Top H beam Tack Welding Reviews

WYNNsky Magnetic Welding Support Ground Clamp, 2pcs Set, Single and Double Welding Head, Copper Tail

  • Design: This magnetic clamp attaches easily to any smooth metal surface, flat or curved. It holds on tightly, without budging easily. Super suction magnet at the bottom, large suction power, long-lasting magnetism..
  • Application: This device serves as the ground point, which you can take with you anywhere. Simply tack this onto a convenient spot, hook up your safety wire and you're ready to weld..
  • Material: The welding magnet head adopts high quality material, durable and solid. Has brass tail has good welding stability, durable, anti-rust, has good performance and long service life..
  • Advantage: This magnetic clamp is handy to have in such situations. You can stick in on a car body and not have to damage the paint. The clamp can also be attached to metal poles, struts, railings or the welding table..
  • Including 1pc Single Head Magnetic Welding Ground Clamp.
  • 1pc Double Head Magnetic Welding Ground Clamp.
  • 1pc Copper Tail Welding Stability Clamps..
Check Stock

Forney 30705 E7018 Welding Rod, 3/32-Inch, 5-Pound

  • All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
  • Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues.
  • Not recommended for use with low open circuit-Voltage OCV power sources.
  • Excellent for tack welds and out of position welding.
  • Ideal for general fabrication of cold roll steels.
  • Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
Check Stock

E6013 - General Purpose/Mild Steel - Welding Electrode/Rod - 14" x 1/8" (PACK: 44 LB)

  • All-position, mild steel electrode for welding light to medium-gauge steel. Common uses include tack welding on thin sheet metal such as galvanized sheets, automobile bodies, metal furniture, window frames, fences, storage tanks, farm equipment and iron grills.
  • Excellent operating characteristics when using small diameter electrodes to weld thin sheet metal using lower open-circuit AC voltage.
  • One of the easiest electrodes to use because of its easy slag control in vertical down welding, its wide operating range and restrike capabilities.
  • This electrode has a soft, steady and quiet arc that produces very little smoke or spatter.
  • Select your Electrode Diameter and Package Quantity from the Options - Check Picture #3 for Welding Parameters..
Check Stock

Holulo Auto Darkening Welding Goggles with Clear Inner Lenses Welding Helmet Solar Welder Eyes Glasses Flip Up Lens Eye Protection (Dark Green)

  • Great goggles are a really nice alternative to a traditional welding helmet,They are comfrotable, lightweight for welding in tight spaces.Apply to observation or quick tack welds,Spot Welding, gas welding, cutting..
  • Better clarity, True color viewing,The welding goggles automatically changes from a bright state to a dark state when an arc is generated, and returns to a bright state when the welding stops, providing each worker with a clear view to release their hands..
  • Good protection,protect the eyes from sparks.It also features anti-ultraviolet, infrared radiation, anti-glare, can well protect your eyes during works..
  • Adjustable the length of the legsof the glasses, very comfortable to wear for long time and will not slip easily,easy to operate,Ideal for use with hard hats..
  • 2xProtection lenses,change lens regularly to ensure the best working condition.Before installing on the Welding Glasses, be sure to tear off the protective film on both sides of the surface..
Check Stock

HUGEWELD Tig Welder TIG-200,HF TIG/Stick/Arc 2 in 1 TIG Welders,200 Amp 220V TIG Welding Machine,IGBT Inverter Portable Digital Display for Beginner

  • ✅【2 in 1 HF START】TIG200 is high frequency(HF) ignition, stable arc,simple to operate. The conversion efficiency of the whole machine is increased by more than 30%..
  • ✅【IGBT INVERTER】Use the single tube IGBT (the inverter frequency can reach 25-50KHz) to convert 50/60Hz to dc and then to high frequency and lower voltage,portable only 12.54 lbs, 13x6.3x11.4" size !.
  • ✅【2T & 4T 】2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T. 2T is suitable for the re-tack welding, transient welding or thin plate welding. 4T is suitable for welding medium thickness plates..
  • ✅【SAFETY and ENERGY SAVING】Automatic Compensation with Voltage Fluctuation, Over-voltage protection, Under Voltage Protection, Over Current Protection, Over Load Protection,Fan dormancy..
  • ✅【EXCELLENT WELDING PERFORMANCE】 Tig welding thickness 0.5-5.0mm under 10-200A output.
  • application of tungsten electrodes diameter: 1.0/1.6/2.0/2.4/3.0mm. Suitable for welding different metals such as steel, stainless steel, carbon steel etc. (Can’t weld aluminum). ARC welding thickness 2.0-8.0mm under 20-150A current , application of electrodes diameter: 2.5/3.2mm..
Check Stock

Master Appliance ProHeat Series Plastic Welding Kit with Variable Temp Heat Gun & Starter Welding Rods, 1000-Degree Fahrenheit 120V 1300 Watts

