Top Hammer Drive Anchor Reviews

CONFAST 1/4 x 3 Split Drive Flat Zinc Plated 100 per Box

  • TAMPERPROOF-Anchor cannot be removed to provide security for item being attached.
  • ZINC PLATED-Provides rust resistance for dry applications.
  • FOR CONCRETE ONLY-Fast, easy and strong fastening into solid concrete.
  • NO SPECIAL TOOLS NEEDED-Drill the hole drive with a hammer.
Check Stock

CONFAST 1/4 x 2 Split Drive Flat Zinc Plated 100 per Box

  • TAMPERPROOF-Anchor cannot be removed to provide security for item being attached.
  • ZINC PLATED-Provides rust resistance for dry applications.
  • FOR CONCRETE ONLY-Fast, easy and strong fastening into solid concrete.
  • NO SPECIAL TOOLS NEEDED-Drill the hole drive with a hammer.
Check Stock

2000pcs 1/4 x3/4 Hammer Drive Anchor Zinc Alloy with Zinc Plated Steel Nails inch Size 1/4 Length 3/4

  • HAMMER DRIVE ANCHOR, ZINC ALLOY WITH ZINC PLATED STEEL NAILS (INCH).
Check Stock

Hard-to-Find Fastener 014973285432 Nylon Mushroom Nail Drive Anchors, 1/4 x 3/4, Piece-100

  • TAMPERPROOF-Anchor cannot be removed to provide security for item being attached.
  • ZINC PLATED-Provides rust resistance for dry applications.
  • FOR CONCRETE ONLY-Fast, easy and strong fastening into solid concrete.
  • NO SPECIAL TOOLS NEEDED-Drill the hole drive with a hammer.
Check Stock

Wej-It Nail-It DN1412 Drive Anchor Zamac Alloy Zinc Plated Finish Meets GSA FFS-325 Group V Type 2 Class 2 Specifications 1/4 Diameter 1-1/2 Length Pack Of 100

  • Drive anchor provides a secure hold in concrete, block, brick, and stone.
  • Anchor consists of a zamac alloy body and a cold rolled steel pin, which drives in with a hammer (sold separately) to expand and grip the mounting material.
  • Meets Fed. Spec. GSA FFS-325 Group V, Type 2, Class 2 specifications.
  • Ultimate tensile strength for a static load is 800 lb. in 3,000-psi unreinforced stone aggregate concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

100 Pcs 1/4 x 3 Heavy Duty Nail Drive Anchors Rustproof Drive Pins Zinc Plated Drive Anchors for Metal Steel Aluminum Angles Wood Concrete Hammer Fasteners Kit

  • A Box of 100: there are 100 pcs of 1/4" x 3" drive nail anchors in the package, plenty enough to use and replace to easily meet your daily and party needs.
  • Size Information: with a size of approximately 1/4" in diameter and 3" in length, this heavy duty nail drive anchor requires drilling a 1/4" diameter hole in concrete prior to installation.
  • Please confirm the size before placing an order.
  • Strong and Reliable: featuring zinc plated steel material, heavy duty drive nail in anchors are strong and reliable, not easy to break, deform, bend or rust, easy to serve you for a long time.
  • Practicality: these zinc plated nail drive anchors can fasten sheet metal, steel, aluminum angles, wood, etc., to concrete, ideal for structural anchoring, shelf anchoring, mechanical and handrail installations.
  • Easy to Install: 1/4 x 3" drive anchors are simple to apply, hit them into the reserved hole with a hammer, and they can be easily installed without additional tools, saving time and effort.
  • Note: anchors cannot be taken out after use, please confirm the insertion point before use.
Check Stock

Worldity 200Pcs Self Drilling Drywall Anchors with Screws, Drywall Anchors Tapping Screw Kit, No Drill or Holes in Wall, Self-Drilling Drywall Anchors for Fixing Picture, Cabinet, TV Shelf -70lb

  • ...d, it is divided into two parts to better fix on the wall. The drywall anchors screw’s flat shape design, leaves only a small gap in the drywall when you remove it, convenient for you to repair later..
  • EASY TO INSTALL: Without using a hand drill to drill holes,only use a hammer to drive the ribbed anchors into the wall, then insert screws, and finally tighten the screws with a screwdriver until they are fixed.It can be completed within 30 seconds, improving work efficiency..
  • WIDELY USED: Very suitable for fixing curtains, home pictures hanging, closets, clapboard brackets and and TV wall brackets ect. Especially for apartment dwellers and anyone who rents (or manages rentals) to hang your art and pictures while minimizing damage and repair to drywall..
  • SIZE & PACKAGE: The metal drywall anchor size is 1.18 "x 0.39", and the screws size is 1.18 "x 0.15". You will receive 100 anchors and 100 screws. If you have any satisfaction, we provide 360 days free replacement service, so you can buy with confident..
Check Stock

P-Set - P38OH 3/8\ Drop-in Anchor Setting Tool

  • Designed, manufactured and patented in the USA.
  • Materials and components sourced from US companies.
  • Hands free anchor setting -- only use the hammer hand (even overhead).
Check Stock

uxcell® M6x45mm Zinc Plated Hammer Drive Anchor Expansion Bolt Fastener 8pcs

  • Total Length(Not Included Nail): 45mm/1.8".
Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

CycleOps Hammer Direct Drive Smart Trainer

  • Lifetime warrantyDescriptionWhile your friends painstakingly negotiate with neighbors and significant others for limited hours of ear-assaulting wheel-mounted indoor trainer time or risk frost bite to round out the required ride time, you'll be dialed in and crushing out watts on your CycleOps Hammer Direct Drive Trainer. The direct drive design saves wheel and tire wear for the road and carries claims of being "quiet enough to ride in a library," which means you can get your intervals in and keep important relationships intact. The secret to the Hammer is a massive, 20-pound flywheel that utilizes electromagnetic resistance to deliver a smooth, realistic riding experience. While no indoor trainer can ever exactly mirror outdoor ride feel, the Hammer is about as close as you can get. It's able to simulate riding grades of up to 20% and is built to handle up to 2,000 watts, which means even the best pro riders won't be able to max the Hammer out. For the rest of us, it means that this trainer has the range of capability to knock out any workout intensity our coach adds to the schedule. Using PowerTap technology, the Hammer is PowerTuned to provide power readings with a +/-3% accuracy while internal cooling mechanisms ensure readi....
Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Hilitchi 192-Pcs [7-Sizes] Ribbed Plastic Anchors Assortment Kit with Philips Self-Tapping Screws Set for Drywall

  • ...ng a towel hook in the bathroom, hanging up other items or fixing many things around your house. They can be used in concrete, block, brick, and wallboard. Great value and a great asset to have handy for the house projects..
  • ★【HOW TO USE】Drill a hole (depth and diameter in sync with the anchor) with a electric hammer drill, and then insert the anchor through the hole gently. Finally twist the self-tapping screw clockwise with a hammer or screwdriver. Ribs on both side of the anchor serve the function of stabilising anchor tightly in the wall when twisting the screw in. At the same time, the split of anchor would expand to create a snug fit into the wall. So this could provide more holding power..
  • ★【QUALITY AFTER-SALE SERVICE】If you do not satisfy with our products or if you have any questions, please come to us, we would reply you within 12hours. We 100% guarantee to solve all the problems to your satisfaction. FREE REPLACEMENT within 90days..
Check Stock