 AWG, 3/0 AWG, 4/0-250 MCM (10,16,25,35,50,70,95,120mm2) cable and welding cable, Power cord,....
With this powerful crimper, you can easily crimp wires and docking connectors. It is much easier than using a pair of manual crimpers. It provides a....
It is equipped with a safety valve. When the pressure reaches its maximum, the pressure is automatically released to prevent overpressure..
The product is equipped with a durable yellow plastic case for easy carrying and compact storage..

Check Stock

SH-5 Tungsten Carbide Burr Rotary File Flame Shape Double Cut with 1/4 Shank for Die Grinder Drill Bit

Multi Purpose: Widely used for metalwork, tool making, engineering, model engineering, wood carving, jewellery making, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting.
Good Quality:Good processing quality, high finish. Can be processed into a variety of high-precision shape mold cavity.
Shape：Double cut Flame Shape, SH-5, Size: 3" Total length, 1/4" shank diameter, 1/2" cutter diameter, 1 1/4" length of cut.
Long Life: Made of heat-treated Solid tungsten carbide YG8 that lasts 8 times working life Durability than HSS tool，Suitable for machining various kinds of metal material including ≤HRC65 hardened steel.
Packaging：Packed with a transparent plastic tube for safety storage and protection.

Check Stock

SB-5 Tungsten Carbide Burr Rotary File Cylinder Shape Double Cut with 1/4''Shank for Die Grinder Drill Bit

Multi Purpose: Widely used for metalwork, tool making, engineering, model engineering, wood carving, jewellery making, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting.
Good Quality:Good processing quality, high finish. Can be processed into a variety of high-precision shape mold cavity.
Shape：Double cut Cylinder Shape, SB-5, Size: 2 3/4" Total length, 1/4" shank diameter, 1/2" cutter diameter, 1" length of cut.
Long Life: Made of heat-treated Solid tungsten carbide YG8 that lasts 8 times working life Durability than HSS tool，Suitable for machining various kinds of metal material including ≤HRC65 hardened steel.
PS: Non-dental Purposes, Cannot Be Used In The Medical Field..

Check Stock

SN-4 Tungsten Carbide Burr Rotary File Inverted Cone Shape Double Cut with 1/4 Shank for Die Grinder Drill Bit

Multi Purpose: Widely used for metalwork, tool making, engineering, model engineering, wood carving, jewellery making, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting.
Good Quality:Good processing quality, high finish. Can be processed into a variety of high-precision shape mold cavity.
Shape：Double cut Inverted Cone Shap, SN-4, Size: 2 1/4" Total length, 1/4" shank diameter, 1/2" cutter diameter, 1/2" length of cut.
Long Life: Made of heat-treated Solid tungsten carbide YG8 that lasts 8 times working life Durability than HSS tool，Suitable for machining various kinds of metal material including ≤HRC65 hardened steel.
Warning: Non-dental Use, Non-medical Products.

Check Stock

Yudanny Rotary Burr Set Durable Reliable 8pcs Tungsten Steel Rotary Files for Grinder Drill Metal Wood Carving Engraving

Tungsten steel grinding head: mainly used on pneumatic or electric drive tools, the speed is generally 6000- 50000 rpm.
It can process various metals ( including hardened steel ) and non- metals ( such as marble, jade, bone ), and the processing hardness can up to HRC70..
High production efficiency, dozens of times higher than processing efficiency with files, and nearly ten times higher than processing efficiency with small grinding wheels with handles..
The product has good processing quality, high smoothness, and can process high-precision mold cavities of various shapes..
Long service life, ten times higher than the durability of high-speed steel cutters, and more than 200 times higher than the durability of small grinding wheels..

Check Stock