Top Hand Movement Reviews

31 mm Long Shaft Quartz Clock Movement DIY Clock Repair Kit (Black)

  • Long spindle clock: good handwork DIY clock replacement movement parts with metal hook, which meet your installation needs.
  • Movement size: shaft length is 31 mm (1-1/ 5 inch).
  • Jump second movement, suitable for 16 - 21 mm (5/ 8 - 4/ 5 inch) thickness clock panel.
  • Center of hole hand size: hour hand is approx. 90 mm (3.5 inch).
  • minute hand is approx. 120 mm (4.7 inch).
  • Wide application: they are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable for DIY quartz wall clock replacement movement parts, etc..
  • Warm notice: when you install it, please keep the hour hand and minute hand parallel.
Check Stock

New 12888 Quartz 24 Hour Clock Movement Mechanism Motor 9.5mm Gold Thread

  • 12888 Quartz 24 hour medium spindle movement suitable for clock faces up to 6mm thick.
  • Gold thread length 9.5mm - Total shaft length 17mm - Thread width 7.6mm.
  • Movement dimensions - Height 55mm - Width 55mm - Depth 16mm.
  • Movement is only suitable for a 24 hour clock dial, the hour hand will move at half the speed of a normal 12 hour standard clock movement.
  • Suitable with a hour hand hole size of 5.00mm and a minute hand hole size of 3.1mm.
  • Complete with fittings (hands not included).
Check Stock

High Torque I Shaft Hands Quartz DIY Wall Clock Movement Mechanism with 9.1 Inch Long Spade Hand Battery Operated Repair Parts Replacement, 1/2 in Max Dial Thickness, 9/10 in Total Length

  • ✔️ High torque clock movement with metal hook: I shaft, drive long clock hands (10 mm to 450 mm), with 230 mm/ 9.1 inch long hand to fit dials up to 56 cm/ 22 inches in diameter. Good for repairing, replacing or making a clock by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well..
  • ✔️Accurate time-keepingmotor:Size- total shaft length is 23 mm (9/ 10 inches), thread length is 15.4mm (3/ 5 inches).
  • suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches)thickness clock panel.
  • Jump second movement, high torque motor available. Features high precision clock mechanism, which offers watchmaker's accuracy and dependability.
  • ✔️Size from the center of the hole to the tip: the hour hand is approx. 175 mm/ 6.9 inches long.
  • The minute hand is about 230 mm/ 9.1 inches in length..
  • ✔️ Compatible clock: applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc. INSTRUCTIONS - Included along with the movements..
  • ✔️ Warm notice: when you install this clock movement kit, please keep the hour hand and minute hand parallel, a....
Check Stock

High Torque I Shaft Hands Quartz DIY Wall Clock Movement Mechanism with 9.1 Inch Long Spade Hand Battery Operated Repair Parts Replacement, 3/10 in Max Dial Thickness, 4/5 in Total Length

  • ✔️ High torque clock movement with metal hook: I shaft, drive long clock hands (10 mm to 450 mm), with 230 mm/ 9.1 inch long hand to fit dials up to 56 cm/ 22 inches in diameter. Good for repairing, replacing or making a clock by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well..
  • ✔️Accurate time-keeping motor:Size-total shaft length is 20 mm (4/ 5 inch), thread length is 11.7 mm (9/ 20 inches).
  • suitable for 4 - 8 mm (4/ 25 - 3/ 10 inch) thickness clock panel.
  • Jump second movement, high torque motor available. Features high precision clock mechanism, which offers watchmaker's accuracy and dependability.
  • ✔️Size from the center of the hole to the tip: the hour hand is approx. 175 mm/ 6.9 inches long.
  • The minute hand is about 230 mm/ 9.1 inches in length..
  • ✔️ Compatible clock: applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc. INSTRUCTIONS - Included along with the movements..
  • ✔️ Warm notice: when you install this clock movement kit, please keep the hour hand and minute hand parallel, and....
Check Stock

