Top Hand operated Bender Reviews

VEVOR Copper Pipe Bender, 7 Colorful Dies 1/4-7/8 inch 90 Degrees Forward and Reverse Bending, 6-22 mm for Copper & Aluminum Tubes with Reverse Bend Attachment

  • 90° Reverse Bending: The ratcheting tube bender can easily bend the diameter of 1/4 to 7/8 inch (6-22 mm) tubes both forward and reverse to 90 degrees. It allows tight 90-degree angles to be made easily out of a wall or other difficult places. Mechanical ratchet for fast and precise bending..
  • 1/4"-7/8" Bending Range: We provide 7 colorful interchangeable tube bender dies, ranging from 1/4" to 7/8". All these are made of reinforced aluminum alloy for durable use. The bending heads can meet different usage needs, making your work more convenient..
  • Durable Aluminum Alloy: The compact bender kit is made of high-quality aluminum alloy, which is corrosion-proof. Our tubing bender with good processing performance is widely used and sturdy for long service life..
  • Compact & Easy Operation: Tube bender allows bending in confined spaces and takes up little space because of its compact design. And the bender, with an ergonomic handle, is effortless to operate. Carrying box for easy storage and portability. The bender can be set up in a breeze..
  • Wide Application: The reverse tubing bender is suitable for copper, aluminum, thin-walled steel tubing, etc. It is widely used in sanitary and heating installations, floor heating, refrigeration and air-conditioning, and hyd....
Check Stock

Antstone Tubing Bender Kit with Reverse Bend 1/4"-7/8" HVAC Ratchet Copper Pipe Bender Tool Set 90° Bend with 7 Dies for Refrigerator Air Conditioner Repair

  • [Parameters] - Applicable pipe outer diameter: Φ1/4'', 5/16'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8''.
  • applicable pipes: for soft copper / brass pipes only..
  • [High Efficiency] - This pipe bender can be operated with one hand. You can save time and effort and improve work efficiency..
  • [Forward & Reverse Bending] - The pipe bender can be bent in both forward and reverse directions to meet the needs of your different workplaces..
  • [Compact & Portable] - This hvac tool kit has a compact design, making it easy to work in tight spaces, which includes: pipe bender body*1, deburring knife*1, bending groove*2, dies*7, thicken toolbox*1..
  • [Wide Application] - This tubing bender is widely used for HVAC, refrigerators, automobiles, hydraulic and pneumatic systems maintenance, etc..
Check Stock

3 in 1 Tube Bender - Yellow Jacket 60390

  • POWERFUL AND COMPACT: Bending soft metal pipes and tubing has never been easier. The proprietary design allows it to fit where others can't, while not compromising on the capability or quality of the resulting bend.
  • EASY TO SETUP: Place universal crossbar and desired color-coded mandrel on handle, snap into place, click pumping lever into ready position, and place tubing between bar and mandrel.
  • ONE-HANDED OPERATION: The ratcheting mechanism and innovative release lever allow for bending with one hand. Pump lever until desired angle is achieved, up to 90degrees. Simply press release trigger above lever to retract mandrel for easy tube release, ensuring no damage to the metal.
  • INCLUDED COMPONENTS: Bender body, crossbar, reverse bending attachment and mandrels for 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7"8 tubing.
  • 【Complete accessories】: The pipe bender kit has a variety of tools to meet different needs. The kit includes 1 x Bender, 7 x Fiber Wheel, 1 x Pipe Cutter, 2 x Flip Arm, 1 x Trimmer..
Check Stock

Hilmor Reverse Bending Attachment - HVAC Tool Tube Bender, Black, CBRBM 1890999

  • BENDER ATTACHMENT: Attach this two piece reverse bender to the Hilmor Compact Bender 1926598 (sold separately).
  • POWERFUL AND COMPACT: Bending soft metal pipes and tubing has never been easier. The proprietary design allows it to fit where others can't, while not compromising on the capability or quality of the resulting bend.
  • EASY TO SETUP: Place universal crossbar and desired color-coded mandrel on handle, snap into place, click pumping lever into ready position, and place tubing between bar and mandrel.
  • ONE-HANDED OPERATION: The ratcheting mechanism and innovative release lever allow for bending with one hand. Pump lever until desired angle is achieved, up to 90degrees. Simply press release trigger above lever to retract mandrel for easy tube release, ensuring no damage to the metal.
  • TUBE SPECIFICATIONS: Bends 1/4” to 7/8”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4” and 7/8” Tubing made of soft metals like copper, steel, aluminum, brass.
Check Stock