  • Get tough work done: The heat gun’s compact, lightweight design enables you to efficiently hot air weld thermoplastics such as rigid and flexible plastics, tarps, liners, covers, tents, inflatables and more.
  • Dial-in control: Use the heat gun’s LCD display and innovative magnetic key to seamlessly set, adjust and lock airflow and temperature between 130F-1000F.
  • Everything you need: Kit includes the PH-1400 Dial-in Electric Heat Gun, a welding rod assortment, and five tips for specific welding applications that use heat and pressure: speed, pendulum, mirror and tack welding.
  • Engineered in the USA: With 1300 watts of power, our heavy-duty heat gun and welding system can meet the challenges of all sorts of environments and applications, including welding flooring materials and plastic bumper repair.
Check Stock

Architectural Products by Outwater 3P5.29.00065 Faux Wood Beam Strap, Black

  • Replica of authentic forged wrought iron.
  • Push a thumb tack through the strap into the beam.
  • allow adhesive to dry then remove thumb tack.
Check Stock

TRRAPLE Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, 2/4 Pcs Durable Stainless Steel Tab Holder Corner Butt Welding Panel Clamps Tools

  • HIGH QUALITY WELDING CLAMPS -- Our v-type magnetic welding clamps are made of made of high quality stainless steel, sturdy and durable, can be used for a long time..
  • MAGNETIC HOLDERS -- One rare earth magnets in each pad provide secure gripping power for rapid, and convenient, holding and positioning..
  • EASY TO USE -- Pads pivot to hold onto round, square, or flat metal surfaces, easy to install and apply..
  • PERFECT SPOT WELDING CLAMP -- Hold tabs, gussets, plates and odd shaped pieces in position for tack welding..
  • WIDELY APPLIED -- Widely used on doors, tool boxes, windows, wooden case, furniture and so on..
Check Stock

YESWELDER True Color Solar Powered Auto Darkening Welding Goggles, 2 Sensors Welder Glasses for TIG MIG MMA Plasma

  • Great Welding Goggles for TIG MIG MMA,Apply to observation or a few quick tack welds.
  • Viewing Size 4.29 x 1.28 inch with 2 Premium Sensors.
  • Compact design allows users to weld in spaces where access with traditional welding helmets is limited.
Check Stock

MUCCKEN 16 Pairs Vampire Teeth with Adhesive, 4 Size Halloween Decorations Vampire Fangs, Halloween Party Cosplay Props (13mm,15mm,17mm,19mm)

  • The G5-01 welding filter features 3M Natural Colour technology which makes the filter view seem lighter, more detailed and colourful. Auto-ON/OFF..
  • Speedglas welding filter G5-01 offers variable dark shades 5, 8-13 and tack welding comfort mode. May be utilized for most types of arc welding..
  • The big (104 x 170 mm), clear protective visor is curved, with excellent views up, down and peripherally..
  • For more control over your comfort, the innovative G5-01 helmet airflow optimization system lets you direct the airflow to either your face, visor or somewhere in-between..
  • Re-configure your helmet using many of our additional accessories to find the right coverage and protection for you. Some of these optional accessories include: task light assembly, 1000 Assigned Protection Factor (APF) assembly, high-visibility head cover, leather head/neck cover, and more..
Check Stock

3M Speedglas Heavy-Duty Welding Helmet G5-01 w ADF G5-01 and 3M Adflo High-Altitude PAPR Assembly, 46-1101-30i

  • The G5-01 welding filter features 3M Natural Colour technology which makes the filter view seem lighter, more detailed and colourful. Auto-ON/OFF..
  • Speedglas welding filter G5-01 offers variable dark shades 5, 8-13 and tack welding comfort mode. May be utilized for most types of arc welding..
  • The big (104 x 170 mm), clear protective visor is curved, with excellent views up, down and peripherally..
  • For more control over your comfort, the innovative G5-01 helmet airflow optimization system lets you direct the airflow to either your face, visor or somewhere in-between..
  • Re-configure your helmet using many of our additional accessories to find the right coverage and protection for you. Some of these optional accessories include: task light assembly, 1000 Assigned Protection Factor (APF) assembly, high-visibility head cover, leather head/neck cover, and more..
  • For industrial/occupational use only. Not for consumer sale or use.
Check Stock

Forney 30681 E7018 AC Welding Rod, 3/32-Inch, 5-Pound

  • All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
  • Excellent bead contour, light spatter and slag is often self cleaning.
  • Good performance with low open circuit-Voltage OCV power sources.
  • Excellent for tack and skip welds, offers easy re-striking, ideal for out of position welding.
  • Ideal for shops, farms, hobbyist, and DIY welders.
  • Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
Check Stock

FOITECHY 4 Pcs Magnetic Welding Clamps,Adjustable V Type Welding Clamps,Adjustable V-Type Fixture,Magnetic V Pads Kit, Magnetic V-sharp Tab Holder Corner for Tack Welding

  • 1.djustable V-Type Fixture Clamp: Magnetic welding clamps provide secure gripping power for rapid,hold and position round, flat, and square parts in light duty substructure applications.
  • 2.4 Pack strong hand magnet(XDV4: 2"),Pull Force 12 lbs. Our V-type magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.
  • 3.The V-type magnetic welding clamps are suitable for holding tabs, gussets, plates and odd shaped pieces in position for tack welding. They are widely used in doors, tool boxes, windows, wooden boxes, furniture, and other equipment..
  • 4.Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F.
Check Stock