12888 High Torque Quartz Clock Movement Replacement Parts with 350 mm / 13.78 Inch Long Spade Hands

  • Clock movement replacement: high torque clock with hook, long shaft, drive long clock hands (10 mm to 450 mm)..
  • Movement size: Total shaft length is 23 mm (29/32 inch),thread length is 12 mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel..
  • Center of hole hand size: hour hand is approx. 174 mm (6.85 inch).
  • Minute hand is approx. 350 mm (13.78 inch).
  • Second caps is approx. 7 mm (0.28 inch)..
  • DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames..
  • Warm notice: when you install them, please keep the hour hand and minute hand parallel.
  • And please do not use too much pressure to avoid bending them..
Check Stock

Youngtown High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands

  • Clock movement replacement: high torque clock with 2 hooks, long shaft, drive long clock hands (10 mm to 450 mm)..
  • Movement size: Total shaft length is 23 mm (29/32 inch), thread length is 12mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel..
  • Size from the hole center to the tip: the hour hand is approx. 203 mm/ 8.0 inches long.
  • The minute hand is about 305 mm/ 12 inches in length..
  • DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames..
  • Warm notice: when you install them, please keep the hour hand and minute hand parallel.
  • And please do not use too much pressure to avoid bending them..
Check Stock

Rehabilitation Robot Gloves Upgrade Hemiplegia Hand Stroke Recovery Equipment with USB Chargeable and Strength Adjustment,Finger Hand Exercise Recovery Equipment (Right Hand XXL)

  • ...ly Rehabilitation Training Plan and Directional Training, Including Flexion, Extension and Grasping..
  • 【Mirror Image Training】Upgrade Rehabilitation Robot Gloves Using The Mirror Principle, The Flexion and Extension Of The Healthy Hand Drive The Affected Hand To Imitate Movement and Restores The Actual Activity Continuous Imitation and Re-Learning Can Effectively Promote The Self-Recovery..
  • 【Split Finger Training】Rehabilitation Robot Gloves Single Finger Flexion Movement Of The Hand Can Be Controlled By A Rotary Switch， Effective Exercise For Finger Weakness, Spasticity, and Finger Grasping..
  • 【Hand Grip Training】Stroke Recovery Equipment Intelligently Imitate Hand Movements, Imitate Hand Structure Production, Independent Movement Grasping, Intelligently Imitate Hand Grasping, Extension Flexion and Other Actions Alleviate Hand Spasm, Stiffness and Other Problems..
  • 【Easy To Store Carry】500g Body Can Be Easily Taken, Available anytime, anywhere.After Putting On The Glove, The Hand Will Follow The Flexion and Extension Of The Glove Under The Push Of The Air Pump. ....
Check Stock

TIKROUND Youngtown 12888 High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands (Gold 1 Set)

  • Clock movement replacement: high torque clock with 2 hooks, long shaft, drive long clock hands (10 mm to 450 mm)..
  • Movement size: Total shaft length is 23 mm (29/32 inch), thread length is 12mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel..
  • Size from the hole center to the tip: the hour hand is approx. 203 mm/ 8.0 inches long.
  • The minute hand is about 305 mm/ 12 inches in length..
  • DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames..
  • Warm notice: when you install them, please keep the hour hand and minute hand parallel.
  • And please do not use too much pressure to avoid bending them..
Check Stock

Hicarer 28 mm Long Shaft Quartz Clock Movement Clock Parts Repair Kit (Silver)

  • Convenient metal hook: delicate spindle quartz clock replacement movement parts with metal hook, which is convenient to use.
  • Size detail: movement shaft is 28 mm/ 1-1/ 10 inches ling, thread length is 20.4 mm/ 4/ 5 inches.
  • Jump second movement is suitable for 12 - 16 mm/ 12/ 25 - 5/ 8 inches thick clock panel.
  • Center hole to the tip length: hour hand is approx. 85 mm/ 3.3 inch.
  • Match power: small power consumption, just need 1 of 1.5 V AA battery that can run a long time.
  • Warm notice: battery is not included in the package.
  • Package detail: includes hardware, hanger, 3 hands and protect cardboard box and instructions, make your DIY clock project successful.
Check Stock