VEVOR Pipe Bender, 7 Dies 1/4-7/8 Inch Refrigeration Ratcheting Tube Bender Kit, 90° Tubing Bender with Reverse Bending Attachment for HVAC

  • Universal Usage: The multifunctional tubing bender is suitable for copper, aluminum, thin-walled steel tubing, etc. It is widely used in sanitary and heating installations, floor heating, refrigeration and air-conditioning, hydraulic systems..
  • 1/4"-7/8" Bending Range: We provide 7 Elbow diameter range for pipes: 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8 inch (6, 8,10,12,16, 19, 22mm). Tubing cutter with reamer and extra blade capacity:1/8 to 1-1/8-inch (3-28mm). The bending heads can meet different usage needs, making your work more convenient..
  • Kit Included: Tubing Bender x 1, Fixed Supports x 2, Tube Bender Heads x 7, Reverse Bending Tool x 1, Pipe Cutter x 1, Inner Outer Reamer x 1, Carrying Box x 1, Manual x 1. Quality machined aluminum alloy is for strength and durability..
  • Compact & Easy Operation: Tube bender allows bending in confined spaces and takes up little space because of its compact design. And the bender, with an ergonomic handle, is effortless to operate. Carrying box for easy storage and portability. The bender can be set up in a breeze..
  • 90° Reverse Bending: The ratcheting tube bender can easily bend the diameter of 6-22 mm tubes in both forward and reverse to 90 degrees. It allows tight 90 degree angles to be made easily out of a wall or ot....
Check Stock

VEVOR SBG-40 Metal Scroll Bender High-Hardened Steel Scroll Bender Combination of Scroll Radius and Angle Bending Universal Metal Rod Bender For Steel Brass Cooper Aluminum

  • 5/8" Bending Capacity: The bender can easily and smoothly bend max thickness stocks the diameter of 5/8" tubes. And The metal bending tool is made of high-hardness steel.
  • it can be used for a long time. The heavy base improves stability during operation..
  • 3 in 1 Bender: Our bender has a multi-function of bending. It can achieve angle bending, radius bending and scroll bending. Thus, the machine can meet different usage needs, making your work more convenient..
  • Different Shape of Materials: The product is able to bend different metal materials such as steel, wrought iron, brass, copper, aluminum, etc. Max flat steel size: 1-3/16" x 5/16"(30 x 8 mm), max round steel size: 5/8" (15.8 mm) , max square steel size: 19/32" (15 mm)..
  • Energy-saving Structure: The metal bender adopts long handle with ergonomic design for effortless operation. At the same time, this iron bender machine has a wide support surface. It can be installed on a bracket or simply on the ground..
  • Universal Usage: A multifunctional steel bender machine produces grids, gates, balcony railing, patio furniture, iron lamps, power construction, road building, bridges pipeline laying or repairing, etc..
Check Stock

AMZCNC Compact Bender Kit with Reverse Bending Attachment for 1/4 - 7/8 Tube and Pipe Bending Premium Ratcheting Tube Bender

  • 【High quality material】: The main body of the tube bender of The copper tube bending tool kit is made of stainless steel, which is pressure....
  • 【Wide range of application】: This pipe bender tool kit is suitable for pipe benders of 1/4"-7/8", applicable pipe materials: copper pipe, aluminum....
  • 【Easy to install】: The pipe bender is easy to install, easy to assemble and operate, and easy to get started. Support pipe diameter: 1/4.
  • 【Ergonomic design】: CT-999 pipe bender conforms to ergonomic design. The kit is made of 304 stainless steel, steel fiber, iron and other....
  • 【Complete accessories】: The pipe bender kit has a variety of tools to meet different needs. The kit includes 1 x Bender, 7 x Fiber Wheel, 1 x Pipe....
Check Stock

