Top Hardened Metal Reviews

Cobalt Drill Bit Set M35 High Speed Steel Twist Drill Bit Set for Hardened Metal Stainless Steel Cast Iron Woodwork Plastic (15 Pieces,1/16 Inch)

  • Quality material: the cobalt drill bit set uses cobalt M35 high speed steel as material, this material is durable, strong and practical, with a long service life, heat and abrasion resistance.
  • The cutting edge of drill bit is hardened and honed, with accurate cutting without shaking.
  • Creative twist design: metal cobalt drills for hardened steel has 135° split point tip and torsional design to improve cutting speed with self-centering ability.
  • They can avoid walking during work process, while clearing chips and particles more quickly and easily.
  • Nice features: the 1/16 inch twist drill bits have precise diameter.
  • M35 cobalt drill bits for hardened metal are not easy to break or wear out, so suitable for lithium electric drill, hand electric drill, impact electric drill, etc..
  • The size is small, please pay attention to use.
  • Various fitness: M35 high speed steel cobalt drill set is greatly suitable for hardened material and hard metals, such as cast iron, high temperature alloy, hard plastics, stainless steel, titanium alloy, woods, etc., also for soft materials.
  • What you will get: the package contains 15 pieces 1/16 inch cobalt drill bits, sufficient quantity to meet your various needs.
  • Please pay attention to speed, pressure and heat control during drill....
Check Stock

8MILELAKE Panel Flange Hole Punch and Crimping Tool 5 mm Hand Flange Punch Tool

  • Original Combined Settling Hole Pliers for depositing sheet edges and punching workpieces..
  • Handhabung without effort - one-handed operation - hardened settling jaws. Maximum power transmission with low effort..
  • Applied for the repair of the car body and most other sheet metal work..
  • Material / Pliers Body: Made of special tool steel Material / Baking: Made of special tool steel and hardened.
  • Material / stamping and dies: Made of high quality tool steel and fully through hardened.
Check Stock

Cylinder Door Rim Lock, Metal Gate Locks, Waterproof for Wooden Door Vertical Hinged Doors Iron Door

  • Exquisite workmanship, hardened metal throw bolt for cut resistance..
  • Dead bolt locks angle strike bracket furnished with angle strike for extra security..
  • The surface is processed with golden oil, waterproof and anti-rust..
  • Brass lock body is sturdy for easy and safe locking..
  • Easy to install, suitable for wooden door, iron door and other vertical hinged doors..
Check Stock

EZARC Oscillating Multitool Blade Carbide Saw Blades for Hard Material/Metal/Nails/Bolts/Screws, 3-Pack

  • Up to 30x longer lifetime with carbide teeth design..
  • A ‘MUST HAVE’ blade for tough cutting jobs on hard material..
  • Super endurance for hardened materials, e.g. hardened nails, metal cube, stainless steel and fiber glass..
  • Carbide teeth for high performance in metal and other materials..
  • Multi-Fit interface fits on most popular oscillating multi tools, two extra adapters in the package cover more tools than any other competitors on the market..
Check Stock

Milwaukee 49-56-0213 4-Inch Ice Hardened Hole Saw

  • The product is manufactured in United States.
  • Ice hardened for up to 50% longer life than the competition.
  • Matrix ii bi-metal Teeth for greater durability.
  • Radiuses tooth back reduces stress on teeth.
  • Deeper gullets for fast chip removal and functional slot geometry provides easy plug removal.
  • ICE HARDENED for up to 50% longer life than the competition.
  • Matrix II Bi-Metal Teeth for greater durability.
  • Radiused Tooth Back reduces stress on teeth.
  • Deeper Gullets for fast chip removal and Funtional Slot Geometry provides easy plug removal.
Check Stock

Milwaukee 49-56-0223 4-1/4-Inch Ice Hardened Hole Saw

  • The product is manufactured in United States.
  • Ice hardened for up to 50% longer life than the competition.
  • Matrix ii bi-metal Teeth for greater durability.
  • Radiuses tooth back reduces stress on teeth.
  • Deeper gullets for fast chip removal and functional slot geometry provides easy plug removal.
  • ICE HARDENED for up to 50% longer life than the competition.
  • Matrix II Bi-Metal Teeth for greater durability.
  • Radiused Tooth Back reduces stress on teeth.
  • Deeper Gullets for fast chip removal and Funtional Slot Geometry provides easy plug removal.
Check Stock

Milwaukee 49-56-0217 4-1/8-Inch Ice Hardened Hole Saw

  • The product is manufactured in United States.
  • Ice hardened for up to 50% longer life than the competition.
  • Matrix ii bi-metal Teeth for greater durability.
  • Radiuses tooth back reduces stress on teeth.
  • Deeper gullets for fast chip removal and functional slot geometry provides easy plug removal.
  • ICE HARDENED for up to 50% longer life than the competition.
  • Matrix II Bi-Metal Teeth for greater durability.
  • Radiused Tooth Back reduces stress on teeth.
  • Deeper Gullets for fast chip removal and Funtional Slot Geometry provides easy plug removal.
Check Stock

Milwaukee 49-56-0147 2-1/2-Inch Ice Hardened Hole Saw

  • The product is manufactured in United States.
  • ICE HARDENED for up to 50% longer life than the competition.
  • Matrix II Bi-Metal Teeth for greater durability.
  • Radiused Tooth Back reduces stress on teeth.
  • Deeper Gullets for fast chip removal and Funtional Slot Geometry provides easy plug removal.
Check Stock

Rockwell RW8930.3 1-1/8-Inch Sonicrafter Oscillating Multitool Bi-metal and Wood End Cut Saw Blade with Universal Fit System, 3-Pack

  • Use to make plunge cuts up to 1-5/8-Inch deep.
  • Make detail cuts to wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal, and hardened fillers.
  • Hardened teeth will cut non-ferrous metals.
  • Universal fit system adapts to other brands.
Check Stock

Lisle 30280 Automatic Center Punch

  • Works on metal, plastic, wood and other materials.
  • Pressure can be varied by turning the knurled knob.
Check Stock

FELCO C12/90

  • A hardened bolt and nut to assure exact adjustment of both the cutting and anvil blades.
  • Ideal pruner for light applications and easily adjustable.
  • Features strong blades with a wire cutting notch.
  • Blades are made of high-quality hardened steel.
Check Stock

Rockwell RW8971 Extended Life Precision Wood Plunge Cut Blade, 1-3/8'

  • For aggressive plunge cutting up to 1-5/8" depth in wood, plastic, drywall, fiberglass, and Hardened fillers.
  • Precision-ground, beveled tooth design for aggressive plunge cutting.
  • Bi-Metal with Hardened teeth for extended life.
Check Stock

General Tools 450-6 Flat Leg Divider, 6-Inches

  • Hardened and tempered Bow springs and fulcrum spools assure uniform tension without side play while using this flat leg divider.
  • General Tools flat leg dividers is a useful measurement transfer tool for uneven surfaces.
  • Also great for a variety of uses such as tracing contours and scribing circles into metal.
  • The forged steel legs feature hardened points for precise marking of the work piece.
  • An adjusting screw has a self-seating washer and nut to permit quick and positive adjustment.
  • Hardened and tempered bow springs and fulcrum spools assure uniform tension without side play while using this flat leg divider.
  • This flat leg divider has 6 inch legs and a 6-1/4 inch jaw capacity.
  • General Tools flat leg dividers are frequently used in conjunction with General Tools precision rulers for the most accurate measurement transfer.
Check Stock