Hicarer 28 mm Long Shaft Quartz Clock Movement Clock Parts Repair Kit (Red)

  • Convenient metal hook: delicate spindle quartz clock replacement movement parts with metal hook, which is convenient to use.
  • Size detail: movement shaft is 28 mm/ 1-1/ 10 inches ling, thread length is 20.4 mm/ 4/ 5 inches.
  • Jump second movement is suitable for 12 - 16 mm/ 12/ 25 - 5/ 8 inches thick clock panel.
  • Center hole to the tip length: hour hand is approx. 85 mm/ 3.3 inch.
  • Match power: small power consumption, just need 1 of 1.5 V AA battery that can run a long time.
  • Warm notice: battery is not included in the package.
  • Package detail: includes hardware, hanger, 3 hands and protect cardboard box and instructions, make your DIY clock project successful.
Check Stock

Quartz Pendulum Trigger Clock Movement Chime Westminster Melody Mechanism Clock Kit with 3 Pairs of Hands

  • What you get: in our pendulum clock movement set, you will receive 3 pairs of hands, pendulum, trigger clock movement, chime music box, mounting hardware and instructions, meet your different needs and replacement.
  • Pendulum clock movement size: total shaft length is 17 mm/ 0.67 inch, the thread length is 9.7 mm/ 0.38 inches.
  • Jump second movement, which is suitable for 2-6 mm/ 0.08-0.24 inches thickness clock panel.
  • Hole center to the tip hand size: the hour hands measure approx. 70.5 mm/ 2.78 inch, 70 mm/ 2.76 inch and 82 mm/ 3.2 inch, the minute hands measure approx. 101 mm/ 3.98 inch, 92 mm/ 3.6 inch and 117 mm/ 4.6 inch, and 2 second hand are approx. 100 mm/ 3.9 inch, 1 second cap is approx. 7 mm/ 0.28 inch.
  • Melody effect: the chiming pendulum movement plays the Westminster melody on the hour, automatically silences the chimes after 9 o'clock pm until 6 o'clock am.
  • Practical tools for you: these pendulum trigger clock movement replacement parts are practical for you to design and make your own pendulum clock, help you to replace and change a different look.
  • Please notice that the hands are made of aluminum, don't install them with too much pressure or they will be bent.
Check Stock

Quartz DIY Wall Clock Movement Mechanisms Battery Powered DIY Repair Parts Replacement with 260 mm/ 10.2 Inch Long Spade Hands,3/10 Inch Maximum Dial Thickness,29/32 Inch Total Shaft Length.

  • Clock movement replacement: high torque clock with hook, long shaft, drive long clock hands (10 mm to 450 mm)..
  • Movement size: Total shaft length is 23 mm (29/32 inch),thread length is 12 mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel..
  • Center of hole hand size: hour hand is approx. 187 mm (7.4 inch).
  • Minute hand is approx. 260 mm (10.2 inch).
  • Second caps is approx. 7 mm (0.28 inch)..
  • DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames..
  • Warm notice: when you install them, please keep the hour hand and minute hand parallel.
  • And please do not use too much pressure to avoid bending them..
Check Stock

Quartex Spacekid & Andre Wildenhues Extended

  • Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock..
  • Parameter: "I" Shaft,drive long clock hands (10 mm to 450 mm).
  • Total shaft length is 18 mm (45/64 inch), thread length is 5 mm (13/64 inch),suitable....
  • DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick....
  • Package contents: 1 clock movement with 1 hook,2 Hour hands,2 Minute hands and some mounting hardware, coming with specially designed box and....
  • Warm notice: when you install them, please keep the hour hand and minute hand parallel.
  • And please do not use too much pressure to avoid bending them..
Check Stock