Mophorn 1/4 to 7/8inch Tubing Bender 7 Heads Nylon Hydraulic Pipe Bender Copper 90 Degrees Multi-function 6-22mm Manual Ratcheting Tubing Bender Set with Bending Function Carrying Box

  • 90° Tube Bending: The ratcheting tube bender can easily and smoothly bend the diameter of 6, 8, 10, 12,16, 20, 22 mm tubes to 90 degrees. Mechanical....
  • 1/4"-7/8" Bending Range: We provide 7 interchangeable tube bender heads, ranging from 1/4" to 7/8". All these are made of reinforced aluminum alloy....
  • Durable Aluminum Alloy: The compact bender kit is made of high-quality aluminum alloy, which is corrosion-proof. Our tubing bender with good....
  • Compact & Easy Operation: Tube bender allows bending in confined spaces and takes up little space because of its compact design. And the bender, with....
  • Wide Application: The reverse tubing bender is suitable for copper, aluminum tubes. It is widely used in sanitary and heating installations, floor....
Check Stock

ICOOL Tube Bender 3 in 1 Manual Tubing Bending Tools 0-180 Degrees 1/4 5/16 and 3/8 Inch for Copper Aluminum Brass and Thin Stainless Steel Pipes

  • 【3 in 1 Capacity】According to the angle you require from 0-180 degrees, this pipe bender is a 3 in 1 tool and will fit 1/4, 5/16, 3/8 inches (6,....
  • 【Sturdy Tool】High visibility markings 0-180 degrees design can avoid denting and collapsing your tubes. Quality machined aluminum alloy is for....
  • 【Ergonomic Frame Design】Ergonomic wide hook grips, equipped with non-slip long knurled grip handles, help bender pipes quickly, effectively and....
  • 【Versatile Tools】This tube bender with high-quality, heavy duty steel will efficiently bend copper, brass, aluminum and thin stainless steel pipes....
  • 【Easy To Operate】The manual pipe bender, made with high precision and premium machining quality, is portable and easy to operate with user manual..
Check Stock

ICOOL Tube Bender 3 in 1 Manual Tubing Bending Tools 0-180 Degrees 1/4 5/16 and 3/8 Inch Matte Surface for Copper Aluminum Brass and Thin Stainless Steel Pipes

  • 【3 in 1 Capacity】According to the angle you require from 0-180 degrees, this pipe bender is a 3 in 1 tool and will fit 1/4, 5/16, 3/8 inches (6,....
  • 【Sturdy Tool】High visibility markings 0-180 degrees design can avoid denting and collapsing your tubes. Quality machined aluminum alloy is for....
  • 【Ergonomic Frame Design】Ergonomic wide hook grips, equipped with non-slip long knurled grip handles, help bender pipes quickly, effectively and....
  • 【Versatile Tools】This tube bender with high-quality, heavy duty steel will efficiently bend copper, brass, aluminum and thin stainless steel pipes....
  • 【Easy To Operate】The manual pipe bender, made with high precision and premium machining quality, is portable and easy to operate with user manual..
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

Mophorn YP-9 Manual Bench Top Compact Bender Pipe Bending Machine 7 Dies 1-3inch Metal Fabrication Tube Rod Pipe Bender 44ft Mount Powdercoat Telescoping Handle Maximum 5/8 Thick 1-15/16inch Width

  • 5/16" Bending Range: The bender can easily and smoothly bend max thickness stocks the diameter of tubes. And The metal bending tool is made of A3 high-hardness steel.
  • it can be used for a long time. The heavy base improves stability during operation..
  • 7 Superior Steel Dies: We provide 7 interchangeable tube bender dies, ranging from 1" to 3". All these are made of reinforced steel for durable use. The bending heads can meet different usage needs, making your work more convenient..
  • Different Shape of Materials: The product is able to bend different metal materials such as steel, wrought iron, brass, copper, aluminum, etc. And it can bend different shape of material, such as flat stock, round stock, square stock..
  • Energy-saving Structure: The metal bender adopts a long handle with ergonomic design for effortless operation. At the same time, this iron bender machine has a wide support surface. It can be installed on a bracket or simply on the ground..
  • Universal Usage: A multifunctional steel bender machine produces grids, gates, balcony railing, patio furniture, iron la....
Check Stock